Sentech STC-POCLC232A Power Over CameraLink Color Cube Cameras

→ Resolution: UXGA (2 MegaPixel)
→ Image Sensor: 1/1.8" Interline CCD (ICX274AQ)
→ Signal Format: Progressive: Color
→ Frame Rate: 30fps
→ Total Picture Element: 1688 (H) x 1248 (V) → Active Picture Element: 1620 (H) x 1236 (V)
→ Chip Size (mm): 4.4 (H) x 4.4 (V) μm
→ Cell Size (um): 8.5 (H) x 6.8 (V) mm
→ Vertical Frequency: 30.854Hz
→ Horizontal Frequency: 38.352 kHz
→ Pixel Frequency: 73.636 MHz
→ Scanning Method: Full Scan / Partial Scan (1/2, 1/4, Variable), Binning w/ B/W
→ Sync System: Internal
→ Communication: RS232 via CameraLink connector
→ Trigger Shutter: Pulse Width Trigger (V Reset, Non Reset), Edge Preset Trigger (V Reset, Non Reset)
→ Shutter Speed: OFF, 1/9 to 1/240,000 seconds (Variable at every H and clock)
→ Minimum Illumination: 0.92 Lux @ F1.2
→ Gain: Adjustable Fixed Gain (0 ~ 25dB)
→ S/N Ratio: @ 8bit output: <= 4 Digit (Gain 0 dB); @ 10bit output: <= 15 Digit (Gain 0 dB)
→ Gamma: 1.0
→ Lens Mount: C mount
→ Video Output: Digital 8 or10 bit CameraLink® (Base Configuration)
→ Optical Filter: No IR cut filter
→ Optical Center Accuracy: Position accuracy of H and V direction: +/- 0.31mm, Rotational accuracy of H and V: +/- 2.1 deg.
→ Shock: 70G (3 directions, 3 times each)
→ Vibration: 10G (20 to 200Hz)
→ Power: 12Vdc ± 10%
→ Consumption: < 4.0W, 333mA
→ Operating Temperature: -5°C ~ 40°C (23°F ~ 104°F)
→ Storage Temperature: -30°C ~ 65°C (-22°F ~ 140°F)
→ Dimensions: 28(W) x 28(H) x 36.5(D) mm (1.1" x 1.1" x 1.44") (Not including lens mount or the connector)
→ Weight: Approximately 75.5g (Camera: 65.5g, Tripod: 10g)