Shure BETA-98H/C Instrument Microphone

→ Cartridge Type: Electret Condenser
→ Frequency Response: 20 to 20,000 Hz
→ Polar Pattern: Cardioid
→ Output Impedance: 150 ohms
→ Sensitivity (at 1kHz, open circuit voltage): -56 dBV/Pa (1.6 mV); 1 Pascal=94 dB SPL
→ Maximum SPL (1 kHz at 1% THD, 1k ohms load): 155 SPL dB
→ Equivalent Output Noise (A-weighted): 31 dB SPL (typical)
→ Dynamic Range (at 1 kHz, 1 k ohms load): 124 dB; 132 dB
→ Clipping Level (1 kHz at 0.25% THD, 1k ohms load): 3 dBV (1.4 V)
→ Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz): 63 dB
→ Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
→ Power Requirements: 11 to 52 Vdc phantom (1.2 mA)
→ Premier live performance microphone with Shure quality, ruggedness, and reliability
→ Uniform supercardioid pick-up pattern for maximum gain before feedback and superior rejection of off-axis sound
→ Smooth, wide frequency response with gradual presence rise and controlled proximity effect tailored for vocals
→ Advanced cartridge shock mount system absorbs mechanical shock and minimizes handling noise
→ Dent-resistant steel mesh grille and enamel coated metal alloy construction resist wear and abuse
→ Effective built-in pop filter reduces undesirable wind and breath noise
→ Very low susceptibility to RF and electromagnetic hum