Pelco ES30 Esprit ES30 Series Positioning System With Thermal Imaging Optics
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ Integral Multiprotocol (Coaxitron®, RS-422 Pelco D and Pelco P Protocols)Receiver/Driver
→ Digital Position and Zoom Control and Feedback Using Pelco D Protocol
→ Integral Camera Enclosure
→ Operational in 90 mph Winds, Can Withstand Wind Velocity up to 130 mph
→ Pan Preset Speed of 100°/Sec in 50 mph Winds and 50°/Sec in 90 mph Winds
→ Variable Scan Speeds (1 to 40°/Sec)
→ Translator Boards for Selected Competitive Protocols
→ Easy to Install: Quick and simple electrical connections
→ 24 VAC or 120/230 VAC Selectable
→ Full Continuous-Duty Warranty
→ 850 nm and 950 nm Active IR Illumination Focus Algorithms (24X and 35X models only)
→ 64 Configurable Presets with Labels
→ Auto, Frame, and Random Scan
→ Configurable Power-up Mode
→ Configurable Park
→ Configurable Manual Limit Stops (Pan)
→ Configurable Scan Limit Stops (Pan)
→ Patterns
→ Proportional Pan/Tilt
→ 8 Zones (configurable in size) Can Be Labeled with up to 20 Characters Each
→ Up to 8 Zones (configurable in size) Can Be Set to Output Blank Video
→ 10-Inch Integrated Enclosure with Pre-Assembled, IOP Camera
→ Sun Shroud, Heater/Window Defroster, and Insulation All Standard
→ 1 Auxiliary Output
→ Integrated Window Wiper with Configurable Delay and Shut-Off (ES31C Models)
→ Input Voltage: 24, 120, or 230 VAC, 50/60 Hz; switch selectable for 120/230 VAC inputs
→ Input Voltage Range: ±10%
→ Power Consumption: Maximum 70 VA per system
→ Heater and Defroster: Thermostatically controlled
→ Electrical Connections: 2 power source connections made at mount location with wire splices and 1 ground wire splice; 1 BNC receptacle and 4 wire splices at mount location for RS-422 Pelco D and Pelco P protocols; 2 wire splices for open collector auxiliary output
→ Aux 2: Open collector output with 2-second activation; connected relay must require no more than 32 VDC and 40 mA to energize relay coil; wire length between Esprit and relay must be less than 100 ft (30 m)
→ Video Coaxial Cable Max. Wiring Distances:
→ Cable Type*; Maximum Distance:
→ RG59/U; 750 ft (229 m)
→ RG6/U; 1,000 ft (305 m)
→ RG11/U; 1,500 ft (457 m)
→ *Minimum cable requirements: 75-ohms impedance; all-copper center conductor; all copper braided shield with 95% braid coverage
→ Pan Movement: 360° Continuous pan rotation
→ Vertical Tilt: Unobstructed 33° to –83°
→ Variable Pan/Tilt Speed:
→ Pan: 0.5° to 40°/sec variable-speed operation, 100°/sec Turbo
→ Tilt: 0.5° to 20°/sec variable-speed operation
→ Preset Speeds:
→ Pan: 100°/sec
→ Tilt: 30°/sec
→ Camera Mounting: Integrated camera sled assembly
→ Latches: One link-lock, No. 3 stainless-steel latch; can be secured with padlock (not supplied)
→ Construction: Die-cast, extruded and sheet aluminum; stainless steel hardware
→ Finish: Gray polyester powder coat
→ Viewing Window: 0.23" (5.84 mm) thick, optically clear impact/scratch-resistant coated Lexan®
→ Window Viewing Area: 2.25-inch (5.71 cm) diameter
→ Operating Temperature: –50° to 122°F (–45° to 50°C) for sustained system operation or 140°F (60°C) absolute maximum. Within two hours after power-up, the entire unit can de-ice and be operational from a temperature of –13°F (–25°C).
