NVT NV-218A-PVD Video Data Transceiver
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ Video Attenuation :0.5 dB typ
→ Video Common-mode / Differential-mode rejection 50 KHz to 10 MHz: 60 dB typ
→ Video Impedance Coax, male BNC: 75 ohms
→ Video Impedance UTP, Screwless terminal block: 100 ohms
→ Video Impedance UTP RJ45 Data Connector: 100 ohms
→ Network Wiring: One Unshielded Twisted Pair Terminal Block 24-16 AWG (0,5-1,31mm), RJ45 24-22 AWG (0,5-0,64mm)
→ Wire Category Type: 2 or better
→ Wire Impedance: 100 ± 20 ohms
→ Wire DC Loop Resistance: 52 ohms per 1,000ft (18 ohms per 100m)
→ Wire Differential Capacitance: 19 pF/ft max (62 pF/m max)
→ Temperature: -22 to +167°F (-30 to +75 °C)
→ Humidity (non-condensing): 0 to 95%
→ Transient Immunity: per ANSI / IEEE 587 C62.41
→ Body Length: 1.50in (38mm)
→ Body Depth: 0.85in (22mm)
→ Body Height: 1.54in (39mm)
→ Pigtail Length: 9in (228mm)
→ Product Weight: 2.0oz (60g)
→ Packaged Weight: 0.18lb (82g)
→ Power-Video-Data (PVD TM) signals are routed via UTP and RJ45 or screwless terminal block for organized pass-through of inputs/outputs
→ Mini-coax pigtail supports in-camera mounting in most dome cameras
→ Use with NVT's PVD TM Power Supply Hubs and Cable Integrators
→ Up to 3,000ft (1km) with a NVT DigitalEQ TM Hub or active receiver, (see Power Distance Chart)
→ Up to 1,500ft (460m) with a NVT StubEQ TM Hub
→ Frequency response DC to 10MHz (see Recommended Distance Chart)
→ Exceptional interference rejection
→ Built-in transient protection
→ Limited lifetime warranty
The NVT Video Data Transceiver NV 218A PVD with Power and Data is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.
This new product incorporates the transceiver engine of NVT's popular NV-214A-M video transceiver with the added value of Power and Data connections to and from the camera. Power, Video and Data are routed via UTP and RJ45 or screwless terminal block inputs/outputs. Used at the camera,
the passive NV218APVD has a 9" mini-coax mini lead for direct video output connection from the camera. Along side this coax lead are two sets of screwless terminal blocks for quick pass through connections for your camera's Power and Data. On the "house" or output side of the product you have the option of using convenient screwless UTP connectors or the more efficient RJ45.
The unparalleled interference rejection and low emissions of the NV-218A-PVD allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. The NV-218A-PVD carries a
limited lifetime warranty and is UL and cUL listed.
