Shure SM86 Cardioid Condenser Microphone

→ Type: Condenser
→ Frequency Response: 50 to 18,000 Hz
→ Polar Pattern: Cardioid
→ Sensitivity (at 1,000 Hz) Open Circuit Voltage: -50 dBV/Pa (3.15 mV) (1 Pa = 94 dB SPL)
→ Impedance: 150 Ohms at 1 kHz
→ Recommended minimum load impedance: 600 Ohms
→ Output Clipping Level 1000 Ohm Load at 1,000 Hz: +3 dBV (1.41 V)
→ Maximum SPL (at 1,000 Hz) 1000 ohm load (1% THD): 147 dB
→ Self-Noise: 23 dB typical, A-weighted
→ Dynamic Range (1000 ohms): 124 dB (maximum SPL to A-weighted noise level)
→ Signal-to-Noise Ratio: 71 dB at 94 dB SPL (IEC 651)*S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted
→ Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector
→ Power Requirements: 11 to 52 Vdc, 5.2 mA
→ Case: Dark gray, enamel-painted, die-cast with a stainless steel grille
→ Connector: Three-pin professional audio connector (male XLR type)
→ Net Weight: 284 grams (10 oz)
→ Dimensions: 183 mm (6-3/16 in.) L x 49 mm (1-1/4 in.) W at the widest point
→ Condenser cartridge for studio quality sound
→ Tailored frequency response for a clear reproduction of vocals
→ Rugged construction withstands the rigors of touring sound
→ Cardioid polar pattern minimizes unwanted background noise
→ Excellent choice for stage monitors and personal monitors
→ Built-in three-point shock mount minimizes handling noise
→ Two-stage "pop" filter reduces wind and breath noise