Sentech STC-POCLC500A Power Over CameraLink Color Cube Cameras

→ Resolution: QSXGA (5 MegaPixel)
→ Image Sensor: 2/3" Interline CCD (ICX625AQ)
→ Signal Format: Progressive: Color
→ Frame Rate: 16fps
→ Total Picture Element: 2456 (H) x 2058 (V)
→ Active Picture Element: 2448 (H) x 2058 (V)
→ Chip Size (mm): 3.45 (H) x 3.45 (V) μm
→ Cell Size (um): 9.93 (H) x 8.70 (V) mm
→ Vertical Frequency: 16.0Hz
→ Horizontal Frequency: 31.2kHz
→ Pixel Frequency: 64.0 MHz
→ Scanning Method: Full Scan / Partial Scan (1/2, 1/4, Variable), Binning w/ B/W
→ Sync System: Internal
→ Communication: RS232 via CameraLink connector
→ Trigger Shutter: Pulse Width Trigger (V Reset, Non Reset), Edge Preset Trigger (V Reset, Non Reset)
→ Shutter Speed: OFF, 1/8 to 1/209,000 sec. (Variable at every H and clock)
→ Minimum Illumination: 0.32 Lux @ F1.2
→ Gain: Adjustable Fixed Gain (0 ~ 16.3dB)
→ S/N Ratio: 8bit output: <= 4 Digit (Gain 0dB); 10bit output: <= 15 Digit (Gain 0dB); 12bit output: <= 60 Digit (Gain 0dB)
→ Gamma: 1.0
→ Lens Mount: C mount
→ Video Output: Digital 8, 10 or 12 bit CameraLink® (Base configuration)
→ Optical Filter: No IR cut filter
→ Optical Center Accuracy: Position accuracy of H and V direction: +/- 0.31mm, I2°
→ Shock: 70G (3 directions, 3 times each)
→ Vibration: 10G (20 to 200Hz)
→ Power: 12Vdc ± 10%
→ Consumption: < 4.0W, 333mA
→ Operating Temperature: -5°C ~ 40°C (23°F ~ 104°F)
→ Storage Temperature: -30°C ~ 65°C (-22°F ~ 140°F)
→ Dimensions: 35(W) x 35(H) x 40.7(D) mm (1.38" x 1.38" x 1.6") (Not including lens mount or the connector)
→ Weight: 80g (2.82 oz)