Click Here for Price and Availability

Description of NVT NV 4PS10-PVD

The NVT model NV-4PS10-PVD combines a 1 Amp/channel power supply with pass through video and telemetry data, for up to 4 cameras, all over UTP wire. Designed for installation in the wiring / IDF telecom closet, or at the Control / /MDF room the NV4PS10-PVD consolidates connectivity via standard 4-pair RJ45 EIA/TIA 568B compliant premises wiring and pinouts.

At the camera, Power, Video and Data connections are made using the NV-216A-PV (power-video only) NV-218A-PVD, or NV-226J-PV transceiver via an RJ45 connector and a single 34-pair cable. Control / MDF room connections are achieved with a single 4-pair RJ45 cable for each group of four cameras. Telemetry data, if required, passes through the NV-4PS10-PVD's data path and is connected to the controller via a second 4-pair RJ45 cable.

Features of NVT NV 4PS10-PVD

• Provides Class 2 SELV camera power and pass-through video & telemetry data connectivity for up to 4 cameras, each via a single RJ45 4-pair UTP cable

• Standard telecom/datacom structured cabling pinouts per EIA/TIA 568B

• Independently selectable 24 or 28 VAC with 1 Amp max per channel

• Automatic-reset fault protection; transient protection

• Individually floating outputs ensure total ground-loop immunity

• Diagnostic LEDs show load/no load, miswires, and overload conditions

• Use with the NV-216A-PV or the NV-218A-PVD or the NV-226J-PV transceiver at the camera

• Power cameras via UTP over significant distances (see power chart)

• 1.75" high x 7.25" deep x 9.25" wide, wall or desk mount

• Limited lifetime warranty

Privacy  |   Terms of Usage   |   Subscribe to Feeds