Nitek EX1120 Active Video Balun Set For Transmission Of CCTV Over Unshielded Twisted Pair (UTP) Transmission From 1,000 Feet (300 Meters) To 12,000 Feet (3,600 Meters).

→ Unit: Transmitter
→ Size: 1.8" H x 4.3" W x 2.4" D
→ Power Requirements: 24 VAC @ 2 watts (2VA)
→ Input: 1 Vpp composite video Monochrome or Color
→ Output: Balanced low voltage current loop
→ Unit: Receiver
→ Size: 1.8" H x 4.3" W x 2.4" D
→ Power Requirements: 24 VAC @ 2 watts (2VA)
→ Input: Balanced low voltage current loop
→ Output: 1 Vpp composite video Monochrome or Color
→ Common Mode Rejection: 70dB
→ Unit: System
→ Video Format: PAL, SECAM, NTSC, RS170, CCIR (Color or B/W)
→ Operating Frequency :1 Hz to 10 MHz
→ Wire Size: 26 to 18 AWG Unshielded Twisted Pair (UTP)
→ Wire DC Loop Resistance: 51 Ohms/1,000 feet (max)
→ Wire Nominal Capacitance: 17pF/ft
→ Wire Impedance: 100 Ohms /- 20%
→ Wire UTP Category: 2 or better
→ Temperature Range: -40°C to 65°C
→ Humidity Range: 0 to 98%, non-condensing
→ Enclosure Material: Black, ABC flame retardant plastic
→ Shipping Weight: 3 lbs (both units)
→ Active electronics compensate for frequency and level loss providing the highest quality video
→ High resolution color or monochrome video
→ Immunity to ground loop. Video and AC can be run in a common raceway, where code allows
→ Built-in protection from power surges, transients static or other electrical interference
→ Video can be run in the same cable with telephone and computer signals
→ Weather resistant design
→ Easy to install
→ Large Campus Installations
→ Shopping Malls
→ Airports
→ High Voltage Facilities
→ Traffic Around City Areas
→ Remote Gates