SINGLE SOURCE SOLUTION: INDUSTRIAL, MACHINE VISION, & CCTV SECURITY SURVEILLANCE
FOR-A Hanabi Audio Video Equipment
FOR-A Professional Broadcast Audio / Video Equipment

FOR-A AD-304 Analog Audio Distribution Amplifier (1 x 6)
FOR-A
FOR-A AD-304
Analog Audio Distribution Amplifier (1 x 6)

PREVIEW (rollover to view)

DESCRIPTION
    The FOR-A AD 304 is a 1 x 6 audio distribution module capable of distributing 6 analog audio signals.1 x 6 audio distribution module capable of distributing 6 analog audio signals. The AD304 can be used in FOR-A's DF-300A/DF-300 distribution frame.
SPECIFICATIONS
    Video Input Analog composite = 1.0 Vp-p; 75Ω or loop-through (internally selectable) 1 input (at 1 x 6 distribution) / 75Ω, 2 inputs (at dual 1 x 3 distribution)
    Video Output Analog composite = 1.0 Vp-p; 75Ω, 6 outputs (at 1 x 6 distribution) / 3 outputs x 2 (at dual 1 x 3 distribution)
    Frequency Response 60 Hz to 30 MHz = ±0.5 dB, roll off above 30 MHz
    DG/DP 0.2% / 0.2° (APL10% to 90%)
    H/V Tilt Less than 0.5%
    K-factor Less than 0.5% (2T pulse)
    S/N Ratio Better than 60 dB (p-p/rms)
    Crosstalk Better than 60 dB
    Cable Equalization 0 m to 200 m (5C-2V or equivalent)
    Temperature 0°C to 40°C
    Humidity 30% to 90% (no condensation)
    Power 12 V DC, -12 V DC
    Consumption 12 V DC = 1.1 W, -12 V DC = 0.7 W
    Dimensions Fit to DF-300A/DF-300 frame
    Weight 0.05 kg
    Accessory Operation manual


Quick Quote







Compare up to 3 items


FOR-A ADA-205A Analog Audio Distribution Amplifier (1 x 10 or Stereo 1 x 5)
FOR-A
FOR-A ADA-205A
Analog Audio Distribution Amplifier (1 x 10 or Stereo 1 x 5)

PREVIEW (rollover to view)

DESCRIPTION
    The FOR-A ADA 205A is a high performance balanced audio distribution amplifier capable of producing up to 10 monaural outputs from 1 monaural input. The ADA205A produces balanced audio with up to 10 monaural outputs or up to 5 stereo outputs. It is capable of controlling gain with the volume on the front panel.
SPECIFICATIONS
    Audio Input 0 dB Balanced 600O or 10kO (selectable); Stereo L/R or Monaural x 1 (selectable), XLR 3-pin connector
    Audio Outputs 0 dB ±0.5 dB within Balanced 600O; Stereo L/R x 5 or Monaural x 10 (selectable), XLR 3-pin connector
    Max. I/O Level 18 dB
    Gain Range Approx. ±8 dB (for input signal)
    Frequency Response 20 Hz to 20 kHz: ±0.5 dB (1 kHz, 0 dB base)
    Distortion Less than 0.02% (at 1 kHz, 0 dB input)
    S/N Ratio Better than 75 dB (at 1 kHz, 0 dB input)
    Temperature 0°C to 40°C
    Humidity 30% to 90% (no condensation)
    Power 100 V AC to 117 V AC or 220 V AC to 240 V AC ±10%, 50/60 Hz
    Consumption 12 VA (10 W) at 100 V AC, 11 VA (9 W) at 220 V AC
    Dimensions 430 (W) x 44 (H) x 105 (D) mm
    Weight 2 kg
    Accessories Operation manual, AC cord, Rack mount brackets


Quick Quote







Compare up to 3 items


FOR-A CC-106 Analog Video Cable Compensator (1 x 6)
FOR-A
FOR-A CC-106
Analog Video Cable Compensator (1 x 6)

PREVIEW (rollover to view)

DESCRIPTION
    The FOR-A CC 106 is a 1 x 6 composite video distribution, plus built-in cable compensation to offset long line connection signal loss. The CC106 compensates long line connection signal loss and decline of input video frequency.
FEATURES
    Max. 200 m (3C-2V or equivalent)
SPECIFICATIONS
    Video Input Analog composite = 1.0 Vp-p; loop-through BNC x 1
    Video Output Analog composite = 1.0 Vp-p; 75Ω BNC x 6
    Frequency Response 60 Hz to 12 MHz ±0.5 dB; roll off above 12 MHz (when 0 m cable equalization)
    Tilt 60 Hz, Less than 1% (when 0 m cable equalization)
    Overshoot 15 kHz, Less than 1% (when 0 m cable equalization)
    DG/DP 0.3% / 0.3° (when 0 m cable equalization)
    Cable Equalization Max. 300 m (5C-FB or equivalent)
    Humidity 0°C to 40°C
    Humidity 30% to 90% (no condensation)
    Power 100 V AC to 117 V AC or 220 V AC to 240 V AC ±10%, 50/60 Hz
    Consumption 5 VA (Voltage must be specified when ordering.)
    Dimensions 215 (W) x 44 (H) x 120 (D) mm
    Weight 1.2 kg
    Accessories Operation manual, AC cord


