|
Click Here
for Pricing and Availability
|
Description of
PelcoNet
NET-101T
With minimal setup, the
NET-101T Ethernet
transmitter system can be installed and used in minutes in various applications. The only installation required is to configure an IP address using a standard terminal program or any Internet browser and to connect the PelcoNet Transmission System to the network. Sending video and audio over computer networks yields significant savings in reduced costs and simpler installation and management.
The PelcoNet NET
101T CCTV
Transmitter Transmission System consists of two units: a transmitter and a receiver – however, only the transmitter is required to use the system. The transmitter can connect any NTSC or PAL video source to the computer network. The receiver displays the video on a standard NTSC or PAL monitor. Or, an internet browser can be used to display the video on a PC. A bi-directional data interface is availale for remote control of peripheral components (such as pan/tilt/zoom cameras). Transmission of full duplex audio is an option. Video sources (such as cameras) are identified by IP addresses the same as any other equipment connected to a computer network.
In summary, the PelcoNet Transmission System lets you use any existing data network to transmit live video and audio. The PelcoNet Transmission System saves installation costs (no separate cabling required), allows toll-free operation (intranets), and saves management costs (single uniform network).
|
If you don't see it here call 800 284-2288 0r 
