Description of DN007
Robust construction, compact size, ease of use, and high quality images were the primary considerations behind the
DN-007 design concept. PULNiX uses custom CCD imagers bonded to fiberoptic minifiers to achieve a very small size.
Whether used for surveillance, remotely piloted vehicles or aircraft, industrial or medical imaging, the "007" mini intensifiers make small very low light cameras a practicality.
All "DN" versions use fixed gain intensifiers which are designed for use in applications where little or no operator interface is required (such as
RPV's, unmanned covert installations, ect.).
The DN007 camera is extremely easy to use. All versions use 12V DC power which inputs through a standard PULNiX 12-pin connector located on the rear of the camera.
AGC (on/off) and Gamma (.45 or 1.0) for the CCD camera are switch-selectable on the rear control panel; a manual control for the CCD camera gain adjustment is also located with the other controls.
All "007" ICCD cameras use 1" format C-mount lenses; auto iris lenses are mandatory when bright light conditions are encountered. A back-focus adjustment is built into the front end of all versions. The 1/4-20 tripod mounting plate may be located on the top or bottom of the
DN 007 camera.
|
