Pelco IM10 1.3 Megapixel High Definition Integrated Camera
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ Imager Type: CMOS
→ Imager Readout: Progressive scan
→ Maximum Resolution: 1280 x 1024
→ Signal-to-Noise Ratio: 50 dB
→ Auto Iris Lens: Type DC drive
→ Electronic Shutter Range: 1 ~ 1/100,000 sec
→ Wide Dynamic Range: 60 dB
→ White Balance Range: 2,000° to 10,000°K
→ Sensitivity: f/1.3; 2,850°K; SNR >24 dB
→ Color (1x/33 ms): 0.5 lux
→ Color SENS (15x/500 ms): 0.12 lux
→ Dome Attenuation:
→ Clear: Zero light loss
→ Smoked: f/1.0 light loss
→ Construction:
→ Back-box: Cast aluminum and polycarbonate plastic
→ Trim ring: Polycarbonate plastic
→ Bubble: Acrylic plastic
→ Finish: White/Black
→ Weight:
→ Unit: 0.35 kg (0.77 lb)
→ Shipping: 0.91 kg (2.00 lb)
→ Available Languages: Chinese, English, French, German, Italian, Portuguese, Russian, Spanish, and Turkish
→ Port: RJ-45 connector for 100Base-TX, Auto MDI/MDI-X
→ Cable Type: Cat5 or better for 100Base-TX
→ Power Input: PoE (IEEE 802.3af class 2)
→ Power Consumption: <6 W
→ Current Consumption:
→ PoE: <200 mA maximum
→ Service Port: External 3-connector, 2.5 mm provides NTSC/PAL video output
→ Accessory Port: Connects Pelco accessories
→ Audio:
→ Streaming Bidirectional: full or half duplex
→ Input/Output: Line level/external microphone input; 600-ohm differential, 1 Vp-p max signal level; built-in microphone
→ Compression: G.711 PCM 8 bit, 8 kHz mono at 64 kbit/s
→ Pan/Tilt Adjustment: Manual
→ Pan: 355°
→ Tilt: 180°
→ Rotate: 220°
→ Operational Temperature: 0° to 50°C (32° to 122°F)
→ Operational Humidity: 20% to 80%, noncondensing
→ Video Encoding: H.264 Base profile and MJPEG
→ Video Streams: Up to 2 simultaneous streams; the second stream is variable based on the setup of the primary stream
→ Frame Rate: Up to 30, 25, 24, 15, 12.5, 12, 10, 8, 7. 5, 6, 5, 4, 3, 2, 1 (dependent upon coding, resolution, and stream configuration)
→ Additional Resolutions: 640 x 512, 640 x 352, 480 x 368, 480 x 272, 320 x 256, and 320 x 176
→ Supported Protocols: TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, SNMP v2c/v3, QoS, HTTP, HTTPS, LDAP(client), SSH, SSL, SMTP, FTP, and 802.1x (EAP)
→ Users Unicast: Up to 20 simultaneous users depending on resolution settings (2 guaranteed streams)
→ Multicast: Unlimited users H.264
→ Security Access: Password protected
→ Software Interface: Web browser view and setup
→ Pelco System Integration: Endura 2.0 (or later) or Digital Sentry 4.3 (or later)
→ Open IP Integration: Pelco IP camera API
→ Min. System Requirements:
→ Processor: Pentium® 4 microprocessor, 1.6 GHz
→ Operating System: Microsoft® Windows® XP, Windows Vista®, or Mac® OS X 10.4 (or later)
→ Memory: 512 MB RAM
→ Network Interface Card: 100 megabits (or greater)
→ Monitor: Minimum of 1024 x 768 resolution, 16- or 32-bit pixel color resolution
→ Web Browser*: Internet Explorer® 7.0 (or later) or Mozilla® Firefox® 3.5 (or later); Internet Explorer® 8.0 (or later) is recommended for configuring analytics
→ Media Player**: Pelco Media Player or QuickTime® 7.6.5 for Windows XP, Windows Vista, or QuickTime 7.6.4 for Mac OS X 10.4
→ *Internet Explorer is not supported by Mac OS X 10.4.
→ **This product is not compatible with QuickTime version 7.6.4 for Windows XP or Windows Vista. If you have this version installed on your PC, you will need to upgrade to QuickTime version 7.6.5.
The Pelco IM-10 is a 1.3 megapixel (MPx) network indoor fixed dome camera designed with industry-leading image quality and high performance processing power. From back box wiring to focusing the lens, the IM10 Series is designed to install quickly and easily.
Sarix technology defines the next generation of video security imaging performance, delivering high definition (HD) resolution, advanced low-light capabilities, consistent color science, and fast processing power. The H.264 compression video files are considerably smaller, making HD video more affordable. The IM10 Series contains an integrated varifocal 2.8 ~ 10 mm megapixel lens. All models include a camera in a compact indoor enclosure that is ready to install.
The IM 10 supports two simultaneous video streams. The two streams can be compressed in MJPEG and H.264 formats across several resolution configurations. The streams can be configured in a variety of frame rates, bit rates, and group of pictures (GOP) structures for additional bandwidth administration.
The Pelco Camera Sabotage behavior is a standard feature of the IM10 Series. This behavior detects contrast changes in the field of view. An alarm is triggered if the lens is obstructed with spray paint, a cloth, or covered with a lens cap. Any unauthorized repositioning of the camera also triggers an alarm.
The IM10 Series uses a standard Web browser for powerful remote setup and administration. Window Blanking Window blanking is used to conceal user-defined privacy areas that cannot be viewed by an operator. The IM10 Series supports up to four blanked windows. A blanked area will appear on the screen as a solid gray window.
The IM10 Series easily connects to Pelco IP and hybrid systems such as Endura® version 2.0 (or later) and Digital Sentry® version 4.3 (or later). The camera is also compatible with Digital Sentry NVs (DS NVs), a full-featured video management software. DS NVs includes four free Pelco IP licenses and allows for the management of video from up to 64 cameras. The IM10 Series features open architecture connectivity to third-party software. Pelco offers an application programming interface (API) for interfacing with Pelco's network cameras.
Similar Models:
IM10C10-1: 1.3 MPx, color, 2.8 ~ 10 mm varifocal megapixel lens, white trim ring, clear dome
IM10C10-B1: 1.3 MPx, color, 2.8 ~ 10 mm varifocal megapixel lens, black trim ring, clear dome
