Sentech STC-SS1200 Progressive Scan Remote Head Camera

→ Resolution: VGA (0.3 MegaPixel)
→ Image Sensor: 1/3" Monochrome CCD (ICX424AL)
→ Signal Format: Monochrome Progressive Analog
→ Frame Rate: 90 fps
→ Effective Picture Element: 659 (H) v 494 (V)
→ Active Picture Element: 648 (H) x 494 (V)
→ Chip Size (mm): 5.80 (H) x 4.92 (V)
→ Cell Size (um): 4.65 (H) x 4.65 (V)
→ Vertical Frequency: 89.91 Hz
→ Horizontal Frequency: 47.203 kHz
→ Pixel Clock Frequency: 36.818 MHz
→ Scanning Method: Full Scan, Partial Full Scan, Partial Scan (1/2, 1/4), Binning, Binning Partial Scan (1/1, 1/2, 1/4)
→ Sync System: Internal and External (HD/VD) Automatically
→ Trigger Mode: Edge Preset: V Reset, Non-Reset, Sync Reset, Restart-Reset, Pulse Width Trigger: V Reset, Non-Reset, Sync Reset, Restart-Reset
→ Electronic Shutter: 1/90 ~ 1/10,000 (8 Steps)
→ Minimum Illumination: 0.55 Lux @ F1.2, 20 IRE; 1.64 Lux @ F1.2, 50 IRE
→ Gain: AGC/Manual (4 to 24 dB)
→ S/N Ratio: 52dB (Gain 0dB)
→ Gamma: 0.45 / 1.0
→ Lens Mount: Special Mount (Male 10.5 Female P0.5)
→ Video Output: 1Vp-p, 75Ω
→ Shock: 70G (3 directions, 3 times each)
→ Vibration: 10G (20 to 200Hz)
→ Optical Filter: No IR cut filter
→ Optical Center Accuracy: Position accuracy in H and V direction: +/- 0.31mm
→ InputVoltage: 12Vdc
→ Power Consumption: 2.64W, ≤ 220 mA
→ Operating Temperature: -10°C ~ 45°C ( 14°F ~ 113°F)
→ Storage Temperature: -30°C ~ 60°C ( -22°F ~ 140°F)
→ Dimensions: CCD Head: 20 (W) x 20 (H) x 25 (D) mm (0.8" x 0.8" x 11.85"); CCU: 110 (W) x 80 (H) x 28 (D) mm (4.4" x 1.12" x 3.2"); Cable: 600 mm (24")
→ Weight: CCD Head: 80g (2.82 oz.); CCU: 150g (5.33 oz.)