Sentech STC-POCLC83A Power Over CameraLink Color Cube Cameras

→ XGA (0.8 MegaPixel)
→ Resolution: XGA (0.8 MegaPixel)
→ Image Sensor: 1/3" Interline CCD (ICX204AK)
→ Signal Format: Progressive: Color
→ Frame Rate: 30fps
→ Total Picture Element: 1077 (H) x 788 (V)
→ Active Picture Element: 1024 (H) x 768 (V)
→ Chip Size (mm): 4.65 (H) x 4.65 (V) μm
→ Cell Size (um): 5.8 (H) x 4.92 (V) mm
→ Vertical Frequency: 29.59 Hz
→ Horizontal Frequency: 23.23 kHz
→ Pixel Frequency: 29.5 MHz
→ Scanning Method: Full Scan / Partial Scan (1/2, 1/4, Variable), Binning w/ B/W
→ Sync System: Internal / External (HD/VD)
→ Communication: RS232 via CameraLink connector
→ Trigger Shutter: Pulse Width Trigger (V Reset, Non Reset), Edge Preset Trigger (V Reset, Non Reset)
→ Shutter Speed: OFF, 1/5 to 1/96,000 seconds (Variable at every H and clock)
→ Minimum Illumination: 0.14 Lux @ F1.4
→ Gain: Adjustable Fixed Gain (0 ~ 27dB)
→ S/N Ratio: @ 8bit output: <= 3 Digit (Gain 0 dB); @ 10bit output: <= 10 Digit (Gain 0 dB)
→ Gamma: 1.0
→ Lens Mount: C mount
→ Video Output: Digital 8 or10 bit CameraLink® (Base Configuration)
→ Optical Filter: No IR cut filter
→ Optical Center Accuracy: Position accuracy of H and V direction: /- 0.31mm, Rotational accuracy of H and V: /- 2.1 deg.
→ Shock: 70G (3 directions, 3 times each)
→ Vibration: 10G (20 to 200Hz)
→ Power: 12Vdc ± 10%
→ Consumption: < 1.8W, 150mA
→ Operating Temperature: -5°C ~ 50°C (23°F ~ 122°F)
→ Storage Temperature: -30°C ~ 65°C (-22°F ~ 140°F)
→ Dimensions: 28(W) x 28(H) x 29.5(D) mm (1.1" x 1.1" x 1.16") (Not including lens mount or the connector)
→ Weight: Approximately 52g (Camera: 43g, Tripod: 9g)