Quick Quote







Compare up to 3 items


FOR-A CEQ-100HS S3D Processor / Color Equalizer
FOR-A
FOR-A CEQ-100HS
S3D Processor / Color Equalizer

PREVIEW (rollover to view)

DESCRIPTION
    The FOR-A CEQ 100HS allows extremely precise color matching by using automatic color calibration by means of image recognition technology. The CEQ100HS has a stereoscopic 3D feature and automatic color calibration. This product features independent color calibration and/or color correction for 2 out of 4 video inputs and can store and recall color calibration/correction parameters. The CEQ-100HS has an internal standard color chart for color calibration and standard color bars generator.
SPECIFICATIONS
    Video Formats HD-SDI = 1080/59.94i, 1080/50i, 720/59.94p, 720/50p; SD-SDI = 525/60, 625/50; (Selected in the menu)
    Video Input HD-SDI = 1.5 Gbps; SD-SDI = 270 Mbps; 75Ω BNC x 4
    Genlock Input BB - NTSC = 0.429 Vp-p; BB - PAL = 0.45 Vp-p; Tri-sync = ±0.3 Vp-p, 75Ω BNC x 1, loop-through (Terminate with 75O terminator, if unused.)
    Video Output HD-SDI = 1.5 Gbps; SD-SDI = 270 Mbps; 75Ω BNC x 4 (2 x 2)
    Signal Processing 4:2:2 (YPBPR)
    Internal processing = 44:4 (RGB)
    Quantizing 10-bit
    I/O delay FS mode = 1 frame; LS mode = 1 line (when the input phase is the same as the genlock phase)
    Input phase adjustment FS mode = approx. 1 frame; LS mode = approx. ± 0.5 H
    Interfaces VGA = SXGA Output resolution (1280 x 1024), 15-pin mini D-sub (female) x 1; USB = USB 2.0, Series-A type connector x 4 (2 ports on front and 2 ports on rear); GPI/ALARM = 15-pin D-sub (female) x 1; ALARM = power and fan alarm outputs (make relay contact); LAN1/LAN2 = (Not used); REMOTE = (Not used); RS-232C = (Not used)
    Temperature 10°C to 40°C
    Humidity 20% to 80% (no condensation)
    Power 100 V AC to 240 V AC ±10%, 50/60 Hz
    Consumption 100 VA (99 W) at 100 V AC, 101 VA (89 W) at 200 V AC
    Dimensions 430 (W) x 44 (H) x 500 (D) mm, EIA 1 RU
    Weight 9 kg
    Consumables (if used 24 hours a day at normal temperature) Cooling fan = Replace every 3 years; Power = Replace every 5 years; Battery = Replace every 5 years


Quick Quote







Compare up to 3 items


FOR-A CSF-101 CSF Frame (1 Slot)
FOR-A
FOR-A CSF-101
CSF Frame (1 Slot)

PREVIEW (rollover to view)

DESCRIPTION
    The CSF 101 is designed to support FOR-A's VTG-150 Video Timer. The CSF101 has a built in power supply for support of installed module.
SPECIFICATIONS
    Support 1 module
    Temperature 10°C to 40°C
    Humidity 30% to 90% (no condensation)
    Power 12 V DC (AC adaptor supplied)
    Consumption 16 VA (12 W)
    Dimensions 215 (W) x 44 (H) x 301 (D) mm EIA 1 RU half rack size
    Weight 1.8 kg (w/o module)
    Accessories Operation manual, AC adapter


Quick Quote







Compare up to 3 items


FOR-A CSF-103 CSF Frame (3 Slots)
FOR-A
FOR-A CSF-103
CSF Frame (3 Slots)

PREVIEW (rollover to view)

DESCRIPTION
    The CSF 103 is designed to support FOR-A's VTG-150 Video Timer. The CSF103 has built in power supply for support of installed module.
SPECIFICATIONS
    Support 3 modules
    Temperature 10°C to 40°C
    Humidity 30% to 90% (no condensation)
    Power 100 V AC to 117 V AC or 220 V AC to 240 V AC ±10%, 50/60 Hz
    Consumption 26 VA (18 W) at 100 V AC / 32 VA (18 W) at 220 V AC
    Dimensions 430 (W) x 44 (H) x 301 (D) mm EIA 1 RU
    Weight 3.0 kg (w/o modules)
    Accessories Operation manual, AC cord, Rack mount brackets


Quick Quote







Compare up to 3 items


FOR-A CSF-110 CSF Frame (10 Slots)
FOR-A
FOR-A CSF-110
CSF Frame (10 Slots)

PREVIEW (rollover to view)

DESCRIPTION
    The CSF 110 is designed to support FOR-A's VTG-150 Video Timer. The CSF110 has built in power supply for support of installed module.
SPECIFICATIONS
    Support 10 modules
    Temperature / Humidity 10°C to 40°C / 30% to 90% (no condensation)
    Temperature / Humidity 10°C to 40°C / 30% to 90% (no condensation)
    Power 100 V AC to 117 V AC or 220 V AC to 240 V AC ±10%, 50/60 Hz
    Consumption 83 VA (52 W)
    Dimensions 430 (W) x 132 (H) x 301 (D) mm EIA 3 RU
    Weight 8.5 kg (w/o modules)
    Accessories Operation manual, AC cord, Rack mount brackets


