AVSupply

4575 Ruffner St., San Diego, CA 92111 | P: 858.565.1101 | T: 800.284.2288 | F: 858.565.7845 | E: sales@avsupply.com

#1 ELECTRONICS DISTRIBUTOR IN WHOLESALE | GOVERNMENT/GSA | EDUCATION | INTERNATIONAL

NVT NV-418A Dual Passive Video & Audio Transceiver

NVT NV-418A Dual Passive Video & Audio Transceiver

Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.


Price Documents
Video Attenuation: DC to 5 MHz 0.5 dB typ
Video Common-mode rejection: 15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, RCA jack: 75 ohms
Video Impedance UTP, RJ45 jack: 100 ohms
Audio Attenuation: 20 Hz to 20 KHz 1.5 dB typ
Audio Impedance: 600 ohms
Signal: Line level +4 dBm max
Network Wiring: Two Unshielded Twisted Pairs 24-16 AWG (0,5-1,31mm)
Category type: 2 or better
Impedance: 100 ± 20 ohms
DC loop resistance: 52 ohms per 1,000ft (18 ohms per 100m)
Differential capacitance: 19 pF/ft max (62 pF/m max)
Wire length: 750ft (225m)
Connector Interfaces Video, Audio: Female RCA jacks
Connector Interfaces Twisted pair interface: RJ45 non-keyed jack wired for 4 twisted-pairs
Power: No external power require
Ambient temperature: -20 to +75 °C
Humidity (non-condensing): 0 to 95%
Transient Immunity: per ANSI / IEEE 587 C62.41
Dimensions: 3.75 x 2.50 x 0.40in (95,2 x 63,5 x 10,1mm)
Weight: 4.0oz (113g)
Material: Black ABS
Mounting: Two 3M Dual Lock adhesive strips
Full-motion monochrome or color video and audio at distances up to = 750ft (225m) when used with another passive transceiver; 3,000ft (1km) when used with an active receiver such as the NV-518A
No power required
Built-in transient protection
Exceptional interference rejection
Supports "up-the-coax" type control signals
Frequency Response DC to 10 MHz
RJ45 and RCA jack connections
Limited lifetime warranty

The NVT Dual Passive Video/Audio Transceiver NV 418A Dual Video/Audio Transceiver is a passive (non-amplified) device that allows transmission of real-time monochrome or color video and audio over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported. Applications include Security/Surveillance, Video Distribution, Video Conferencing, or Distance Learning.

The unparalleled interference rejection and low emissions of the Model NV418A allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. "Up-the-coax" type signal may be sent over the same wire pair. The NV-418A comes with an RJ45 patch-cord. For rack-mounting, use the NV-418AR with the NV-RM15 rack system.