Sennheiser EW 100 ENG G3 ENG System With Bodypack/receiver/plug-on Transmitter

→ Transmission/receiving frequencies: 1680
→ Presets: 12
→ Switching bandwidth: 42 MHz
→ Peak deviation: ±48 kHz
→ Compander: HDX
→ Frequency response (microphone): 80 - 18,000 Hz
→ Signal-to-noise-ratio: > 110 dB(A)
→ Total harmonic distortion (THD): <0.9%
→ In compliance with: ETS 300422 , ETS 300445 , CE , FCC
→ XLR connector: 3.5 mm jack
→ Audio output level (balanced): + 10 dBu max
→ Dimensions (receiver): 3.2 x 2.5 x .9 in. (82 x 64 x 24 mm)
→ Weight (receiver): Approx. 5.6 oz. (160 g)
→ RF output power: 30 mW
→ Operating time: > 8 h
→ Input voltage range: Mic/Line: 1.8V/3V (SK 100 G2), Mic: 1.2V (SKP 100 G2)
→ Dimensions (transmitter): 3.2 x 2.5 x 0.9 in. / 82 x 64 x 24 mm (SK 100 G2); 4.1 x 1.7 x 1.7 in. / 105 x 43 x 43 mm (SKP 100 G2)
→ Weight (transmitter): Approx. 5.6 oz. / 160 g (SK 100 G2); 6.9 oz. / 195 g (SKP 100 G2)
→ Transducer / microphone type: elektret
→ AF sensitivity: 20 mV/Pa
→ Sound pressure level (SPL): 130 dB(SPL) max.
→ Pick-up pattern: omni-directional
→ Sturdy metal housing (transmitter and receiver)
→ 42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception
→ Enhanced frequency bank system with up to 12 compatible frequencies
→ Adaptive-diversity reception for high reception quality
→ Pilot tone squelch for eliminating RF interference when transmitter is turned off
→ Automatic frequency scan feature searches for available frequencies
→ Enhanced AF frequency range
→ Increased range for audio sensitivity
→ Wireless synchronization of transmitters via infrared interface
→ User-friendly menu operation with more control options
→ Illuminated graphic display, (transmitter and receiver)
→ Auto-Lock function avoids accidental changing of settings
→ HDX compander for crystal-clear sound
→ Transmitter and receiver feature battery indicatation in 4 steps
→ Programmable Mute function
→ Contacts for recharging BA 2015 accupack directly in the transmitter
→ Wide range of accessories adapts the system to any requirement