Sennheiser EM 2050 Twin Wireless Receiver

→ RF frequency range: 516 - 865 MHz
→ Carrier Frequency: max. 3,000
→ Presets: max. 64
→ Switching bandwidth: max. 75 MHz
→ Peak deviation: ±48 kHz
→ Squelch: off, 5 - 25 dBμV can be set in 2 dB steps
→ Intermodulation spacing: ≥ 75 dB
→ Antenna connector: 2 BNC (50Ω)
→ Cascadable: 2 BNC (50Ω)
→ Gain: 0 dB ±0.5 dB based on antenna inputs
→ Compander: HDX
→ Frequency response: 25 - 18,000 Hz
→ Signal-to-noise-ratio: > 120 dB(A)
→ Total harmonic distortion (THD): < 0.9%
→ XLR connector: 2 x XLR-3 + 2 x 6.3 mm jack
→ Audio output level (balanced): +18 dBu max Setting range: 49 dB in 1 dB steps + 6 dB gain reserve
→ Booster: 12 V DC, 2 x 200 mA Short-circuit proof
→ Operating temperature: -10 °C - + 55 °C
→ Power supply: 100 - 240 V AC, 50/60 Hz
→ Current consumption max 0.25 A
→ Dimensions (receiver): 217 x 483 x 43 mm
→ Weight (receiver): 2,900 g
→ Rugged 19" all-metal housing with integrated power supply unit
→ Up to 3000 frequencies in up to 75 MHz switching bandwidth
→ 20 fixed frequency banks with up to 64 compatible presets
→ 6 banks each with up to 64 tunable channels
→ True diversity technology for best reception quality
→ Integrated antenna splitter for cascading up to 8 devices without using additional splitters
→ Pilot tone squelch for interference-free operation
→ Scan feature within the channel band system
→ Continuous scanning together with Sennheiser's Wireless Systems Manager
→ Frequency setting in 25 kHz steps
→ Squelch setting always visible on the display
→ Antenna cables for active antenna supply
→ Transformer-balanced audio outputs
→ HDX noise reduction system with signal-to-noise ratio less than 120 dB(A)
→ Ethernet for connecting to a PC
→ User-friendly menu interface with two-color backlit graphic display (red as a warning)
→ Transmitters can be configured from the receiver menu
→ Transmitters can be synchronized over the infrared interface
→ 4 selectable equalizer presets
→ Soundcheck mode for monitoring transmission conditions
→ Monitoring and control using Sennheiser WSM PC software
→ User-friendly menu interface with two-color backlit graphic display (red as a warning)
→ Adjustable headphone connections.