Toshiba-Teli CSCX30BC3 Integrated monochrome CCD XGA camera

→ Imager: All-pixel-data-readout interline transfer CCD
→ Resolution: XGA - 1024(H) x 768(V)
→ Total Pixels: 1077(H) x 788(V)
→ Effective Pixels: 1034(H) x 779(V)
→ Video Output Pixels: 1024(H) x 768(V)
→ Scanning Area: 4.81mm(H) x 3.62mm(V) (=Equivalent to 1/3" type CCD size)
→ Unit Cell Size: 4.65µmm(H) x 3.62µmm(V) (Square grid)
→ Scan Method: Non-interlace
→ Synchronization Method: Internal synchronization
→ Aspect Ratio: 4:3
→ Video Output: Compliant with CameraLink standard version 1.2
→ Data: 10 / 8 bit switching (factory default: 8bit)
→ Readout Mode: All pixel readout - 1024(H) x 768(V) [29.99fps]; Partial Scan 1024(H) x 384(V) [52.75fps], 1024(H) x 192(V) [85.14fps]; Minimum lines - 192, minimum step - 1 line
→ Sensitivity: 400 lx, F5.6 (Fixed gain)
→ Minimum Subject Illuminance: 4lx F1.4 (GAIN: 10dB, video level: 50%)
→ Gain: 0 to +12dB [1step= Approx. 0.132dB]
→ Gamma correction: OFF (γ = 1.0 fixed)
→ Power Supply: 12VDC ±10% (ripple 50mVP-P or less)
→ Power Consumption: 1.3W (maximum)
→ Shutter Speed: 8/1 to 1/20,000 sec
→ Random Trigger: Shutter ON / OFF
→ Random Trigger Mode: Fixed, Puulse
→ Driving Frequency: 29.50 MHz (1 CLK) ±100ppm
→ Horizontal Sync Frequency: 23.22 kHz (1H = 1270CLK)
→ Vertical Sync Frequency: 29.99Hz (maximun frequency on all pixel readout mode)
→ Input Signal: TRIG/VD - Camera Link interface input CC1; Polarity - Positive/Negative switching; Pulse width - 2µs min
→ Lens Mount: C-mount
→ Flange Back: 17.526mm
→ Dimensions: 29mm(W) x 29mm(H) x 26.5mm(D) - Not including protrusion
→ Weight: Approx. 45g
→ Performance Assurance: Temperature 0°C to +40°C; Humidity 10% to 90% (no condensation)
→ Operation Guaranteed: Temperature 5°C to +45°C; Humidity 90% or less (no condensation)
→ Storage: Temperature 20°C to +60°C; Humidity 95% or less (no condensation)
→ EMC Conditions (Electro-Magnetic Compatibility): EMI (Electro-Magnetic Interference) EN61000-6-4 conformity; EMS (Electro-Magnetic Susceptibility) EN61000-6-2 conformity
→ Compliance: FCC Part 15 Subpart B class A; RoHS
→ All-Pixel Reading: Reads all pixels in just 1/30 second
→ Full-Frame Shutter: Achieves high resolution without deteriorating vertical resolution
→ Tetragonal Lattice Layout: Facilitates computation for image processing
→ Camera Link interface (power supply type): PoCL
→ Random Trigger Shutter Function: Exposure synchronized with external trigger signals
→ Restart-Reset: Arbitrary timing based on external VD signal input
→ Partial Scan: Speed is further increased because areas other than the image output range specified by the user are not read
→ Ultra-Compact and lightweight: Excellent resistance against vibration and impact