Sentech STC-BC83A Raw Digital Output Color Camera

→ Resolution: XGA (0.8 MegaPixel)
→ Image Sensor: 1/3" Interline CCD (ICX204AK)
→ Signal Format: Progressive: Color
→ Frame Rate: 30 fps
→ Effective Picture Element: 1034 (H) x 779 (V)
→ Active Picture Element: 1024 (H) x 768 (V)
→ Chip Size (mm): 5.8 (H) x 4.92 (V) mm
→ Cell Size (um): 4.65 (H) x 4.65 (V) μm
→ Vertical Frequency: 29.59 Hz
→ Horizontal Frequency: 23.23 kHz
→ Horizontal Drive Frequency: 29.5 MHz
→ Scanning Method: Full Scanning, Partial Full Scanning, 1/2 Partial Scanning, 1/4 Partial Scanning, Variable Partial Scanning
→ Sync System: Internal / External
→ Communication: RS232 via DF12-36DS-0.5V connector
→ Trigger Shutter: Edge Preset Trigger (V-reset, Non-reset), Pulse Width Trigger (V-reset, Non-reset)
→ Shutter Speed: OFF, 1/5 to 1/96,000 seconds (Variable at every H and clock)
→ Minimum Illumination: 0.14 Lux at F1.2
→ Gain: 0 to 27 dB
→ S/N Ratio: @ 8bit output: ≤ 3 Digit (Gain 0 dB); @ 10bit output: ≤ 10 Digit (Gain 0 dB)
→ Gamma: 1.0
→ Lens Mount: C Mount
→ Video Output: Digital 8 or 10 bit parallel low voltage output
→ Tap: 1 Tap
→ Interface Connector: DF12-36DS-0.5V (Hirose)
→ Optical Filter: No IR cut filter
→ Optical Center Accuracy: Positional Accuracy in H and V Directions: /- 0.31 mm Rotational Accuracy of H and V: /- 2.1 deg.
→ Power: 12Vdc ± 10%
→ Power Consumption: < 1.8W, 150mA
→ Operating Temperature: It depends on 1) how the system is assembled and 2) how heat conditions are managed within the system.
→ Storage Temperature: -30°C ~ 65°C (-38.1°F ~ 149°F)
→ Dimensions: 28 (W) x 28 (H) x 33 (D) mm (1.1" x 1.1" x 1.29")
→ Weight: 26g (0.91 oz)