Sentech STC-AF66A Auto Focus Block Camera (High Resolution)

→ Image Sensor: 1/6" Interline Color CCD (ICX296AKA)
→ Effective Picture Element: 768 (H) x 494 (V)
→ Total Picture Element: 811 (H) x 508 (V)
→ Cell Size: 3.2 (H) x 3.725 (V) μm
→ Scanning System: 2:1 Interlace / Non-Interlace
→ Scanning Frequency: 60Hz
→ Vertical Frequency: 59.94 Hz
→ Horizontal Frequency: 15.734 kHz
→ Resolution: Horizontal: 480 TV Lines, Vertical: 350 TV Lines
→ S/N Ratio: >48dB (AGC Off)
→ Minimum Illumination: 0.22 Lux @ F1.6, 20 IRE; 0.47 Lux @ F1.6, 50 IRE
→ Sync System: Internal / External
→ Video Output: NTSC Composite, Y/C, RGB Interlace, RGB progressive out for PC monitors (VGA compatible)
→ Electronic Shutter: Selectable shutter speeds via the serial communication
→ Gain: Adjustable gain via serial communication or AGC (On/Off)
→ Gamma: Fixed values via the serial communication
→ White Balance: Auto / Fixed white balance selectable via the serial communication
→ Auto: The range is 2800 K to 7000 K
→ Fixed: 3 positions: 3200 K, 4100 K, 5100 K
→ Video Processing: Normal, High Contrast & Super High Contrast Mode, High Contrast Mode Includes: Negative/Positive (Selectable),30 Pre-Programmed Pseudo Colors Combinations (user definable)
→ AF Lens Control (Focus): Auto, Manual Focus or Auto with manual override
→ AF Lens Control (Zoom): Zoom position adjustable via the serial communication
→ Zoom Range: 3.9 ~ 85.8 mm (Optical)
→ Auto Focus Hunting Control: ON/OFF selectable via the serial communication
→ Line Generator: Thickness, color, position & orientation (horizontal and/or vertical) via the serial communication
→ Shadow Mask Generator: Darkness, position & orientation (horizontal and/or vertical) via the serial communication
→ Character Generator: Built-in full screen character generation function via the serial communication
→ Mirror Modes: Normal or mirror image (horizontal reversed) via serial communication
→ Picture Modes: 26 modes: Normal, Bright and 24 pseudo colors
→ Communication: RS232 serial communication
→ Software Control: All camera DSP and lens setup parameters are controlled via the serial communication
→ Auto Focus Lens: Integral lens with motorized zoom, focus and iris controls
→ Optical Zoom: From 3.9mm to 85.8mm (22X Optical Zoom Range)
→ Aperture: F1.6 (at f=3.9 mm) to F3.7 (at f=85.8 mm)
→ Close-Up Lens: No close-up lens
→ Power: Input Voltage: +12Vdc (Input voltage range is 7~15V), Consumption: 250mA at +12Vdc input
→ Temperature and Humidity: Operational: -5°C ~ 45°C, Storage: -30°C ~ 65°C
→ Dimensions: 58.2 (W) x 52.7 (H) x 87.1 (D) mm