Nitek VH3200-110 32 Port Active Video Hub With 110 Punchdown Block Inputs

→ Unit: Transceiver
→ Size: 1 RU x 6.0" (D)
→ Power Requirements: 24 VAC @ 450mA (Wall transformer provided with unit)
→ Video Input: Balanced low voltage current loop
→ Video Output: 1 Vpp composite video monochrome or color
→ Common Mode Rejection: >70dB
→ Video Format: RS170, NTSC, PAL, SECAM, CCIR (Color or B/W)
→ Twisted Pair Connection: Screw terminals providing balanced low voltage current loop
→ Operating Frequency: DC to 10 MHz
→ Temperature Range: -20 degrees C to 55 degrees C
→ Humidity Range: 0 to 98% non-condensing
→ Enclosure Type: Standard 19" rack 1 RU in height
→ Wire Spec: 26 to 12 AWG Unshielded Twisted Pair (UTP)
→ DC Loop Resistance: 51 Ohms/1,000 feet (max) (51 Ohms/300 meters)
→ Normal Capacitance: 17pF/ft.
→ Impedance: 100 Ohms /- 20%
→ UTP Category: 2 or better
→ Quality video over ordinary twisted pair cable
→ Immunity to noise and interference
→ Built-in surge suppression on VB39 models
→ Passive devices - do not require power
→ Video & P/T/Z over a single pair (with up-the-coax systems)
→ M - version mounts directly to camera or video source
→ Weatherproof design
→ Easier to install than coax