Nitek EL1500C TCP/IP Transmission Over Coax W/POE - Up To 1,640 Feet (Transmitter & Receiver)
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ Size: 1.1"H x 1.6"W x 4.93"D
→ Power Requirements: PoE or PS48 Power Supply (48vdc @ 15.4watts)
→ Ethernet Connection: [1] Auto Configuring 10 / 100 RJ45 port
→ EtherStretch Link Connection: [1] Coaxial BNC Connector
→ LED Indicators: - Link Status, Power, PoE Out, 10Mb or 100mb
→ Shipping Weight: 3 lbs.
→ Mounting: Two 3/8 mounting slots
→ Operating Temperature: 0 - 140 F Fahrenheit
→ Humidity: Up to 85% non-condensing
→ Transmits up to distances of 500 meters / 1,640 feet
→ Supports PoE and network communications
→ Supports any network device, including IP cameras
→ Fully transparent to the network
→ Built-in surge protection
→ Easy to install, no set up required
→ No MAC or IP addressing required
→ LED indicators for network signals, link status and power
→ Optional power supply can insert POE power for non-POE switches
The Nitek IP & PoE Over Coax Extender EL 1500C IP video over Coax network extender-PoE Inserter (EtherStretch) system includes both the transmitter and receiver units. The System transmits IP cameras over coax and can quickly turn any ordinary RG59U coaxial cable into a high speed network communication & PoE path. When operating over RG59U coaxial cable, the coax network extender system can operate for distances of up to 500 meters (1,640 feet).
The EL-1500C coax ethernet extender system consists of a transmitter and a receiver set, which requires very little installation time & absolutely no set up or configuration.
The EL 1500 C ethernet over cax network extender transmitter and receiver are transparent to the network and have no IP or MAC addressing. Simply connect your network devices to the network ports of the transmitter and receiver along with existing cabling and the system begins communicating. LED indicators show the status of network communication and PoE power.
When connected to a PoE switch, power from the switch is used as the power source for the connected
EL-1500-C receiver. In applications where network switches are not PoE capable, an optional power source (PS48 sold separately) can be used to insert power to the
EL1500 C receiver. The power is sent from the receiver over the coax to the transmitter. The transmitter use PoE as its power source and powers the connected PoE network device as well.
The EL1500C coax network extender system extends network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow.
Similar Models:
EL1500CW: IP & PoE Over Coax Extender w/Weatherproof Transmitter.
EL1500U: TCP/IP Transmission over UTP w/POE - up to 1,960 feet (Transmitter & Receiver).
EL1500UW: Outdoor Rated Ethernet & PoE Extender.