Quick Quote







Compare up to 3 items


FOR-A DCC-100 Digital Color Corrector
FOR-A
FOR-A DCC-100
Digital Color Corrector

PREVIEW (rollover to view)

DESCRIPTION
    This is a digital color corrector that supports analog composite or SD-SDI input and output signals. It comes with a broad spectrum of functions ranging from the color correction of signals to various clip functions.
FEATURES
    Analog composite or SD-SDI input and output signals supported
    A-to-D or D-to-A conversion function also available
    Varied color correction functions (Balanced, Differential and Sepia modes)
    Proc Amp functions provided (video level, chroma level, chroma phase, setup level)
    Gamma adjustment functions (independent adjustment of G, B and R signals, high/mid/dark tone adjustment)
    Function for dividing the screen into sections to make it easier to compare and check the images before and after correction

Quick Quote







Compare up to 3 items


FOR-A DCC-70HS HD/SD Digital Color Corrector
FOR-A
FOR-A DCC-70HS
HD/SD Digital Color Corrector

PREVIEW (rollover to view)

DESCRIPTION
    A superb HD and SD color corrector, the FOR-A DCC 70HS provides precise control of all color correction parameters, maximizing the appearance of video source signals. The DCC70HS features a HD/SD Digital Color Corrector, Process Amplifier and Legalizer. Versatile color correction modes are available for the DCC-70HS, Balanced, Differential and Sepia.
SPECIFICATIONS
    Video Formats HD-SDI = 1080/59.94i, 1080/50i, 720p/59.94, 720p/60; SD-SDI = 525/60 (NTSC), 625/50 (PAL)
    Video Input HD-SDI = 1.485 Gbps or 1.485/1.001 Gbps; SD-SDI = 270 Mbps 75Ω BNC x 1
    Video Output HD-SDI = 1.485 Gbps or 1.485/1.001 Gbps; SD-SDI = 270 Mbps 75Ω BNC x 2 (Output-1 has a Bypass function)
    Processing 4:4:4 component, 10-bit
    Sampling Frequency HD-SDI - Y = 74.25 MHz, 74.25/1.001 MHz; HD-SDI - C = 37.125 MHz, 37.125/1.001 MHz; SD-SDI - Y = 13.5 MHz; SD-SDI - C = 6.75 MHz
    Quantization Y = 10-bit; C = 10-bit
    I/O Delay HD-SDI = Approx. 3.0 µsec, SD-SDI = Approx. 10 µsec
    Process Control RGB Clip = White; 50% to 300%, Black; -200% to 50%; Composite Clip = White; 50% to 150%, Black; -50% to 50%; Color Correction: Mode = Balanced, differential, sepia (selectable); White Level = 0% to 200% ea., G, B and R; Black Level = 0% to 200% ea., G, B and R; Gamma Level = 50% to 150% ea., G, B and R (Adjustable between Highlight, Middle and Shadow level)
    Interfaces GPI = 15-pin D-sub (female) x 1; RS-422 = 9-pin D-sub (female) x 1 (connection for DCC-OUA)
    Temperature 5°C to 40°C
    Humidity 30% to 90% (no condensation)
    Power 100 V AC to 240 V AC ±10%, 50/60 Hz
    Consumption 25 VA (24 W) at 100V AC to 120 V AC; 31 VA (23 W) at 220 V AC to 240 V AC
    Dimensions 212 (W) x 44 (H) x 350 (D) mm EIA 1 RU half rack size
    Weight 3 kg
    Consumables (if used 24 hours a day at room temperature): Cooling fan = Replace every 5 years
    Accessories Operation manual, AC cord, Control cable PC-2076-3 (10 m)


Quick Quote







Compare up to 3 items


FOR-A DCC-OUA Remote Control Unit (for DCC-100/70HS)
FOR-A
FOR-A DCC-OUA
Remote Control Unit (for DCC-100/70HS)

PREVIEW (rollover to view)

DESCRIPTION
    The DCC-OUA can remotely control of multiple DCC-Series. It also additionally allows the user to perform Y gamma and color correction of DCC-Series processed signals.
SPECIFICATIONS

    Interfaces

Quick Quote







Compare up to 3 items


FOR-A DIGISTORM HD/SD Virtual Studio  26 RCG System
FOR-A
FOR-A DIGISTORM
HD/SD Virtual Studio & RCG System

PREVIEW (rollover to view)

DESCRIPTION
    The digistorm is the state-of -the art on-air graphics solution created by the joint development efforts of FOR-A and Brainstorm Multimedia. When the technological resources of FOR-A, a hardware manufacturer and virtual studio integrator, and Brainstorm's eStudio, a virtual studio software program which has been well-established throughout the world, are fused together, the resulting synergy effect opens up a world of "broadcast graphics". Through this new and exciting on-air graphics solution, immediate form is instantly given to the powers of creative imagination.
FEATURES
    Operation support
    Creation support
    Linkage with studio sub-control systems
    Consolidation of system equipment
    Key software

Quick Quote







Compare up to 3 items


FOR-A DNE-2 HD Digital Noise Eraser
FOR-A
FOR-A DNE-2
HD Digital Noise Eraser

PREVIEW (rollover to view)

DESCRIPTION
    The FOR-A DNE 2 is a realtime noise eraser that incorporates the best of FOR-A's image processing technology. Image processing with motion compensation is used to accurately remove only the noise without harming the quality of the original video. The DNE2 is ideal for removing grain noise and specks in video converted from film media and for removing block noise occurring during compression and enhancement of low SN video.

