Click Here for Price and Availability

Description of NVT NV-213A-M

The NVT Model NV 213A-M Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

“Up-the-coax” type P/T/Z signals may be sent over the same wire pair.  Used as a receiver, the NV213A–M is fully compatible with qualified OEM cameras that are equipped with an NVT twisted-pair output.

The unparalleled interference rejection and low emissions of the Model NV-213A (-M) allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. With built-in transient protection, damaging voltage spike problems  are eliminated

Features of  NVT NV 213A-M

• Full-motion CCTV video at distances up to 750ft (225m) when used with a passive NVT transceiver or hub model

• Up to 3,000ft (1km) with an NVT active receiver or hub

• Supports "up-the-coax" type P/T/Z control signals up to 750ft (225m)

• No power required

• Exceptional interference rejection

• Built-in transient protection

• Male BNC on the NV-213A-M allows connection directly to the camera

• Compatible with qualified UTP cameras

• Up to 10 NV–213As may be rack mounted using the  NV-RM8/10 Rack Panel Kit

• Limited lifetime warranty

Privacy  |   Terms of Usage   |   Subscribe to Feeds