NVT NV-226J-PV UTP Video Passive Transmitter +12VDC Converter

→ Video Frequency response DC to 10 MHz
→ Video Attenuation 0.5 dB typ
→ Video Common-mode / Differential-mode rejection: 50 KHz to 10 MHz 60 dB typ
→ Video Impedance Coax, male BNC: 75 ohms
→ Video Impedance UTP, RJ45 Data Connector: 100 ohms
→ Camera Input voltage: 13 to 30 VAC/DC
→ Camera Input current: Class II SELV floating power supply
→ Camera Output voltage: 12VDC, regulated
→ Camera Output current: 400 m
→ Network Wiring: One Unshielded Twisted Pair 24-22 AWG (0,5-0,64mm)
→ Wire Category Type: 2 or better
→ Wire Impedance: 100 ± 20 ohms
→ Wire DC Loop Resistance: 52 ohms per 1,000ft (18 ohms per 100m)
→ Wire Differential Capacitance: 19 pF/ft max (62 pF/m max)
→ Body height: 2.25in (57mm)
→ Body width: 1.52in (39mm)
→ Body depth (not including connectors): .81in (20mm)
→ Product Weight: 1.8oz (50g)
→ Packaged Weight: 0.16lb (73g)
→ Temperature: -4 to +167 °F (-20 to +75 °C)
→ Humidity (non-condensing): 0 to 95%
→ Transient Immunity: per ANSI / IEEE 587 C62.41
→ Extended distance camera power and video routed through UTP and RJ45
→ Supports 12VDC cameras with onboard regulated power
→ Use with NVT's PVD TM Power Supply Hubs and Cable Integrators
→ Up to 3,000ft (1km) with a NVT DigitalEQ TM Hub or active receiver, (see Power Distance Chart)
→ Up to 1,500ft (460m) with a NVT StubEQ TM Hub
→ Frequency response DC to 10MHz (see Recommended Distance Chart)
→ Exceptional interference rejection
→ Built-in transient protection
→ Limited lifetime warranty