NVT NV-32PS420-PVD 32-Channel Power Supply StubEQ Active Receiver Hub
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ Video Attenuation: 0.5 dB typ
→ Video Common-mode / Differential-mode rejection: 15 KHz to 5 MHz 60 dB typ
→ Video Impedance Coax, female BNC: 75 ohms
→ Video Impedance UTP, RJ45: 100 ohms
→ Network Wiring: One four-pair Category cable
→ Camera Power: Each camera is powered by a fully isolated (floating) 28 VAC Class 2 SELV output at up to 0.5 Amps. Each output is individually thermistor protected for auto-reset
→ Power inlet: IEC with molded power cord (included)
→ Voltage: 115 / 230V
→ Current: 5.0 / 2.5 Amps
→ Protection: 5x20mm type T fuse 5 Amp 250V
→ Wattage: 500 Watts
→ Heat: (NV-32PS42-PVD only): 325 BTU / Hour (NV-32PS42-PVD with cameras); 2,000 BTU / Hour
→ Ambient Temperature: -4 to +122 °F (-20 to +50 °C)
→ Minimum airflow: 4ft3/min (0,1m3/ min)
→ Humidity (non-condensing): 0 to 95%
→ Transient Immunity: per ANSI / 587 C62.41
→ Dimensions, including connectors: 19in wide, 1.73in high, 12in deep; 43cm wide, 4,5cm high, 30cm deep
→ Product Weight: 24.1lb (10,93kg)
→ Packaged Weight: 40lb (18,14kg)
→ Mounting Included: Rack mount "L" brackets for front, rear, or wall installations; rubber feet for desk applications
→ Cables Included: Thirty-two 2ft (60cm) coax jumpers. Molded IEC power inlet cord 7ft (200cm)
→ Mounting Optional: NV-RMBK2 Rear Mount Support Kit (designed for use with thinner metal equipment racks) NV-WMBK2 Wall Mount Bracket Kit (heavy duty)
→ Provides Class 2 SELV 28 VAC with up to 0.5 Amp/channel while receiving video transmission and delivering P/T/Z telemetry, all over a single 4-pair Cat5cable for each camera
→ Features 32-Channels with one video output per channel
→ Full motion CCTV video at distances up to 1,500ft (460m) when used with any passive NVT transceiver
→ Adaptive StubEQ™ fully automatic 2-band equalization provides adjustment free equalization everytime, no manual adjustments required
→ Frequency Response DC to 10 MHz
→ Automatic-reset fault protection; transient protection
→ Individually floating power outputs and differential video inputs ensure total ground-loop immunity
→ Diagnostic LEDs show load/no load, miswires, overload conditions, and video status
→ Limited lifetime warranty
The NVT 32-Channel Power Supply StubEQ Active Receiver Hub NV 32PS42 PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room, Power Supply StubEQ™ Active Receiver Hubs have individual floating 28VAC outputs that support at-distance camera loads up to 0.5 Amp per channel for cable runs up to 1,500ft (460m). The NV32PS42PVD built-in StubEQ™ video receiver hub ensures a zero loss video signal for connection into a DVR or IP encoder. Standard features include: automatic-reset fault protection, transient protection, ground loop free individually floating outputs and per-channel diagnostics. All NVT products are UL and cUL listed, are compliant with CE, RoHS, WEEE, and come with NVT's lifetime warranty.
Similar Models:
NV-8PS42-PVD: 8-Channel Power Supply StubEQ Active Receiver Hub
NV-16PS42-PVD: 16-Channel Power Supply StubEQ Active Receiver Hub