    The DNE-2 features a digital noise eraser that enables removal of grain noise and dust in film. Image processing with motion compensation enables accurate noise removal without motion distortion while maintaining the image outlines. This product removes block noise and mosquito noise caused by low SN video and compression in video. It is ideal as a preprocessor for improving image quality for DVD mastering (compression) and other processes.
SPECIFICATIONS
    Standard 1080/60i, 59.94i, 50i, 30p, 30PsF, 29.97p, 29.97PsF, 25p, 25PsF, 24p, 24PsF, 23.98p, 23.98PsF, 720/60p, 59.94p, 50p
    Video Input HD-SDI = 1.485Gbps or 1.485/1.001 Gbps, 75Ω, 1 input, BNC
    Reference Input BB = 0.429Vp-p (NTSC) / 0.45Vp-p (PAL); Tri-level sync = ±0.3V, 75Ω or loopthrough, 2 inputs, BNC
    Video Output HD-SDI = 1.485Gbps or 1.485/1.001Gbps, 75Ω, 1 channel 4 outputs, BNC (Output 1 functions as bypass output)
    Quantization Y = 10-bit; C = 10-bit
    Sampling Frequency Y = 74.25 MHz or 74.25/1.001 MHz; C = 37.125 MHz or 37.125/1.001 MHz
    Process Amplifier Y level = -30% - 30% (0.5% step); C level = -30% - 30% (0.5% step); Chroma phase = -30° - 30° (0.5° step); Black level = -30% - 30% (0.5% step); Super white = ON/OFF; Super black = ON/OFF; Chroma 100% = ON/OFF
    Color Correction - BAL / DIF mode White level (G, B, R) = 0% - 200% (0.5% step); Black level (G, B, R) = 0% - 200% (0.5% step); Gamma level (G, B, R) = 0% - 200% (0.5% step) (Adjustable between Highlight, Middle and shadow level); Gamma curve = Center, Black, White
    Color Correction - SEPIA mode Sepia level = 0% - 100% (0.1% step); Sepia color = -180° - 179.9° (0.1° step); Sepia gamma level = 0% - 200% (0.5% step)
    Video Clip - YBR clip White = 50% - 109% (0.5% step); Black = -7% - 50% (0.5% step); Chroma = 50% - 111% (0.5% step)
    Video Clip - GBR clip White = 50% - 300% (0.5% step); Black = -200% - 50% (0.5% step)
    Video Clip - VBS clip White = 50% - 150% (0.5% step); Black = -50% - 50% (0.5% step)
    Detail Enhancer 0% to 200% of the luminance signal (Can be set for the low/midrange/high frequency ranges)
    2D Filter Y and C = 16-level selector, image detail adaptive filter system
    3D Filter Y and C = 16-level selector, motion adaptive frame cyclic filter system
    Phase Control System horizontal phase = -512 clk - 511 clk, System vertical phase: -512 H - 511 H
    I/O Delay 7 frames (at 1080i); 12 frames (at 2-3 pull-down 1080/59.94i, 1080/60i); 10 frames (at other format)
    Audio inputs Embedded audio = Group x 2 (8 channels / 4 pairs)
    Audio outputs Embedded audio = Group x 2 (8 channels / 4 pairs)
    Audio sampling frequency/Quantization 48 kHz/24 bit, 20 bit
    Audio delay 5 - 500 ms (1 ms step)
    Interfaces Alarm output: D-sub 15-pin (female), 1 channel (Power, fan, and temperature alarm)
    RS-422/Remote D-sub 9-pin (female), 1 channel (shared RS-422/Remote)
    Temperature 10°C - 40°C
    Humidity 30% - 85% (no condensation)
    Power 100 VAC - 240 VAC ±10%, 50/60 Hz
    Consumption 203VA (201W) (at 100VAC), 207VA (195W) (at 200VAC)
    Dimensions 430 (W) x 132 (H) x 500 (D) mm EIA 3RU
    Weight Approx. 17.0 kg (with one power supply unit)
    Accessories Operation manual, AC cord, CD-R (install software), Control cable, Rack mount brackets


Quick Quote







Compare up to 3 items


FOR-A DRS-21HS-22HS-41HS-42HS HD/SD Routing Switcher
FOR-A
FOR-A DRS-21HS/DRS-22HS/DRS-41HS/DRS-42HS
HD/SD Routing Switcher

PREVIEW (rollover to view)

DESCRIPTION
    The FOR-A DRS 21HS/22HS/41HS/42HS are compact and inexpensive multi bit rate video routing switchers. The DRS21HS/22HS/41HS/42HS support HD/SD-SDI and DVB-ASI signal formats.

