Sentech STC-RCL33A Remote Head CameraLink B/W Cube Cameras

→ Resolution: VGA (0.3 MegaPixel)
→ Image Sensor: 1/3" Interline CCD (ICX424AQ)
→ Signal Format: Progressive: Monochrome
→ Frame Rate: 30, 60, 90fps
→ Total Picture Element: 692 (H) x 504 (V)
→ Active Picture Element: 648 (H) x 494 (V)
→ Chip Size (mm): 7.4 (H) x 7.4 (V) μm
→ Cell Size (um): 5.79 (H) x 4.89 (V) mm
→ Vertical Frequency: 94.784 Hz
→ Horizontal Frequency: 47.2028 kHz
→ Pixel Frequency: 36.8181 MHz
→ Scanning Method: Full Scan / Partial Scan (1/2, 1/4, Variable)
→ Sync System: Internal / External (HD/VD)
→ Communication: RS232 via CameraLink® connector
→ Trigger Shutter: Pulse Width Trigger (V-Reset, Non-Reset); Edge Preset Trigger (V-Reset, Non-Reset)
→ Shutter Speed: OFF, 1/3 ~ 1/40,000 (30fps); 1/7 ~ 1/80,000 (60fps); 1/11 ~ 1/120,000 (90fps), (Variable at every H and clock)
→ Minimum Illumination: 0.04 Lux @ F1.2, 20 IRE; 0.11 Lux @ F1.2, 50 IRE
→ Gain: Adjustable Fixed Gain (0 ~ 27dB)
→ S/N Ratio: @ 8bit output: <= 3 Digit (Gain 0 dB); @ 10bit output: <= 10 Digit (Gain 0 dB)
→ Gamma: 1.0
→ Lens Mount: M10.5 (P=0.5), w/ male threads
→ Video Output: Digital 8 or10 bit CameraLink® (Base Configuration)
→ Optical Filter: No IR Filter
→ Optical Center Accuracy: Position accuracy of H and V direction: +/- 0.31mm, I2°
→ Shock: 70G (3 directions, 3 times each)
→ Vibration: 10G (20 to 200Hz)
→ Power: 12Vdc ± 10%
Consumption: < 3.5W
→ Operating Temperature: -5°C ~ 50°C (23°F ~ 122°F)
→ Storage Temperature: -30°C ~ 65°C (-22°F ~ 140°F)
→ Dimensions: CCU: 28(W) x 28(H) x 36.5(D) mm (Not including the connector); Head: 17(W) x 17(W) x 16.9(D) mm
→ Weight: Approximately 150g (5.29 oz.)