NVT NV-872 8-Channel Digital EQ Active Receiver DA Hub

→ Video Frequency response: DC to 10 MHz
→ Video Equalization: 0.5 dB typ
→ Video Automatic: (no adjustment) 0 to 3000ft (0 to 1km) for NTSC or PAL standards Automatic polarity detection and control Impedance
→ Video Common-mode / Differential-mode rejection: 15 KHz to 5 MHz 60 dB typ
→ Video Impedance Coax, female BNC: 75 ohms
→ Video Impedance UTP, Screw terminal block or RJ45: 100 ohms
→ Wire Unshielded Twisted Pair: 0 to 3,000ft 24-16 AWG (0,5-1,31mm)
→ Wire Category Type: 2 or better
→ Wire Impedance: 100 ± 20 ohms
→ Wire DC Loop Resistance: 52 ohms per 1,000ft (18 ohms per 100m)
→ Wire Differential Capacitance: 19 pF/ft max (62 pF/m max)
→ Wire Shielded Twisted Pair: 0 to 1,000ft (0 to 300m) 24-16 AWG (0,5-1,31mm)
→ Wire Impedance: 100 ± 20 ohms
→ Wire DC Loop Resistance: 52 ohms per 1,000ft (18 ohms per 100m)
→ Wire Differential Capacitance: 35 pF/ft max (115 pF/m max)
→ LEDs Power On: Blue LED
→ LEDs Per-channel status: Off = no signal detected
→ LEDs Per-channel status: Green = valid video signal
→ LEDs Per-channel status: Amber = marginal signal detected
→ LEDs Per-channel status: Red = faulty signal detected
→ IEC380 power inlet: 115 / 230V 50 / 60 Hz 160 mA 37 Watts 125 BTU / hour
→ Power inlet: IEC with molded power cord (included)
→ Protection: 5x20mm type T fuse 160mA 250V
→ Ambient temperature: +32 to +122°F (0 to +50 °C)
→ Minimum airflow: 4 ft3/min (0.1m3/min)
→ Humidity (non-condensing): 0 to 95%
→ Transient Immunity: per ANSI / IEEE 587 C62.41
→ Dimensions, excluding brackets and connectors: 17in wide, 1.7in high, 8.125in deep; 43cm wide, 4,5cm high, 20cm deep
→ Packaged weight: 4.8lbs (2,2kg)
→ Mounting Included: Rack mount "L" brackets for front, rear, or wall installations; rubber feet for desk applications
→ Cables Included: Eight 2ft (60cm) coax jumpers Molded IEC power inlet cord 7ft (200cm)
→ NV-RJ45A Included: Two NV-RJ45A RJ45-to-screw-terminal
→ Adaptive DigitalEQ fully automatic 4-band equalization continuously provides adjustment-free equalization
→ Compact rack-mountable 19" 1U high enclosure features 8 channels with 4 outputs per channel
→ Full motion CCTV video at distances up to 3,000ft (1km) when used with any passive NVT transceiver or hub; 1 mile (1,6km) when used with the NV-653T active transmitter; 1,000ft (300m) with shielded twisted-pair when used with any passive NVT transceiver or hub
→ RJ45 connectivity with optional NV-RJ45A RJ45-to-screw-terminal adaptors (included)
→ Exceptional interference rejection
→ Built-in transient protection and ground-lifting
→ Frequency Response DC to 10 MHz
→ Automatic compensation for reverse-polarity wiring
→ At-a-glance per-channel diagnostics
→ Compatible with qualified UTP cameras
→ Includes eight 2ft (60cm) coax jumper cables, rack mount hardware and two NV-RJ45A adaptors