Pelco SD4N35-HPE 35x Heavy-Duty Environmental Indoor/Outdoor Day/Night Digital Pan/Tilt/Zoom High-Speed
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ Scanning System: Interlace/Progressive selectable
→ Image Sensor: 1/4-inch EXview HAD
→ Effective Pixels:
→ NTSC: 768 (H) X 494 (V)
→ PAL: 752 (H) X 582 (V)
→ Horizontal Resolution:
→ NTSC: 540 TV Lines
→ PAL: 540 TV Lines
→ Lens: f/1.4 (focal length, 3.4 ~ 119 mm)
→ Zoom: 35X optical, 12X digital
→ Zoom Speed (optical range): 3.2/4.6/6.6 seconds
→ Horizontal: 55.8° at 3.4 mm wide zoom
→ Angle of view: 1.7° at 119 mm telephoto zoom
→ Focus: Automatic with manual override
→ Maximum Sensitivity at 35 IRE:
→ NTSC/EIA: 0.55 lux at 1/60 sec(color); 0.018 lux at 1/2 sec(color); 0.00018 lux at 1/2 sec(B-W)
→ PAL/CCIR: 0.45 lux at 1/50 sec(color); 0.015 lux at 1/1.5 sec(color); 0.00015 lux at 1/1.5 sec(B-W)
→ Sync System: Internal/AC line lock, phase adjustable using remote control, V-Sync
→ White Balance: Automatic with manual override
→ Shutter Speed: Automatic (electronic iris)/Manual
→ NTSC: 1/2 ~ 1/30,000
→ PAL: 1/1.5 ~ 1/30,000
→ Iris Control: Automatic iris control with manual override
→ Gain Control: Automatic/OFF
→ Video Output: 1 Vp-p, 75 ohms
→ Video Signal-to-Noise: >50 dB
→ Wide Dynamic Range: 128X
→ Electronic Image Stabilization: Integrated/Selectable
→ Image Enhancement: Integrated/Selectable
→ Video Motion Detection: Integrated
→ Analog: NTSC/PAL
→ Digital Compression: MJPEG, MPEG-4 (available only with Microsoft® Internet Explorer®)
→ Video Streams: 3, simultaneous
→ Video Resolutions: NTSC; PAL
→ 4CIF: 704 x 480; 704 x 576
→ 2CIF: 704 x 240; 704 x 288
→ CIF: 352 x 240; 352 x 288
→ QCIF: 176 x 120; 176 x 144
→ Bit Rate Configurable:
→ MPEG-4: 30 ips, 2 Mbps for primary stream, 1 Mbps for secondary stream; implements EnduraView
→ MJPEG: 15 ips, 3 Mbps, MJPEG
→ Web User Interface: Pelco Device Utility interface for viewing HTTP, requires Java Runtime Environment (JRE™)
→ Users: 5 simultaneous users MJPEG and MPEG-4 unicast; unlimited number of users using multicast (MPEG-4 only)
→ Minimum System Requirements:
→ Processor: Intel® Pentium® 4 microprocessor, 1.6 GHz
→ Operating System: Windows® 98, Windows 2000, Windows XP (or later), or Mac® OS X 10.3.9 (or later)
→ Memory: 512 MB RAM
→ Network Interface Card: 100 megabits
→ Web Browser: Internet Explorer 5.5 (or later); Mozilla® Firefox® 1.5 (or later)
→ Monitor: Minimum of 1024 x 768 resolution, 16- or 32-bit pixel color resolution
→ Firmware Upgrade: Pelco Device Utility or Endura Application
→ Supported Protocols: TCP/IP, UDP/IP (unicast, multicast IGMP), UPnP, DNS, DHCP, RTP, NTP
The Pelco SD4N35HPE dome systems incorporate all of the features and functions of Spectra IV (including analog), while allowing you to control and monitor video over an IP network from virtually anywhere in the world. Spectra IV IP is a high-speed dome with a built-in 100Base-TX network interface for live streaming to any network application.
The SD4N35 HPE dome system also features open architecture connectivity for third-party software recording solutions allowing integration into virtually any IP-based system. It is also compatible with Digital Sentry® video management systems. As with all Pelco IP camera solutions, Spectra IV IP is Endura Enabled™ to record, manage, configure, and view multiple live streams.
When connected to an Endura ® network-based video security system, the dome system has access to EnduraStor™ and EnduraView™ for optimized image quality and bandwidth efficiency. Spectra IV IP is one of the only solutions on the market that allows you to view and control analog video while viewing, recording, and controlling network IP video. There is no need to abandon your current analog infrastructure if you are making the move to network video as a recording solution. Continue to monitor and control video in the analog domain while recording video in the network domain, and let Spectra IV IP's professional compression method do the work for you without the need for external encoders.
Spectra IV IP features the same ease of installation and ease of maintenance that you have come to expect from Spectra IV. Each dome system consists of a back box, a dome drive, and a lower dome. These three system components are interchangeable with other Spectra IV IP dome systems, making retrofitting and application adjustments simple. As with all Spectra dome systems, Spectra IV IP features several back box options. All back boxes feature built-in memory, which can be used to store camera and location-specific dome settings, including labels, presets, patterns, and zones.
All cameras in Spectra IV IP dome drives feature an EXview HAD™ imager for increased sensitivity and LowLight™ technology allowing the cameras to compensate for scenes where minimal light is present. Both the 27X and the 35X cameras feature built-in motion detection and advanced 128X wide dynamic range (WDR) that enables the system to compensate for scenes where dramatic contrasts in lighting are present. The 35X day/night camera's electronic image stabilization digitally reduces blurring of the camera image due to vibration caused by external sources, such as wind and traffic.