FEATURES
    143 Mbps - 270 Mbps and 1.485 Gbps or 1.485/1.001 Gbps bit-rate supported
    DVB-ASI signal format supported
    Automatic cable equalization, re-clock function
    Local control panel
    GPI control or RS-232C/422 communications control
    Tally output
    Switch over during blanking period possible when inputting reference signal (Cannot be used as a blanking switcher with DVB-ASI signal)
    EIA 1 U half rack size
SPECIFICATIONS
    Input Output: DRS-21HS = 2 : 1; DRS-22HS = 2 : 2; DRS-41HS = 4 : 1; DRS-42HS = 4 : 2
    Signal Input HD-SDI = 1.485 Gbps or 1.485/1.001 Gbps; SD-SDI = 143 Mbps to 270 Mbps; DVB-ASI = 75Ω BNC
    Cable Equalization HD-SDI = 0 m to 100 m (5C-FB or equivalent); SD-SDI = 0 m to 200 m (5C-2V or equivalent)
    Signal Output HD-SDI = 1.485 Gbps or 1.485/1.001 Gbps; SD-SDI = 143 Mbps to 270 Mbps; DVB-ASI = 75Ω; BNC
    Reference Input BB - NTSC = 0.429 Vp-p; BB - PAL = 0.45 Vp-p; 75Ω; BNC x 1 with loop-through (Terminate with 75Ω, if unused.)
    Interfaces REMOTE = 25-pin D-sub (female); GPI/O, RS-232C or RS-422 (internal selection)
    Temperature 10°C to 40°C
    Humidity 30% to 90% (no condensation)
    Power 100 V AC to 240 V AC ±10%, 50/60 Hz
    Consumption 100 V AC to 120 V AC = 20 VA (12 W); 220 V AC to 240 V AC = 26 VA (13 W)
    Dimensions 212 (W) x 44 (H) x 350 (D) mm
    Weight 2 kg
    Accessories Operation Manual, AC cord


Quick Quote







Compare up to 3 items


FOR-A DRS-21S-22S-41S-42S SD Routing Switcher
FOR-A
FOR-A DRS-21S/DRS-22S/DRS-41S/DRS-42S
SD Routing Switcher

PREVIEW (rollover to view)

DESCRIPTION
    The DRS 21S/22S/41S/42S are compact and inexpensive multi bit rate video routing switchers. The DRS21S/22S/41S/42S support HD/SD-SDI and DVB-ASI signal formats.

FEATURES
    143Mbps - 270Mbps and 1.485Gbps or 1.485/1.001Gbps format supported
    DVB-ASI signal format supported
    Automatic cable equalization, re-clock function
    Local control panel
    GPI control and RS-232C/422 communications control
    Tally output
    Switchover during blanking period possible when inputting reference signal (Cannot be used as a blanking switcher with DVB-ASI signal)
    EIA 1U half rack size
    SD only model also available
SPECIFICATIONS
    Input Output: DRS-21S = 2 : 1; DRS-22S = 2 : 2; DRS-41S = 4 : 1; DRS-42S = 4 : 2
    Signal Input SD-SDI = 143Mbps - 270Mbps; DVB-ASI = 75Ω, BNC
    Cable Equalization SD-SDI = 0m - 200m (when 5C-2V cable)
    Signal Output SD-SDI = 143Mbps - 270Mbps; DVB-ASI = 75Ω, BNC (depends on the input signal)
    Reference Input BB - NTSC = 0.429Vp-p; BB - PAL = 0.45Vp-p; 75Ω; or loopthrough, 1ea., BNC
    Interfaces REMOTE = 25pin D-sub (female); GPI/O, RS-232C or RS-422 (internal switch selection)
    Temperature 10°C - 40°C
    Humidity 30% - 90% (no condensation)
    Power 100VAC - 240VAC 10% ±50/60Hz
    Consumption 100VAC - 120VAC = 20VA (12W); 220VAC - 240VAC = 26VA (13W)
    Dimensions 212(W) x 44(H) x 350(D) mm
    Weight Approx. 2.0kg
    Accessories Operation Manual, AC cord


Quick Quote







Compare up to 3 items


FOR-A DSC-100 DigiStorm Controller
FOR-A
FOR-A DSC-100
DigiStorm Controller

PREVIEW (rollover to view)

DESCRIPTION
    The DSC-100 is a device for switching camera parameters in FOR-A's "digiStorm" virtual studio and RCG system. Normally, one CG processor is required for each camera for compositing with CG images. The DSC-100, however, enables switching of the input camera parameters for effectively using the CG processor.
FEATURES
    Built-in redundant power supply
SPECIFICATIONS
    Supports building of multi-camera sensor systems The camera parameters needed for CG compositing are changed at the stage before the CG processor for effectively using the CG processor when operating a multiple-camera virtual studio system and for eliminating the need for a CG processor for each camera.
    Two available lines for camera parameter output setting Separate camera settings can be made for each line for building an on-air/next system when two CG processors are used.
    8-port RS-422 interface This collects the various data needed for the virtual studio, including the camera sensors, for eliminating complicated data handling processes.
    Enables linked operation with the Digital Video Switcher HANABI series The DCS-100 operates in tandem with the switching settings of the video switcher for providing seamless compositing of the appropriate CG image on the camera video.
    Easy-to-operate, intuitive GUI Settings can be easily made on a PC.


