1/2-Inch interline transfer CCD image sensor with 768(H) x 494(V) pixels.
480-Line horizontal resolution
50dB signal-to-noise ratio
Min. illumination: 3 lux at FI.4
Full compatibility between camera head and CCU GP-KS162
(CCU) can accept any
GP-KS162H (camera head) So no adjustment is needed when new camera head is
connected to the CCU
Excellent color reproduction for crisper natural image digital RGB signal processing
provides well-balanced color reproduction which is beyond the comparison with other
micro cameras
Sharp and crisp picture DSP features 2H enhance aperture correction and knee circuit
in its digitizer circuit
Fine adjustable AWC/ATW for your specific requirement GP-KS162 accepts fine
color adjustment while Auto White Control (AWC) or Auto Tracing White(ATC) are engaged
Auto Gain Control (AGC)
Electronic Light Control
(ELC) functions control incoming light to the CCD continuously
Auto Light Control keeps constant video signal level by automatically
Adjustable Video Signal Level function which is suitable to adjust video signal level whenever
optical iris is not available in medical applications such as endscope use, etc
Backlight Compensation (BLC). This function has three kinds of image sensing patterns small
sensing zone, wide sensing zone and auto detective sensing zone. Especially auto detective sensing
zone function is suitable to be used with endscope which provides a picutre with optical shading
Versatile output signals composite x 2, Y/C x 1 to avoid cross color. GP-KS162 features
Y/C (S-Video) output which provides well-balanced colors
Reliable signal-board-designed CCU
Easy key access
Wide line-up optional lens accepts optional 3mm super wide angle, 7.5mm wide angle,
12mm pin hole and 15mm/24mm telephoto lenses. Optional C-Mount adaptor
If you don't see it here call 800 284-2288 0r 
