Sentech STC-GE83A GigE Monochrome Cameras

→ Resolution: XGA (0.8 MegaPixel)
→ Image Sensor: 1/3" Interline CCD (ICX204AQ)
→ Signal Format: Progressive: Monochrome
→ Frame Rate: 36 fps
→ Active Picture Element: 1024 (H) x 768 (V)
→ Cell Size (um): 4.65 (H) x 4.65 (V) μm
→ Vertical Frequency: 36.42113 Hz at full resolution; 0.44238 to 147.16356 Hz adjustable via the communication
→ Horizontal Frequency: 28.9907 kHz
→ Pixel Frequency: 29.5 MHz
→ Sync System: Internal
→ Video Output: Digital 8, 10 or 12 bit Raw Data or RGB 8 bit
→ Interface: IEEE802.3 (1000BASE-T)
→ Protocol: GigE Vision® 1.2 and GenICam™ 2.0 compliant
→ ALC: Auto iris lens, electronic iris and AGC (ON/OFF)
→ Communication: UART Communication through Ethernet port
→ Trigger Mode: Edge Preset Trigger / Pulse Width Trigger (unlimited extended exposure)
→ Shutter Speed: Preset continuous mode: 10 usec to 16,777,216 usec; Preset trigger mode: 10 usec to 16,777,216 usec; Pulse → width mode: 10 usec to Unlimited usec
→ Minimum Illumination: 24.70 Lux at F1.2, 36.42113 Hz
→ Gain: 0 to 20.4 dB
→ Noise Level: @ 8bit Output: ≤ 3 Digit (Gain 0dB), @ 10bit Output: ≤ 12 Digit (Gain 0dB), @ 12bit Output: ≤ 48 Digit (Gain 0dB)
→ Gamma: 1.0 (Factory default) or uploadable gamma table
→ AOI Function: AOI setting adjustable via the communication
→ Smear Reduction: ON/OFF selectable via the communication
→ Color Interpolation: N/A
→ WhiteBalance: N/A
→ Auto Iris Lens Control: DC IRIS control input with video level target, peak/average and zone weight settings via the communication
→ Lens Mount: C Mount
→ Connectors: RJ45 connector; Power/IO connector: HR10A-7R-6PB (Hirose) or equivalent; DC IRIS lens connector: M1951 (EMUDEN) or equivalent
→ Optical Filter: IR Cut Filter on
→ Shock: 38G (3 directions, 3 times each)
→ Vibration: 10G (20 to 200Hz)
→ Power: Input Voltage: +10.8 to +26.4 Vdc, Consumption: < 5.0 W
→ Operating Temperature: -5°C ~ 35°C
→ Storage Temperature: -30°C ~ 65°C
→ Dimensions: 35 (W) x 35 (H) x 50.6 (D) mm excluding connectors
→ Weight: 120g