Quick Quote







Compare up to 3 items


FOR-A DSC-200 DigiStorm Controller
FOR-A
FOR-A DSC-200
DigiStorm Controller

PREVIEW (rollover to view)

DESCRIPTION
    The DSC-200 is a device for switching camera parameters in FOR-A's "digiStorm" virtual studio and RCG system. Normally, one CG processor is required for each camera for compositing with CG images. The DSC-200, however, enables switching of the input camera parameters for effectively using the CG processor.
FEATURES
    Built-in redundant power supply
SPECIFICATIONS
    Supports building of multi-camera sensor systems The camera parameters needed for CG compositing are changed at the stage before the CG processor for effectively using the CG processor when operating a multiple-camera virtual studio system and for eliminating the need for a CG processor for each camera.
    Two available lines for camera parameter output setting Separate camera settings can be made for each line for building an on-air/next system when two CG processors are used.
    16-port RS-422 interface This collects the various data needed for the virtual studio, including the camera sensors, for eliminating complicated data handling processes.
    Enables linked operation with the Digital Video Switcher HANABI series The DCS-200 operates in tandem with the switching settings of the video switcher for providing seamless compositing of the appropriate CG image on the camera video.
    Easy-to-operate, intuitive GUI Settings can be easily made on a PC.


Quick Quote







Compare up to 3 items


FOR-A DSK-70HS HD/SD Digital Super Keyer
FOR-A
FOR-A DSK-70HS
HD/SD Digital Super Keyer

PREVIEW (rollover to view)

DESCRIPTION
    A lightweight, multi-rate digital super keyer, the DSK-70HS supports both HD and SD signals with one line and one title input.
FEATURES
    compatibility with a wide variety of systems
    compact and lightweight
    supports both HD and SD
    gen-lock functions

Quick Quote







Compare up to 3 items


FOR-A FA-115 Frame Synchronizer  26 TBC
FOR-A
FOR-A FA-115
Frame Synchronizer & TBC

PREVIEW (rollover to view)

DESCRIPTION
    The FOR-A FA 115 is a low cost Time Base Corrector / Frame Synchronizer with Noise Reducer and cable compensator. The FA115 is specifically designed for CATV, ITV and CCTV applications.
FEATURES
    Analog composite video input / output standard.
    Full frame memory to prevent picture field inversion during processing.
    Low cost and compact TBC / Synchronizer with noise reducer and cable compensator.
    Composite Input / Output for easy integration into current available system.
    Digital recursive motion adaptive noise reducer for improving the picture quality.
SPECIFICATIONS
    Internal 42:2 Component processing and Digital Encoder/Decoder ensure high quality and stable signal output.
    Video Format NTSC or PAL (Auto detect)
    Video Input Analog composite = 1.0 Vp-p, 75Ω BNC x 1
    Genlock Input BB - NTSC = 0.429 Vp-p; BB - PAL = 0.45 Vp-p, 75Ω BNC x 1, loop-through (Terminate with 75Ω terminator, if unused.)
    Video Output Analog composite = 1.0 Vp-p, 75Ω BNC x 2
    Signal Processing 4:2:2 component
    Correction Range 2 fields (field inversion prevented)
    Sampling Frequency Y = 13.5 MHz; C = 6.75 MHz
    Quantization 8-bit
    Frequency Response 100 kHz - 4.2 MHz = -0.5 dB - 0.5 dB, 4.2 MHz - 5.0 MHz = -1.0 dB - 1.0 dB, roll off above 5.0 MHz (NTSC); 100 kHz - 5.0 MHz = -0.5 dB - 0.5 dB, 5.0 MHz - 5.5 MHz = -1.0 dB - 1.0 dB, roll off above 5.5 MHz (PAL)
    S/N Ratio 56 dB (no quantization noise)
    DG/DP 2%
    K-Factor (2T Pulse) Less than 2%
    H/V Tilt Less than 1%
    Residual Jitter Y = ±15 ns, C = ±2°
    Proc Amp Video Level = -3 dB to 3 dB; Chroma Level = -3 dB to 3 dB; Setup Level = 0 IRE to 15 IRE; Chroma Phase = -30° to 30°
    Genlock Phase Control H Phase = -2 µs to 2 µs
    Interfaces Remote = BNC x 1 (Freeze control, make contact)
    Temperature 10°C to 40°C
    Humidity 30% to 90% (no condensation)
    Power 100 V AC to 240 V AC ±10%, 50/60 Hz
    Consumption 18 VA (10 W) at 100 V AC
    Dimensions 212 (W) x 44 (H) x 350 (D) mm
    Weight 2.5 kg
    Accessories Operation manual, AC cord


Quick Quote







Compare up to 3 items


FOR-A FA-125 Frame Synchronizer  26 TBC
FOR-A
FOR-A FA-125
Frame Synchronizer & TBC

PREVIEW (rollover to view)

