Nitek TR560 Active Video Balun Receiver For UTP Transmission From 100 To 6,000 Feet (30 To 1,800 Meters)

→ Receiver Unit: Receiver only
→ Size: 1.6" H x 4.3" W x 2.4" D
→ Power Requirements: 12 to 24 VAC or VDC, 45mA
→ Operating Distance w/Passive Transmitter: 100 to 3,000 feet
→ Operating Distance w/Active Transmitter Analog Video: 500 to 7,200 feet
→ Operating Distance w/Active Transmitter with DVR: 500 to 9,000 feet
→ Input: Balanced low voltage current loop
→ Output: 1 Vpp composite video Monochrome or Color
→ Common Mode Rejection: >70dB
→ Video Format: PAL, SECAM, NTSC, RS170, CCIR (Color or B/W)
→ Operating Frequency: DC to 10 MHz
→ Wire Size: 26 to 18 AWG unshielded twisted pair
→ Wire DC Loop Resistance: 51 Ohms/1,000 ft (max)
→ Wire Nominal Capacitance: 17pF/ft
→ Wire Impedance: 100 Ohms /- 20%
→ Category Wire: 2 or better
→ Temperature Range: -20°C to 65°C
→ Humidity Range: 0 to 98%, non-condensing
→ Enclosure Material: Black, ABC flame retardant plastic
→ Twisted Pair Connection: Screw terminals
→ Shipping Weight: 2 lbs
→ Active electronics compensate for frequency and level loss
→ Built-in protection from power surges, transients, static or other electrical interference
→ High resolution color or monochrome video
→ Complete immunity to ground loop; video and AC can be run in a common raceway, where allowed
→ Video can be run in the same cable with telephone and computer signals
→ Weatherproof design
→ Easy to install
→ Elevators - making traveling coax unnecessary
→ High Rise Buildings - between floors, through punchdown blocks
→ Detention Facilities - using existing communication wiring
→ High Voltage Facilities - high immunity to AC power interference
→ Parking Garages - where running coax is difficult to impossible
→ Remote Gates - can be run in same cable with audio and gate control