→ Operating Environment: Will remain operational in 90 mph wind conditions; withstands 130 mph
→ Weight:
→ With Pedestal Adapter; With Wall Mount:
→ Unit:
→ Standard with IOP 20 lb (9.0 kg); 22 lb (9.9 kg)
→ With Wiper and IOP 21 lb (9.5 kg); 23 lb (10.4 kg)
→ Shipping:
→ Standard with IOP 25 lb (11.3 kg); 28 lb (12.6 kg)
→ With Wiper and IOP 26 lb (11.7 kg); 29 lb (13.1 kg)
→ CE, Class B
→ FCC, Class B
→ UL/cUL Listed
→ C-Tick
→ Meets NEMA Type 4X and IP66 standards
→ U.S. Patents 340,940 and 5,224,675
Pelco's ES-30 Esprit® Positioning System features a receiver, pan/tilt, enclosure, and Integrated Optics Package (IOP) in a single, easy-to-install system. The IOP contains an autofocus camera and lens module with configurable features. A powder-coated, aluminum construction makes this system ideal for either indoor or outdoor applications. The system has an absolute operating temperature range of –50° to 140°F (–45° to 60°C). Within two hours after power-up, the entire unit can de-ice and be operational from a temperature of –13°F (–25°C).
The ES31C Series includes a window wiper. The wiper is completely integrated into the enclosure and does not interfere with the viewing range of the system. The wiper can be configured to delay between wipes and to automatically shut off after a specified period. The wiper design also allows for easy replacement of the wiper blade. A built-in heater, window defroster/defogger, sun shroud, and insulation blanket are standard features on the units. All units also include an open collector auxiliary output that functions for two seconds before deactivating.
The ES30 Series variable pan and tilt speeds range from 0.1 to 40 degrees per second in manual pan mode and 0.1 to 20 degrees per second in manual tilt. Pan preset and turbo speeds are 100 degrees per second in wind speeds of 50 mph and 50 degrees per second in the 90 mph wind-speed profile. Tilt preset speed is 30 degrees per second.
The ES 30 is capable of 360 degrees of continuous pan rotation. The tilt range allows for horizontal viewing of +33 to –83 degrees. There are 64 configurable preset positions with a preset accuracy of one-quarter degree. The systems are available with an input voltage of 24 VAC or with a selectable power source of 120/230 VAC. The camera also has a power-up recovery mode that allows the user to specify what operation the system will resume whenever the power is cycled.
SIMILAR MODELS:
ES3014TI-2N - Pedestal Mount, 24VAC, 14.25 mm Lens, NTSC
ES3014TI-2N-1 - Pedestal Mount, 24VAC, 14.25 mm Lens, NTSC 9Hz
ES3014TI-2N-X - Pedestal Mount, 24VAC, 14.25 mm Lens, PAL