DESCRIPTION
    The FOR-A FA 125 is a low cost Time Base Corrector / Frame Synchronizer. The FA125 corrects by up to one full frame the time base error/ phase shift problems that can occur during recording/playback of composite signals when using heterodyne process VTRs.
FEATURES
    Analog composite video input/output compatible. (Y/C is also supported.)
    Full frame memory to prevent picture field inversion during processing.
    10-bit digital decode / encode to ensure stable signals without bit dropout.
SPECIFICATIONS
    42:2 component internal signal processing.
    Video Format NTSC
    Video Input Analog composite = 1.0 Vp-p, 75Ω BNC x 1; Y/C Y = 1.0 Vp-p; C = 0.286 Vp-p; 75Ω 4-pin S-connector x 1
    Genlock Input BB = 0.429 Vp-p; 75Ω BNC x 1, loop-through (Terminate with 75Ω terminator, if unused.)
    Video Output Analog composite = 1.0 Vp-p, 75Ω BNC x 2; Y = 1.0 Vp-p; C = 0.286 Vp-p; 75Ω 4-pin S-connector x 1
    Signal Processing 4:2:2 component
    Correction Range 2 fields (field inversion prevented)
    Sampling Frequency Y = 13.5 MHz; C = 6.75 MHz
    Quantization 10-bit
    Frequency Response 100 kHz to 4.2 MHz = ±0.5 dB, 4.2 MHz to 5.0 MHz = -1.0 dB to 0 dB, roll off above 5.0 MHz
    S/N Ratio 56 dB (no quantization noise)
    DG/DP 2% / 2°
    K-Factor (2T Pulse) Less than 1%
    H/V Tilt Less than 1%
    Residual Jitter Y = ±15 ns; C = ±2°
    Process Control Video Level = -3 dB to 3 dB; Chroma Level = -3 dB to 3 dB; Setup Level = -15 IRE to 15 IRE; Chroma Phase = -30° to 30°
    Genlock Phase Control H Phase = -2 ?s to 2 ?s / SC Phase = -180° to 180°
    Temperature 10°C to 40°C
    Humidity 30% to 90% (no condensation)
    Power 100 V AC to 240 V AC ±10%, 50/60 Hz
    Consumption 29 VA (19 W) at 100 V AC, 37 VA (20 W) at 220 V AC
    Dimensions 212 (W) x 44 (H) x 350 (D) mm
    Weight 2.5 kg
    Accessories Operation manual, AC cord


Quick Quote







Compare up to 3 items


FOR-A FA-128 Frame Synchronizer  26 TBC
FOR-A
FOR-A FA-128
Frame Synchronizer & TBC

PREVIEW (rollover to view)

DESCRIPTION
    The FOR-A FA 128 is a frame synchronizer. The FA128 is the world's first 14-bit digital encoder/decoder is used to provide unparalleled image quality.
FEATURES
    World's first 14-bit internal processing frame synchronizer.
    Superior correction range and image quality.
    Analog composite 1 input and 4 outputs.
    NTSC/PAL automatic detection.
    Digital 3-line adaptive comb filter processing.
    Full frame memory to prevent picture field inversion during processing.
    Wide range genlock capability, almost any VHS signal can be genlocked.
    Process control functions. (video level, chroma level, setup level and chroma phase)
SPECIFICATIONS
    42:2 component internal signal processing.
    Video Format NTSC or PAL (Auto detect)
    Video Input Analog composite = 1.0 Vp-p, 75Ω BNC x 1
    Genlock Input BB - NTSC = 0.429 Vp-p; BB - PAL = 0.45 Vp-p; 75Ω or loop-through (internal selection), BNC x 1
    Video Output Analog composite = 1.0 Vp-p, 75Ω BNC x 4
    Signal Processing 4:2:2 component
    Correction Range 2 fields (field inversion prevented)
    Sampling Frequency Y = 13.5 MHz; C = 6.75 MHz
    Quantization 14-bit
    Frequency Response 100 kHz - 4.2 MHz = -0.5 dB - 0.5 dB, 4.2 MHz - 5.0 MHz = -1.0 dB - 1.0 dB, roll off above 5.0 MHz (NTSC); 100 kHz - 5.0 MHz = -0.5 dB - 0.5 dB, 5.0 MHz - 5.5 MHz = -1.0 dB - 1.0 dB, roll off above 5.5 MHz (PAL)
    S/N Ratio 60 dB
    DG / DP 1% / 1° (APL = 50%)
    K-Factor (2T Pulse) Less than 1%
    H/V Tilt Less than 1%
    Proc Amp Video Level = -3 dB to 3 dB; Chroma Level = -3 dB to 3 dB; Setup Level = -15 IRE to 15 IRE; Chroma Phase = -30° to 30°
    Genlock Phase Control H Phase = -2 µs to 2 µs; SC Phase = -180° to 180°; H Position = -2 µs to 2 µs; V Position = -128 line to 127 line
    Temperature 10°C to 40°C
    Humidity 30% to 90% (no condensation)
    Power 100 V AC to 240 V AC ±10%, 50/60 Hz
    Consumption 22 VA (13 W) at 100 V AC, 28 VA (14 W) at 220 V AC
    Dimensions 212 (W) x 44 (H) x 350 (D) mm
    Weight 2.5 kg
    Accessories Operation manual, AC cord


Quick Quote







Compare up to 3 items


FOR-A FA-145 Frame Synchronizer  26 TBC
FOR-A
FOR-A FA-145
Frame Synchronizer & TBC

PREVIEW (rollover to view)

