Toshiba-Teli CS3330BLI Remote head CCD monochrome camera; EIA; Scan area - 6.8(H) X 6.6(V)mm (2/3 type); Camera head dimensions - Ø46 x 41(D)mm

→ Camera Head Dimensions: Ø46 x 41(D)mm
→ CCU Dimensions: 220(W) x 60(H) x 240(D)mm (excluding rubber casters)
→ Weight: approx. 2.6kg
→ Camera Cable Length: 6.3mm(dia.) x 3m length
→ Lens Mount: C-mount
→ TV System: EIA
→ Sensor: Interline transfer CCD (ICX422AL)
→ Effective Pixels: 768(H) x 494(V)
→ Unit Cell Size: 11.6(H) x 13.5(V)µm
→ Sensing Area: 8.8(H) x 6.6(V)mm ( type-2/3)
→ Scan Method: 525 lines, 2:1 interlace
→ Sync. System: Automatic switching between internal / external synchronization
→ Scanning Frequency: 15.734kHz(H), 59.94Hz(V)
→ Aspect Ratio: 4: 3
→ Standard Illumination: 100 lx, F4 (3100K), (AGC OFF, gamma = 1.0)
→ Minimum Illumination: 0.3 lx, F1.4, (gamma = 0.45 with maximum gain)
→ Video Output: VS - 1.0V(p-p) / 75Ω
→ Resolution: 570TVL(H) x 350TVL(V)
→ S/N: 56dB (AGC OFF, gamma = 1.0)
→ External Input Level: 2 to 6V (p-p) HD and VD
→ External Input Impedance: 1kΩ HD and VD
→ Polarity: Negative
→ Pulse Width: HD - 6.4 ±3µsec; 150 to 800µsec
→ Repeat Frequency: f_H = 15.734kHz ±2%; f_v =2 f_H/525
→ Output Level: 3.5 to 4.5V (p-p) / 1kΩ terminated; 8.0 to 9.0V (p-p) / high
→ Output Pulse Width: HD - 6.36 ±0.5micro sec; VD - 572 ±5micro sec
→ Output Repeat Frequency: f_H = 15.73426kHz; f_v = 2 f_H/525
→ Electronic Line Display Lines: 2(H), 2(V)
→ Electronic Line Display Range: Entire screen
→ Electronic Line Display Line Width: Horizontal - 1 scanning line/field; Vertical - approx. 0.5micro sec
→ Electronic Line Display Polarity : White(POSI) / black(NEGA) selectable
→ Electronic Line Display ON/OFF: Switching
→ Electronic Line / Reticle: Internal selector switch; Factory preset - electronic line
→ Gamma: 0.45/1 selectable
→ AGC: ON/OFF switching
→ Electronic shutter: ON/OFF switching
→ Electronic Shutter Speed: Selectable at 1/60sec, 1/125sec, 1/250sec, 1/500sec, 1/1,000sec, 1/2,000sec,1/4,000sec, 1/10,000sec and flicker less
→ CCD Operation Mode: Frame store mode
→ Power Supply: 100VAC ±10%, 50/60Hz,150mA ±20%
→ Ambient Conditions: Temperature 0 through 40°C; Humidity 30 through 90% (Non-condensing)
→ Highly Reliable: Low graphic distortion, stable, impact/vibration resistance
→ Compact and Light Weight: Separate camera head provides ingress/egress in confined areas