AVSupply

4575 Ruffner St., San Diego, CA 92111 | P: 858.565.1101 | T: 800.284.2288 | F: 858.565.7845 | E: sales@avsupply.com

#1 ELECTRONICS DISTRIBUTOR IN WHOLESALE | GOVERNMENT/GSA | EDUCATION | INTERNATIONAL

Pelco CCC1390 Series Day/Night, WDR, CCD Compact Camera

Pelco CCC1390 Series Day/Night, WDR, CCD Compact Camera

Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.


Price Documents
Day/Night Operation:
Day: Infrared (IR) cut filter
Night: BK-7 glass, same optical displacement as day
Imaging Device: 1/3-inch image format Sony SS-2WD CCD
Dynamic Range: 60 dB maximum (WDR mode)
Picture Elements:
NTSC: 768 (H) x 494 (V) (approx. 380K)
PAL: 752 (H) x 582 (V) (approx. 440K)
Sensing Area: 6 mm diagonal
Scanning System: 525 (NTSC)/625 (PAL), 2:1 interlace
Synchronization: AC line lock/internal
Horizontal Resolution: 530 TV lines (B-W); 480 TV lines (color)
Electronic Shutter Range:
NTSC: 1/60-1/50,000 second
PAL: 1/50-1/50,000 second
Auto Iris Lens Type: DC-drive (autosensing)
Minimum Illumination:
B-W (SENS 40x): 0.002 lux, F1.2, 40 IRE, AGC on, 75% scene reflectance
Color (SENS 40x): 0.02 lux, F1.2, 40 IRE, AGC on, 75% scene reflectance
B-W: 0.08 lux, F1.2, 40 IRE, AGC on, 75% scene reflectance
Color: 0.8 lux, F1.2, 40 IRE, AGC on, 75% scene reflectance
Filter Switching Threshold:
Day to Night: 1.6 lux, average scene illumination
Night to Day: 1.9 lux, average scene illumination
Digital Slow Shutter (SENS): Selectable: on/off; 2x, 4x, 6x, 8x, 10x, 20x, 40x
Electronic PTZ: Selectable: 1.5x, 2.0x, 2.5x
Signal-to-Noise Ratio: >50 dB
Vertical Phase: Adjustable ±90°
Automatic Gain Control: Selectable: on/off
Backlight Compensation: Selectable: on/off
Flickerless Mode: Selectable: on/off; 1/100 sec (NTSC), 1/120 sec (PAL)
Auto White Balance: Selectable: on/off, 4 modes
Day/Night: Selectable: on/off, 4 modes
Signal Processing: Digital signal processing (DSP)
Video Output: 1 Vp-p, 75 ohms
Gamma Correction: Selectable: on/off, 0.45, 0.6, 1.0
White Balance Range: 2,500° to 8,600°K
Power Requirements:
CCC1390H-6: 24 VAC ±15%/12 VDC ±15%, 60 Hz
CCC1390H-6X: 24 VAC ±15%/12 VDC ±15%, 50 Hz
Power Consumption: 3.5 W
Power Connector: 3-pin terminal strip, push-in type
Video Connector: BNC
Auto Iris Connector: 4-pin connector (miniature square)
Mode Indicators: 4 LED
Controls: 5-position button; Serial data termination switch
Control Connector: 7-pin micro (1.25 mm) connector; Data I/O (Pelco P or Pelco D protocol); External day/night filter control
Lens Mount: CS mount
Camera Mount: 1/4-inch UNC-20 screw, top or bottom of camera housing
Operating Temperature: 14° to 122°F (–10° to 50°C)
Storage Temperature: –4° to 140°F (–20° to 60°C)
Operating Humidity: 20% to 80% (noncondensing)
Storage Humidity: 20% to 90% (noncondensing)
Dimensions: 2.69" D x 2.09" W x 2.19" H (6.83 x 5.31 x 5.56 cm)
Weight (without lens): 0.44 lb (0.20 kg)
Shipping Weight: 1 lb (0.45 kg)

The Pelco CCC1390 Series camera is a compact, wide dynamic range (WDR), day/night camera. Its WDR technology provides up to 60 dB of dynamic range and produces superior images over a wide range of lighting conditions, including extreme backlight conditions. The camera also uses a removable infrared (IR) cut filter to switch between color and black-white (B-W) modes as environmental lighting conditions change.

It also provides a dual resolution of 530 TVL (B-W) and 480 TVL (color). On-screen programmable menus can be accessed locally using the rear panel button or remotely using any Pelco controller with Pelco P or Pelco D protocol. Use these menus to select a specific profile or to customize and save camera settings for the specific application.

The CCC-1390 camera has a standard CS-mount and can be used with fixed, manual, or DC-drive auto iris lenses. The auto iris is controlled through a standard four-pin square connector that is included with all Pelco auto iris lenses. The CCC 1390 camera is quick and easy to install and its compact size makes it ideal for Pelco's DomePak® and ImagePak® fixed camera dome/enclosure packages.