Sentech STC-TB202USB-A USB 2.0 Cased B/W Cameras (Standard)

→ Image Sensor: 1/1.8" Interline CCD (ICX274AQ)
→ Signal Format: Progressive: Monochrome
→ Operating Systems: Windows 2000, XP, Vista (32 bit) & Linux
→ Drivers: Viewing Software (Simple & Advanced Menus), DirectX, Twain, Linux, NI LabVIEW™
→ Software Development Kit: Standard SDK & Trigger SDK (for Software and Hardware Triggers) - Full documentation provided
→ Maximum Frame Rate: Full Scan: 15 fps, 1/2 Partial Scan: 30 fps, 1/4 Partial Scan: 60 fps
→ Resolution: UXGA (2 MegaPixel), Full: 1600 (H) x 1200 (V), 1/2 Partial: 1600 (H) x 544 (V), 1/4 Partial: 1600 (H) x 208 (V)
→ Chip Size (mm): 8.50 (H) x 6.80 (V)
→ Cell Size (um): 4.40 (H) x 4.40 (V)
→ Pixel Clock Frequency: 36.818 MHz
→ Trigger Method: Software Trigger (Free-run / Edge preset / Pulse Width / Start & Stop)
→ Scanning Method: Full Progressive, Partial Scanning (1/1, 1/2, 1/4), Variable
→ Sync System: Internal Sync
→ Scanning System: Progressive
→ Shutter Speed: Auto / Manual (Set via Software)
→ Minimum Illumination: 0.73 Lux @ F1.2, 20 IRE, 1.39 Lux @ F1.2, 50 IRE
→ Ext. Low Light Capability: Extended Low Light Capability via Software Trigger
→ Gain: Auto / Manual (Set via Software)
→ Gamma: Manual (Set via Software)
→ Lens Mount: C Mount
→ White Balance: Auto / Manual / One-shot (Set via Software)
→ Video Output: USB 2.0 High Speed
→ Shock: 70G (3 Directions, 3 Times Each)
→ Vibration: 10G (20 to 200Hz)
→ Power: 2.80W, < 560mA
→ Input Voltage: 5Vdc via USB port
→ Operating Temperature: 0°C ~ 40°C (32°F ~ 104°F)
→ Storage Temperature: -30°C ~ 65°C (-22°F ~ 149°F)
→ Dimensions: 51 (W) x 51 (H) x 44.3 (D) mm (2" x 2" x 1.74")
→ Weight: Approximately 145g (5.11oz.)