Pulnix TM-1040 1" B/W 1K x 1K Progressive Scan

For pricing please contact AV Supply.

The PULNiX TM-1040 is a very high resolution monochrome CCD camera with a 30fps. output rate which permits full-frame asynchronous real-time dynamic image capture. The interline transfer progressive scan CCD achieves outstanding shutter and integration characteristics. Progressive scanning provides full vertical and horizontal resolution during shutter mode, a key advantage over interlace scanning. A square imager format with uniform pixels means superior image definition in any orientation. The electronic shutter, which has speeds to 1/16,000 sec., may be asynchronously reset by external pulse control. On-chip micro lenses are built in for increased sensitivity and fill factor. The TM-1040 has two frame stores which capture the CCD's dual channel signal and output digital and analog images in real time. The camera has a 10-bit, RS-422 digital signal output for interfacing with external image processing systems, and RS-343A high resolution interlace analog output for recording and monitoring (RS-170 is optional). Also standard is an RS-232C remote communications interface. Special interface cables are available for connecting the TM-1040 directly to many existing commercial frame grabbers. Applications for the TM-1040 include medical imaging, high definition graphics, on-line inspection, intelligent transportation systems, gauging, character reading, archiving, and long range image acquisition.

Specifications

MODEL TM-1040 Imager 1" (9.1mm x 9.2mm) Progressive Scanning Interline Transfer CCD Pixel 1024 (H) x 1024 (V) Cell size 9.0µm x 9.0µm Scanning 1050 lines, 30 Hz Sync Internal/External HD/VD, 4.0 Vp-p impedance 4.7K ohm VD=30 Hz ±5%, non-interlace HD=31.468 kHz±3% Data clock output 40.068 MHz Resolution Digital: 1008 (H) x 1018 (V), Analog: over 700 TV lines (H) x 800 TV lines (V) S/N ratio 50dB min. analog, up to 60dB digital Min. illumination 1.0 lux, f=1.4 without IR cut filter (no shutter). Sensitivity: 10µV/e- Video output RS-343A (RS-170 optional), 1.0 Vp-p composite video, 75 ohm and up to10-bit RS-422 output AGC off Gamma 1.0 Lens C-mount, 1 inch format, back focus adjustable Power req. 12V DC, 800 mA Operating temp. -10°C to 50°C* Vibration & shock Vibration: 7G (200 Hz to 2000 Hz), Shock: 70G Size (W x H x L) 68mm x 52mm x 174mm (2.67" x 2.04" x 6.85") Weight 506 grams (17.8 oz) Power cable 12P-02 (multi-conductor) Power supply PD-12 or PD-12P (includes power connector) Auto iris connector None Accessories MP-211-031-113-4300 31-pin mating connector; 30DG-02-40 interface cable; RS-232C cable & software