ES3014TI-2N-X-1 - Pedestal Mount, 24VAC, 14.25 mm Lens, PAL 9Hz
ES3014TI-5N - Ped. Mount, 120/230 VAC, 14.25mm Lens, NTSC
ES3014TI-5N-1 - Ped. Mount, 120/230 VAC, 14.25 mm Lens, NTSC 9Hz
ES3014TI-5N-X - Ped. Mount, 120/230VAC, 14.25 mm Lens, PAL
ES3014TI-5N-X-1 - Ped. Mount, 120/230VAC, 14.25 mm Lens, PAL 9Hz
ES3014TI-2W - Wall Mount, 24VAC, 14.25mm Lens, NTSC
ES3014TI-2W-1 - Wall Mount, 24VAC, 14.25 mm Lens, NTSC 9Hz
ES3014TI-2W-X - Wall Mount, 24VAC, 14.25 mm Lens, PAL
ES3014TI-2W-X-1 - Wall Mount, 24VAC, 14.25 mm Lens, PAL 9Hz
ES3014TI-5W - Wall Mount, 120/230 VAC, 14.25mm Lens, NTSC
ES3014TI-5W-1 - Wall Mount, 120/230 VAC, 14.25 mm Lens, NTSC 9Hz
ES3014TI-5W-X - Wall Mount, 120/230VAC, 14.25 mm Lens, PAL
ES3014TI-5W-X-1 - Wall Mount, 120/230VAC, 14.25 mm Lens, PAL 9Hz
ES3035TI-2N - Pedestal Mount, 24VAC, 35 mm Lens, NTSC
ES3035TI-2N-1 - Pedestal Mount, 24VAC, 35 mm Lens, NTSC 9Hz
ES3035TI-2N-X - Pedestal Mount, 24VAC, 35 mm Lens, PAL
ES3035TI-2N-X-1 - Pedestal Mount, 24VAC, 35 mm Lens, PAL 9Hz
ES3035TI-5N - Ped. Mount, 120/230 VAC, 35 mm Lens, NTSC
ES3035TI-5N-1 - Ped. Mount, 120/230 VAC, 35 mm Lens, NTSC 9Hz
ES3035TI-5N-X - Ped. Mount, 120/230VAC, 35 mm Lens, PAL
ES3035TI-5N-X-1 - Ped. Mount, 120/230VAC, 35 mm Lens, PAL 9Hz
ES3035TI-2W - Wall Mount, 24VAC, 35 mm Lens, NTSC
ES3035TI-2W-1 - Wall Mount, 24VAC, 35 mm Lens, NTSC 9Hz
ES3035TI-2W-X - Wall Mount, 24VAC, 35 mm Lens, PAL
ES3035TI-2W-X-1 - Wall Mount, 24VAC, 35 mm Lens, PAL 9Hz
ES3035TI-5W - Wall Mount, 120/230 VAC, 35mm Lens, NTSC
ES3035TI-5W-1 - Wall Mount, 120/230 VAC, 35 mm Lens, NTSC 9Hz
ES3035TI-5W-X - Wall Mount, 120/230VAC, 35 mm Lens, PAL
ES3035TI-5W-X-1 - Wall Mount, 120/230VAC, 35 mm Lens, PAL 9Hz
ES3050TI-2N - Pedestal Mount, 24VAC, 50 mm Lens, NTSC
ES3050TI-2N-1 - Pedestal Mount, 24VAC, 50 mm Lens, NTSC 9Hz
ES3050TI-2N-X - Pedestal Mount, 24VAC, 50 mm Lens, PAL
ES3050TI-2N-X-1 - Pedestal Mount, 24VAC, 50 mm Lens, PAL 9Hz
ES3050TI-5N - Ped. Mount, 120/230 VAC, 50 mm Lens, NTSC
ES3050TI-5N-1 - Ped. Mount, 120/230 VAC, 50 mm Lens, NTSC 9Hz
ES3050TI-5N-X - Ped. Mount, 120/230VAC, 50 mm Lens, PAL
ES3050TI-5N-X-1 - Ped. Mount, 120/230VAC, 50 mm Lens, PAL 9Hz
ES3050TI-2W - Wall Mount, 24VAC, 50 mm Lens, NTSC
ES3050TI-2W-1 - Wall Mount, 24VAC, 50 mm Lens, NTSC 9Hz
ES3050TI-2W-X - Wall Mount, 24VAC, 50 mm Lens, PAL
ES3050TI-2W-X-1 - Wall Mount, 24VAC, 50 mm Lens, PAL 9Hz
ES3050TI-5W - Wall Mount, 120/230 VAC, 50mm Lens, NTSC
ES3050TI-5W-1 - Wall Mount, 120/230 VAC, 50mm Lens, NTSC 9Hz
ES3050TI-5W-X - Wall Mount, 120/230VAC, 50 mm Lens, PAL
ES3050TI-5W-X-1 - Wall Mount, 120/230VAC, 50 mm Lens, PAL 9Hz
