Nitek VR448COAX High Speed Ethernet Extender W/ Integrated 4 Port PoE Switch
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ Network Connection: (4) RJ45 Connector
→ Coaxial Connection: BNC Connector
→ Power: 48 Volt Class 2 Power Supply
→ Network Rate: 10/100 Ethernet
→ Transmits high speed Ethernet over legacy coaxial cable
→ Transmits distances up to 2500 feet (750 meters)
→ Integrated 4 port PoE unmanaged network switch
→ Provides PoE on demand for up to four devices
→ Supports mega-pixel cameras
→ Supports muli-camera installations
→ Fully transparent to the network
→ Supports any network device, including IP cameras
→ Dual stage surge protection
→ Easy to install, no set up required
→ No MAC or IP addressing required
→ LED indicators for network signals, link status and power
→ Rack-mount kit available head-end
The Nitek 4 Port PoE Switch with Network Extender
VR448COAX is an IP Camera Extender over Coaxial Cable integrates a 4 port PoE network switch with our already popular Ethernet extenders. The VR448COAX ethernet extender allows IP Ethernet transmission of IP Cameras and other network devices for communication over an existing coaxial cable for distances up to 2,500 feet (750 meters).
The VR448COAX IP Network Extender consists of a transmitter and receiver set which requires very little installation time and absolutely no set up or configuration. Installation requires simply connecting the BNC connectors at each end of the existing coaxial cable to the transmitter and receiver of the VR448COAX. Once powered up the network switch transmitter will begin producing PoE for its connected devices that require power. The receiver instantly connects to the transmitter and begins operating as a full-duplex 100BaseT Ethernet conduit. The VR448COAX Ethernet Extender is completely transparent to the network; it has no IP or MAC addresses and does not require any additional setup or programming. Connect your network devices by plugging their RJ45 connectors into the network ports of the transmitter and receiver. LEDs on the devices indicate the presence of power, transmission link and network signals for easy troubleshooting.
The VR448COAX extends network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow. The VR448COAX will auto-negotiate bandwidth to compensate for wire attenuation and losses that occur from wire length, signal noise and interference. (Please refer to cable distance and bandwidth charts for further review).
The units are constructed of industrial grade RoHS compliant plated steel which is finished with a heat resistant powder coat paint making them very durable. They are designed to mount within the camera housing, in an equipment enclosure or simply wall mount the unit using the included mounting kit. For installation of several units the RK124 rack mount kit allows for centralized power of the receiver units while maintaining an orderly installation.
Similar Models:
VR124COAX: TCP/IP Transmission over Coax - up to 2,500 feet
VR124UTP: TCP/IP Transmission over UTP - up to 1 Mile
VR148COAX: TCP/IP Transmission over Coax w/POE Power Supply - up to 2,500 feet
VR148UTP: TCP/IP Transmission over UTP w/POE Power Supply - up to 1 Mile
VR448UTP: TCP/IP 4 Port PoE Switch - Transmission over UTP - up to 1 Mile
