Pelco ES30PCBW35 35x Day/Night Esprit® System With Pressurized IOC And Optional Wiper

→ Deterrent Surveillance
→ Integral Multiprotocol (Coaxitron®, RS-422 Pelco D and Pelco P Protocols) Receiver/Driver
→ Digital Position and Zoom Control and Feedback Using Pelco D Protocol
→ Integral Camera Enclosure
→ Variable Speed 0.1 to 100°/Sec
→ 360° Continuous Pan Rotation
→ +33° to –83° Tilt Range
→ Operational in 90 mph Winds, Can Withstand Wind Velocity up to 130 mph
→ Pan Preset Speed of 100°/Sec in 50 mph Winds and 50°/Sec in 90 mph Winds
→ Variable Scan Speeds (1 to 40°/Sec)
→ Translator Boards for Selected Competitive Protocols
→ Easy to Install; Quick and Simple Electrical Connections
→ 24 VAC or 120/230 VAC Selectable
→ Designed for Minimal Maintenance, No Gears to Adjust
→ Full Continuous-Duty Warranty
→ 850 nm and 950 nm Active IR Illumination Focus Algorithms (24X and 35X models only)
→ 64 Configurable Presets with Labels
→ Auto, Frame, and Random Scan
→ Configurable Power-up Mode
→ Configurable Park
→ Configurable Manual Limit Stops (Pan)
→ Configurable Scan Limit Stops (Pan)
→ Patterns
→ Proportional Pan/Tilt
→ 8 Zones (configurable in size) Can Be Labeled with up to 20 Characters Each and Set to Output Blank Video
→ 10-Inch Integrated Enclosure with Pre-Assembled, Pressurized IOC
→ Sun Shroud, Heater/Window Defroster, and Insulation All Standard
→ 1 Auxiliary Output
→ Integrated Window Wiper with Configurable Delay and Shut-Off (ES31PC Models)
→ Pressurized to 10 psig, Nominal (Sea Level, 70°F)
→ Internal Sensors for Temperature, Dew Point and Pressure
→ On-Screen Alert for High and Low Temperature, High and Low Pressure, and High Humidity
→ 4 Alert On-Screen Display Modes
→ 4 Acknowledge Modes
→ Pressurized Relief Valve
→ Meets IP67 Standards
→ Input Voltage: 24, 120, or 230 VAC, 50/60 Hz; switch selectable for 120/230 VAC inputs
→ Input Voltage Range: ±10%
→ Power Consumption Maximum: 70 VA per system
→ Heater/Defroster: Digital temperature control
→ Electrical Connections: 2 power source connections made at mount location with wire splices and 1 ground wire splice; 1 BNC receptacle and 4 wire splices at mount location for RS-422 Pelco D and Pelco P protocols; 2 wire splices for open collector auxiliary output
→ Aux 2: Open collector output with 2-second activation; connected relay must require no more than 32 VDC and 40 mA to energize relay coil; wire length between Esprit and relay must be less than 100 ft (30 m)
→ Video Coaxial Cable Max. Wiring Distances:
→ Cable Type*; Maximum Distance:
→ RG59/U; 750 ft (229 m)
→ RG6/U; 1,000 ft (305 m)
→ RG11/U; 1,500 ft (457 m)
→ *Minimum cable requirements: 75-ohms impedance; all-copper center conductor; all copper braided shield with 95% braid coverage
→ Pan Movement: 360° Continuous pan rotation
→ Vertical Tilt: Unobstructed +33° to –83°
→ Variable Pan/Tilt Speed:
→ Pan: 0.1° to 40°/sec variable-speed operation, 100°/sec Turbo
→ Tilt: 0.1° to 20°/sec variable-speed operation
→ Preset Speeds:
→ Pan: 100°/sec
→ Tilt: 30°/sec
→ Camera Mounting: Replaceable pressurized cartridge
→ Latches: 1 link-lock, No. 3 stainless-steel latch; can be secured with padlock (not supplied)
→ Construction: Die-cast, extruded and sheet aluminum; stainless steel hardware
→ Finish: Gray polyester powder coat
→ Viewing Window: 0.23" (5.84 mm) thick, optically clear tempered glass
→ Operating Temperature: –50° to 122°F (–45° to 50°C) for sustained system operation or 140°F (60°C) absolute maximum. Within two hours after power-up, the entire unit can de-ice and be operational from a temperature of –13°F (–25°C).
→ Operating Environment: Will remain operational in 90 mph wind conditions; withstands 130 mph
→ Weight:
→ With Pedestal Adapter; With Wall Mount
→ Unit:
→ Standard with IOC: 21 lb (9.5 kg); 23 lb (10.4 kg)
→ With Wiper and IOC: 22 lb (10 kg); 24 lb (11 kg)
→ Shipping:
→ Standard with IOC: 26 lb (11.7 kg); 29 lb (13.1 kg)
→ With Wiper and IOC: 27 lb (12.3 kg); 30 lb (13.6 kg)
→ CE, Class B
→ FCC, Class B
→ UL/cUL Listed
→ C-Tick
→ U.S. Patent D472,260
→ Meets the following standards:
→ NEMA Type 4X (Pan/Tilt and Enclosure)
→ IP66 (Pan/Tilt and Enclosure)
→ IP67 (Pressurized Integrated Optics Cartridge [IOC])