
Sentech STC-GEC202A GigE Color Cameras
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ Image Sensor: 1/1.8" Interline CCD (ICX274AQ)
→ Signal Format: Progressive: Color
→ Frame Rate: 15 fps
→ Active Picture Element: 1624 (H) x 1236 (V)
→ Cell Size (um): 4.4 (H) x 4.4 (V) μm
→ Vertical Frequency: 15.31668 Hz at full resolution; 0.29261 to 61.26674 Hz adjustable via the communication
→ Horizontal Frequency: 19.1761 kHz
→ Pixel Frequency: 36.818175 MHz
→ Sync System: Internal
→ Video Output: Digital 8, 10 or 12 bit Raw Data or RGB 8 bit
→ Interface: IEEE802.3 (1000BASE-T)
→ Protocol: GigE Vision® 1.2 and GenICam 2.0 compliant
→ ALC: Auto iris lens, electronic iris and AGC (ON/OFF)
→ Communication: UART Communication through Ethernet port
→ Trigger Mode: Edge Preset Trigger / Pulse Width Trigger (unlimited extended exposure)
→ Shutter Speed: Preset continuous mode: 10 usec to 16,777,216 usec; Preset trigger mode: 10 usec to 16,777,216 usec; Pulse width mode: 10 usec to Unlimited usec
→ Minimum Illumination: 7.27 Lux at F1.2, 15.31668 Hz
→ Gain: 0 to 20.4 dB
→ Noise Level: @ 8bit Output: ≤ 3 Digit (Gain 0dB), @ 10bit Output: ≤ 12 Digit (Gain 0dB), @ 12bit Output: ≤ 48 Digit (Gain 0dB)
→ Gamma: 1.0 (Factory default) or uploadable gamma table
→ AOI Function: AOI setting adjustable via the communication
→ Smear Reduction: ON/OFF selectable via the communication
→ Color Interpolation: Available on RGB output
→ WhiteBalance: Auto, manual and push-to-set white balance is available on both Raw data output and RGB output
→ Auto Iris Lens Control: DC IRIS control input with video level target, peak/average and zone weight settings via the communication
→ Lens Mount: C Mount
→ Connectors: RJ45 connector; Power/IO connector: HR10A-7R-6PB (Hirose) or equivalent; DC IRIS lens connector: M1951 (EMUDEN) or equivalent
→ Optical Filter: IR Cut Filter on
→ Shock: 38G (3 directions, 3 times each)
→ Vibration: 10G (20 to 200Hz)
→ Power: Input Voltage: 10.8 to 26.4 Vdc, Consumption: < 5.00 W
→ Operating Temperature: -5°C ~ 35°C
→ Storage Temperature: -30°C ~ 65°C
→ Dimensions: 35 (W) x 35 (H) x 50.6 (D) mm excluding connectors
→ Weight: 120g
The Sentech STC-GEC202A is part of Sentech's Standard GigE camera line. It features a 1/1.8" color UXGA sensor, 15fps and communication over a 6 pin Hirose or Ethernet connector.
The Sentech STCGEC202A boasts precision housing with accurate CCD alignment, a DC Auto Iris Lens Driver, a user-programmable Area of Interest (AOI) and a Gamma Table that can be imported. This camera meets all industry standards for GigE Vision® and GenICam.
Similar Models:
STC-GEC33A: 1/3", VGA, 648 x 494, 90fps, 35 x 35 x 50.6mm
STC-GEC83A: 1/3", XGA, 1024 x 768, 36fps, 35 x 35 x 50.6mm
STC-GEC133A: 1/3", SXGA, 1360 x 1024, 19fps, 35 x 35 x 50.6mm
STC-GEC152A: 1/2", SXGA, 1360 x 1024, 19fps & 19fps, 35 x 35 x 50.6mm
STC-GEC502A: 2/3", QSXGA, 2448 x 2050, 15fps, 35 x 35 x 50.6mm










