Sony SNCDH120 Network 720p HD Minidome Camera

→ Image device: 1/3 type progressive scan Exmor CMOS sensor
→ Minimum illumination: Color: 0.50lx, BW: 0.30lx (F1.2/ AGC 42dB / 50IRE [IP])
→ Number of effective pixels (H x V): 1.4 Megapixel (1329 x 1049)
→ Electronic shutter speed: 1s to 1/10000s
→ Gain control: Auto
→ Exposure control: Auto, EV Compensation, Auto Slow Shutter
→ White balance mode: Auto (ATW, ATW-PRO), Preset, One-push WB, Manual
→ Lens type: Vari-focal lens
→ Zoom ratio: Optical 2.9X
→ Horizontal viewing angle: 96.5 to 33.9 degrees
→ Focal length: f=2.8 mm to 8 mm
→ F-number: F1.2 (Wide), F1.9 (Tele)
→ Minimum object distance: 300 mm
→ Powered Focus: Yes (Easy Focus)
→ Day/Night *: Yes
→ Noise reduction: Yes
→ Codec image size (H x V): 1280 x 1024, 1280 x 960, 1280 x 800, 1280 x 720, 1024 x 768, 1024 x 576, 800 x 480, 768 x 576, 720 x 576, 720 x 480, 704 x 576, 640 x 480, 640 x 368, 384 x 288, 320 x 240, 320 x 192 (H.264, MPEG-4, JPEG)
→ Video compression format: H.264, MPEG-4, JPEG
→ Codec streaming capability: Dual streaming
→ Maximum frame rate: H.264: 20fps (1280 x 1024) / 30 fps (1280 x 720); MPEG-4: 25fps (1280 x 1024) / 30 fps (1280 x 720); JPEG: 30fps (1280 x 1024) / 30 fps (1280 x 720)
→ Intelligent motion detection: Yes
→ Protocols: IPv4, IPv6, TCP, UDP, ARP, ICMP, IGMP, HTTP, HTTPS, FTP (client only), SMTP, DHCP, DNS,NTP, RTP/RTCP, RTSP, SNMP (MIB-2)
→ ONVIF software: Yes
→ Number of clients: 5
→ Authentication: IEEE802.1X
→ Signal system: NTSC / PAL
→ Ethernet: 10BASE-T / 100BASE-TX (RJ-45)
→ Analog monitor output: Phono jack x 1 (1.0 Vp-p, 75 ohms, unbalanced, sync negative)
→ Sensor input: x 1, make contact, break contact
→ Alarm output: x 1, 24V AC/DC, 1A (mechanical relay outputs electrically isolated from the camera)
→ Weight: 1 lb 3 oz (550 g) with lens
→ Dimensions: 2 7/8 inches x 2 1/2 inches x 5 3/4 inches (72 mm x 63 mm x 145 mm) not including the projecting parts; 2 7/8 inches x 2 1/2 inches x 7 7/8 inches (72 mm x 63 mm x 197 mm) with lens not including the projecting parts
→ Power requirements: PoE (IEEE802.3af compliant)
→ Power consumption: 5.0 W max.
→ Starting temperature: 32°F to 122°F (0°C to 50°C)
→ Working temperature: 14°F to 122°F (-10°C to +50°C)
→ Storage temperature: -4°F to +140°F (-20°C to +60°C)
→ Safety regulation: UL2044, FCC 15B Class A, IC Class A, IEC60950-1, EN55022(A)+EN55024+EN50130-4, VCCI Class A, C-Tick Class A
→ Operating system: Microsoft Windows XP™, Windows Vista™ (32bit), Windows® 7 (32bit)
→ Processor: Intel Core2 Duo 2 GHz or higher
→ Memory: 1 GB or more
→ Web browser: Microsoft Internet Explorer® Ver. 6.0, Ver. 7.0, Ver. 8.0; Firefox® Ver.3.5 (Plug-in free viewer only); Safari® Ver.4.0 (Plug-in free viewer only); Google® Chrome Ver.4.0 (Plug-in free viewer only)
→ Supplied Accessories: CD-ROM (Users Guides, and supplied programs) (1), Wire rope (1), Screw M4 (1), Installation Manual (1)
→ The new "Exmor" CMOS sensor realizes high image quality and high sensitivity for surveillance
→ Easy focus function
→ Power over ethernet (PoE) capability
→ ONVIF conformance (open network video interface forum)
→ * Removable IR Cut Filter.