NVT NV-418AR Rack Mount Dual Passive Video/Audio Transceiver

→ Video Attenuation: DC to 5 MHz 0.5 dB typ
→ Video Common-mode / Differential-mode rejection: 15 KHz to 5 MHz 60 dB typ
→ Video Impedance Coax, RCA jack: 75 ohms
→ Video Impedance UTP, RJ45 jack: 100 ohms
→ Audio Attenuation: 20 Hz to 20 KHz 1.5 dB typ
→ Audio Impedance: 600 ohms
→ Audio Signal: Line level +4 dBm max
→ Power LED: Amber
→ Active LED: Green When path "a" signal received
→ Network Wiring: Four Unshielded Twisted Pairs 24-16 AWG (0,5-1,31mm)
→ Wire Category type: 2 or better
→ Wire Impedance: 100 ± 20 ohms
→ Wire DC loop resistance: 52 ohms per 1,000ft(18 ohms per 100m)
→ Wire Differential capacitance: 19 pF/ft max (62 pF/m max)
→ Wire length: path "a" 3,000ft (1km) path "d" 750ft (225m) When connected to a passive transceiver
→ Connector Interfaces Video: Female BNC jacks
→ Connector Interfaces Audio: 1/4in (6mm) phone jack Tip= "+" Ring= "-" Sleeve= no connection
→ Power: No power required
→ Ambient temperature: -20 to +75 °C
→ Humidity (non-condensing): 0 to 95%
→ Transient Immunity: per ANSI / IEEE 587 C62.41
→ Dimensions, excluding connectors: 5.75 x 3.60 x 1.15in (146 x 91,4 x 29,2mm)
→ Weight: Transceiver alone 9oz (250g); With transformer and patch cord 16oz (450g)
→ Material: Gray ABS
→ Mounting: Two 3M Dual Lock adhesive strips
→ Dual Full-motion monochrome or color video and audio at distances up to: 750ft (225m) when used with another NV-418A or NV-418AR; 3,000ft (1km) when used with an active receiver such as the NV-518A or NV-518AR
→ No power required
→ Built-in transient protection
→ Exceptional interference rejection
→ Supports "up-the-coax" type control signals
→ Frequency Response DC to 10 MHz
→ RJ45, BNC and 1/4" TRS
→ Limited lifetime warranty

**Video signals traveling in opposite directions in the same wire bundle are limited to: 1,000ft (300m) over Category 2 or 3 2,000ft (600m) over category 5 or better wire