Pelco CM6700-MXB4-X Switcher/controller. 16 Inputs, 4 Outputs, PAL, 230 V, 50/60 Hz

→ Memory Protection: Replaceable lithium battery provides data protection for ten years
→ Keyboard Capacity: 8
→ Receiver/Dome Control: Coaxitron® and RS-422
→ Alarm Inputs: 18, configurable (includes presets and N.O./N.C. device)
→ Alarm Relay Outputs: 1, DPST
→ Rating: 0.5 A at 125 VAC
→ General Purpose Outputs: 2, open collector; 32 VDC max., 25 mA max.
→ Data Ports: 2
→ Receiver: RS-422, Pelco D protocol 2400 baud, Pelco P protocol 2400 to 9600 baud
→ Data (Computer): RS-232/RS-422/RS-485, 1200 to 19.2K baud
→ Keyboard Ports: 2
→ Local Port: Provides data and 12 VAC power for one keyboard
→ Remote Port: Data only port for all additional or remote keyboards; each keyboard connected to this port requires a KBDKIT
→ Dimensions (switcher only): 10.5" D x 17.0" W x 3.5" H (26.67 x 43.18 x 8.89 x cm)
→ Mounting (switcher only): Factory configured for EIA rack mount (2 RUs); rack ears can be removed for wall mount or freestanding applications
→ Weight:
→ Unit; Shipping
→ 10.22 lb (4.62 kg); 14 lb (6.34 kg)
→ Power Source: 120 V or 230 V, 50/60 Hz
→ Power Consumption: 10 W
→ Video Inputs: 16 inputs, BNC, terminating or looping (jumper selectable); 0.5 to 2.0 Vp-p composite video
→ Video Outputs: 2 or 4 outputs, BNC
→ Switching Type: Cross-point video matrix, RS-170, NTSC, CCIR and PAL compatible
→ Switching Method: Vertical interval switching
→ Switching Time: Less than 16 milliseconds (typical)
→ Bandwidth: 15 MHz
→ Frequency Response: Flat to 8 MHz, ±1dB to 15 MHz
→ Signal-to-Noise Ratio: –60 dB (peak-to-peak vs. RMS noise)
→ Adjacent Channel Crosstalk: –49.6 dB at 3.58 MHz
→ Differential Gain: 1.03%
→ Differential Phase: 1.02°
→ Line Tilt: 0.6%
→ Field Tilt: 1.2%
→ Gain: Unity (±1dB)
→ DC Output: Zero volts
→ Video Cable Distances:
→ Minimum cable requirements: 75-ohms impedance; All-copper center conductor; All-copper braided shield with 95% braid coverage
→ Character Type: White with black outline
→ Camera Identification: 1 line, 20-characters plus camera number
→ Date/Time: 1 line
→ Configurable: On-screen, menu driven
→ Character Set: 80 ASCII characters
→ Keyboard:
→ Input Voltage: 12 VAC or ±12 VDC
→ Power Consumption: 5 W
→ Connector Type: RJ-45, 8-pin modular (female)
→ Communication Type: RS-485*
→ *Maximum cable distance for RS-485 communication over 24-gauge wire is 4,000 feet (1,219 m). Pelco recommends using shielded twisted pairs, such as Belden 9843 or similar cable that meets or exceeds the basic requirements for EIA RS-485 applications.
→ 6700 Mode: (KBD100/200A/300A)
→ Interface: RS-485
→ Protocol: Pelco ASCII
→ Baud Rate: 9600
→ Communication Parameters: 8 data bits, odd parity, 1 stop bit
→ Direct Mode: (KBD200A/KBD300A)
→ Interface: RS-422
→ Protocol: Pelco P
→ Baud Rate: 4800
→ Communication Parameters: 8 data bits, no parity, 1 stop bit
→ ASCII Mode: (KBD200A)
→ Interface: RS-422
→ Protocol: Pelco P
→ Baud Rate: 9600
→ Communication Parameters: 8 data bits, odd parity, 1 stop bit
→ Keyboard: Keypad Electromechanical
→ Joystick (KBD300A): 3-axis, vector solving, twisting, return-to center head
→ Display:
→ KBD100: 7-segment digital display: Red LED, 1 cell
→ KBD200A/KBD300A: 7-segment digital display: Red LED, 2 cells; Multiplexer mode indicator: Green LED
→ Ambient Operating:
→ Temperature: 20° to 120°F (–7° to 49°C)
→ Humidity: 10% to 90%, noncondensing
→ Dimensions:
→ KBD100: 7.125" L x 6.00" W x 2.25" H (18.10 x 15.24 x 5.72 cm)
→ KBD200A: 7.125" L x 8.125" W x 2.25" H (18.10 x 20.64 x 5.72 cm)
→ KDB300A: 7.125" L x 9.50" W x 2.25" H (24.13 x 18.10 x 5.72 cm)
→ Weight
→ Unit; Shipping
→ KBD100: 1.9 lb (0.86 kg); 3 lb (1.35 kg)
→ KBD200A: 2.1 lb (0.97 kg); 3 lb (1.35 kg)
→ KBD300A: 2.5 lb (1.12 kg); 5 lb (2.26 kg)