Nitek CAMTRV24 Camera Video, Data And Power Surge Protector
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ Size: 1.7"H x 4.3"W x 2.5"D
→ Power Requirements: None required
→ Connection Method: Video - BNC & Screw Terminals, Power - Screw terminals, Control - Screw terminals
→ Clamping Voltage: Video - 2.8V, Power - 33Vrms, Control - 4.7V
→ Video Insertion Loss: <0.2dB
→ Impedance: 50 or 75 ohms
→ Temperature: -40C to 85C
→ Frequency: DC to 10 MHz
→ Shipping Weight: 1 lb
→ Built-in Nitek video balun
→ Unique multi-stage design
→ Insertion loss < 0.2 dB
→ 2.8V clamping voltage
→ Multi-function - protects video, data & camera power inputs
→ Heavy single point ground
→ Easy to install
→ Lifetime warranty
The Nitek Camera Video, Data and Power Surge Protector
CAMT RV24 is a single channel video balun transceiver used for UTP video transmission combined with a multi-function surge protector for in-line video, 2 wire P/T/Z control and the camera supply voltage. The CAMTRV24 provides multi-stage surge protection to a single camera system and P/T/Z unit for each of these functions. The video balun transceiver is a video transmission device that provides a low cost means of sending live video over unshielded twisted pair, point-to-point wiring for distances of up to 750 feet (225 meters).
A basic system uses two CAMT-RV24 units, one at each end of a twisted pair of wires. These units are intended for use over existing in-house telephone wiring, or category cabling or other twisted pair cable runs to provide a convenient, cost-effective alternative to coax. The CAMTRV24's are designed to provide superior immunity from noise and interference even when running next to line power! The unit can be used at the camera or head-end. The CAMTRV24 is ideally suited for outdoor cameras, where extreme protection on all signal connections is required. The unit is equipped with a BNC connector and screw terminals for the video connections and screw terminals at the inputs and outputs for connection to the P/T/Z data and 12/24 VAC/DC voltage connections. The CAMTRV24 provides a heavy, single-point ground connection and is easily installed in minutes.
Similar Models:
CAMPTR1: Camera Surge Protector - Single Channel, Multi-Stage.
CAMPVC24: Coax Camera, RS422, 24VAC Surge Protector - Single Channel, Multi-Stage.
CAMPDD24: Camera, 4 Wire Contr, 24 VAC Surge Protector - 1 Chan, Multi-Stage.
DVRPTR16: DVR Surge Protector - 16 Channel, Multi-Stage - BNC in to BNC out.
