Sentech STC-TB152USB-ASH USB 2.0 Cased B/W Cameras (Hard Trigger)

→ Image Sensor: 1/2" Interline CCD (ICX205AK)
→ Signal Format: Progressive: Monochrome
→ Operating Systems: Windows 2000, XP, Vista (32 bit) & Linux
→ Drivers: Viewing Software (Simple & Advanced Menus), DirectX, Twain, Linux, NI LabVIEW™
→ Software Development Kit: Standard SDK & Trigger SDK (for Software and Hardware Triggers) - Full documentation provided
→ Maximum Frame Rate: Full Scan: 19 fps, 1/2 Partial Scan: 38 fps, 1/4 Partial Scan: 77 fps
→ Resolution: SXGA (1.3 MegaPixel), Full: 1280 (H) x 1024 (V), 1/2 Partial: 1280 (H) x 476 (V), 1/4 Partial: 1280 (H) x 184 (V)
→ Chip Size (mm): 7.60 (H) x 6.20 (V)
→ Cell Size (um): 4.65 (H) x 4.65 (V)
→ Pixel Clock Frequency: 36.818 MHz
→ Trigger Method: Hardware & Software Trigger (Free-run / Edge preset / Pulse Width / Start & Stop)
→ Scanning Method: Full Progressive, Partial Scanning (1/1, 1/2, 1/4), Variable
→ Sync System: Internal Sync
→ Scanning System: Progressive
→ Shutter Speed: Auto / Manual (Set via Software)
→ Minimum Illumination: 1.24 Lux @ F1.2, 20 IRE, 2.7 Lux @ F1.2, 50 IRE
→ Ext. Low Light Capability: Extended Low Light Capability via Software Trigger
→ Gain: Auto / Manual (Set via Software)
→ Gamma: Manual (Set via Software)
→ Lens Mount: C Mount
→ White Balance: Auto / Manual / One-shot (Set via Software)
→ Video Output: USB 2.0 High Speed
→ Shock: 70G (3 Directions, 3 Times Each)
→ Vibration: 10G (20 to 200Hz)
→ Power: 2.25W, < 450mA
→ Input Voltage: 5Vdc via USB port
→ Operating Temperature: 0°C ~ 40°C (32°F ~ 104°F)
→ Storage Temperature: -30°C ~ 65°C (-22°F ~ 149°F)
→ Dimensions: 50 (W) x 50 (H) x 40.8 (D) mm (1.96" x 1.96" x 1.60")
→ Weight: Approximately 130g