Pulnix TM-1010 Progressive Scan High Resolution Shutter Camera

For pricing please contact AV Supply.

The PULNiX TM-1010 is a very high resolution monochrome camera utilizing progressive scan interline transfer CCD technology. Specifically designed for low noise and high resolution image capturing, the single channel output produces outstanding shutter and integration characteristics.The camera has externally controlled gain and dynamic range adjustments which allow users to easily vary the imaging parameters of the CCD. A square imager format with symmetrical pixels provides consistent image definition in any orientation. The electronic shutter, which has speeds selectable to 1/16,000 sec., may be asynchronously reset by external pulse control.The scanning clock rate is adjustable to optimize noise relative to scanning speed. The TM-1010 has its own built-in frame store which can capture and output full-frame images in real time. 10-bit, RS-422 digital signal output permits interfacing with external image processing systems. Special interface cables are available for connecting the TM-1010 directly to many existing commercial frame grabbers. All functions are remotely controllable via RS-232C communication. Applications for the TM-1010 include medical and scientific imaging, high definition graphics, on-line inspection, gauging, character reading, archiving, and long range image acquisition.

Specifications

MODEL TM-1010 Imager 1"( 9.1mm x 9.2mm ) progressive scanning interline transfer CCD Pixel 1024 (H) x 1024 (V) Cell Size 9.0µm x 9.0µm Scanning 1050 lines, 15 Hz Sync. Internal/external auto switch HD/VD, 4.0 Vp-p impedance 4.7K VD=15 Hz ±5%, non-interlace HD=15.734 kHz±3% Data clock output 20.034 MHz (std), 10 and 5 MHz selectable Resolution Digital: 1008 (H) x 1018 (V) S/N ratio 60dB at CDS Min. illumination 1.0 lux, f=1.4 without IR cut filter (no shutter). Sensitivity: 10µV/e- Video output Digital 10-bit RS-422 output Analog 1.0 Vp-p composite video, 75 ohm AGC off Gamma 1.0 Lens C-mount Power req. 12V DC, 700 mA (PD-12P supplied) Operating temp. -10°C to 50°C* Vibration & shock Vibration: 7G (200 Hz to 2000 Hz), Shock: 70G Size (W x H x L) 51mm x 67mm x 152mm (2.01" x 2.64" x 5.98") Weight 225 grams ( 7.9 oz ) Power cable 12P-02 (multi-conductor) Power supply K25-12V or PD-12 Auto iris connector None Accessories MP-211-031-113-4300 31-pin mating connector; (30DG-02-40 cable is not included), RS-232 cable & software