ToteVision LCD-1048HD 10.4-Inch Free Standing HD LCD Monitor
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ GSA: Yes
→ Mount Type: wall/under cabinet
→ Resolution: 1024 x 768 700
→ Brightness: 350cd/m squared (Nit)
→ Contrast: 500:1
→ Display: 10.4" TFT LCD active matrix
→ Back Light: CCFT
→ Input Signal: Composite, component, & S-Video, NTSC/PAL auto sensing, analog RGB, HDMI
→ Colors: 262,144
→ Pixels: 786,432 dots
→ Dot Pitch: 0.206(H) x 0.206(V)mm
→ Pixel Configuration: RGB Vertical Stripe
→ Viewing Angle: 90/90/90/90 degrees
→ Video Input Signal Level: 1.0V P-P (positive) 75 Ohm
→ Actual Visible Screen Size: 210x158mm / 8.3"x6.2"
→ Dimensions Without Deskstand: 269x229x47mm/10.6"x9.0"x1.9"
→ Dimensions With Deskstand: 269x229x152mm/10.6"x9.0"x6.0"
→ Operating Temp: 50-104 degrees F/10-40 degrees C
→ Storage Temp: 14-158 degrees F/10-70 degrees C
→ Power Requirements: 12VDC, 2A negative ground
→ Power Consumption: 12 W
→ Terminal Connections: Composite: BNC IN/OUT jacks, 2 RCA IN jacks; Component: 3 RCA IN jacks, S-Video IN jack; PC: 15-pin mini D-sub; RS-232: 9-pin 3.5 IR IN; Audio: 3.5 PC audio IN, RCA L/R audio inputs, L/R screw down speaker connectors, and 3.5 audio line OUT; Power: 2.1mm
→ Weight: Net = 1.2kg/2.5 lbs; Gross = 3.3kg/7.3 lbs
The Totevision LCD1048HD is HD Compatible (supports 480p/i, 720p, 1080p/i), has Composite video BNC IN/OUT and underscan capability. The LCD 1048HD comes with with an RS-232 serial controller and the rear IR jack allows direct connection for use with IR repeater systems. This unit has on-screen display controls, with front controls for power, select, menu, and volume. The wireless remote control with hot key allows easy toggling between sources. The built-in amplifier provides ample power to drive right and left stereo. The LCD-1048HD has 2 built-in 8 ohm speakers and s peaker output on board allows screw down connection for R/L audio. The 1048HD cabinet is made of durable ABS plastic w/ 2 key hole slots for wall mounting with built-in interface and proper cable exiting for wall arm mounting and is VESA75mm compliant. SPS included, 100~240 VAC, with a response time of 15ms/25ms (rising/falling). The screw down DC feature provides additional security for power connection.
Similar Models:
DC-1500: Factory approved car cord
HM-400: Under-cabinet hinge mount
WM-31: Wall mount bracket (fixed)
WM-302: Wall mount with swing arm & 4-way adjustable
WMC-2342: Ceiling mount bracket for 1.5" NPT pipe
LCD-1048HDM: 10.4" TFT LCD active matrix with 3mm thick tempered glass
LCD-1048HDM2: Dual 10.4" HD Monitors in a 19" Rack Mount with 3mm thick tempered glass
LCD-1048HDL: Flush mount with front controls
LCD-1048HDLX: Flush mount - no front controls