DESCRIPTION
    The FOR-A FA 145 is a compact and very powerful TBC/FS. The FA145 is capable of analog composite to/from digital component conversion, and has wide range internal genlock capability, so that almost any VHS signal can be genlocked.
FEATURES
    Supreme composite to/from digital component converter.
    Line synchronizer mode (for minimal delay).
    SD-SDI ANC data signal pass through.
    SD-SDI signal EDH enable/disable.
    Monitoring analog composite output available.
SPECIFICATIONS
    10-bit 42:2 component system adopted for internal signal processing.
    Video Format 525/60 (NTSC) or 625/50 (PAL) (Auto detect)
    Video Input Analog composite = 1.0 Vp-p, 75Ω BNC x 1; Digital component = 270 Mbps, 75Ω, BNC x 1
    Genlock Input BB - NTSC = 0.429 Vp-p; BB - PAL = 0.45 Vp-p; 75Ω, BNC x 1
    Video Output Analog composite = 1.0 Vp-p, 75Ω, BNC x 1 (for monitoring); Digital component = 270 Mbps, 75Ω, BNC x 2
    Signal Processing 4:2:2 component
    Correction Range 2 fields (field inversion prevented)
    Sampling Frequency Y = 13.5 MHz; C = 6.75 MHz
    Quantization 10-bit
    Frequency Response 100 kHz - 4.2 MHz = -0.5 dB - 0.5 dB, 4.2 MHz - 5.0 MHz = -1.0 dB - 1.0 dB, roll off above 5.0 MHz (NTSC); 100 kHz - 5.0 MHz = -0.5 dB - 0.5 dB, 5.0 MHz - 5.5 MHz = -1.0 dB - 1.0 dB, roll off above 5.5 MHz (PAL)
    S/N Ratio 56 dB
    DG/DP 1.5% / 1.5° (APL = 50%)
    K-Factor (2T Pulse) Less than 1%
    H/V Tilt Less than 1%
    Proc Amp Video Level = -3 dB to 3 dB; Chroma Level = -3 dB to 3 dB; Setup Level = -15 IRE to 15 IRE; Chroma Phase = -30° to 30°
    Genlock Phase Control H phase = -2 µs to 2 µs
    Temperature / Humidity 10°C to 40°C / 30% to 90% (no condensation)
    Power 100 V AC to 240 V AC ±10%, 50/60 Hz
    Consumption 25 VA (16 W) at 100 V AC, 30 VA (16 W) at 220 V AC
    Dimensions / Weight 212 (W) x 44 (H) x 350 (D) mm / 2.5 kg
    Accessories Operation manual, AC cord


Quick Quote







Compare up to 3 items


FOR-A FA-147 SD/Analog Frame Synchronizer  26 TBC
FOR-A
FOR-A FA-147
SD/Analog Frame Synchronizer & TBC

PREVIEW (rollover to view)

DESCRIPTION
    The FOR-A FA 147 is a compact and very powerful TBC/FS. The FA147 is capable of analog composite to/from digital component conversion, and has wide range internal genlock capability, so that almost any VHS signal can be genlocked.
FEATURES
    SD-SDI or Analog composite input/output.
    Supreme composite to/from digital component converter.
    Line synchronizer mode (for minimal delay).
    SD-SDI ANC data signal pass through.
SPECIFICATIONS
    10-bit 42:2 component system adopted for internal signal processing.
    Video Format 525/60 (NTSC) or 625/50 (PAL) (Auto detect)
    Video Input Analog composite = 1.0 Vp-p, 75Ω BNC x 1; Digital component = 270 Mbps, 75Ω BNC x 1
    Genlock Input BB = 0.429 Vp-p (NTSC) / 0.45 Vp-p (PAL); 75Ω BNC x 1
    Video Output Analog composite = 1.0 Vp-p, 75Ω BNC x 2; Digital component = 270 Mbps, 75Ω BNC x 2
    Signal Processing 4:2:2 component
    Correction Range 2 fields (field inversion prevented)
    Sampling Frequency Y = 13.5 MHz, C = 6.75 MHz
    Quantization 10-bit
    Frequency Response 100 kHz - 4.2 MHz = -0.5 dB - 0.5 dB, 4.2 MHz - 5.0 MHz = -1.0 dB - 1.0 dB, roll off above 5.0 MHz (NTSC); 100 kHz - 5.0 MHz = -0.5 dB - 0.5 dB, 5.0 MHz - 5.5 MHz = -1.0 dB - 1.0 dB, roll off above 5.5 MHz (PAL)
    S/N Ratio 60 dB
    DG/DP 1% / 1° (APL = 50%)
    K-Factor (2T Pulse) Less than 1%
    H/V Tilt Less than 1%
    Proc Amp Video Level = -3 dB to 3 dB; Chroma Level = 3 dB to 3 dB; Setup Level = -15 IRE to 15 IRE; Chroma Phase = -30° to 30°
    Genlock Phase Control H Phase = -4 µs to 4 µs; SC Phase = -180° to 180°; V Phase = Max.-127 line to 127 line; H Position = -4 µs to 4 µs; V Position = Max. -127 line to 127 line
    Temperature 0°C to 40°C
    Humidity 30% to 90% (no condensation)
    Power 100 V AC to 240 V AC ±10%, 50/60 Hz
    Consumption 24 VA (13 W) at 100 V AC, 31 VA (15 W) at 220 V AC
    Dimensions 212 (W) x 44 (H) x 350 (D) mm
    Weight 2.5 kg
    Accessories Operation manual, AC cord


Quick Quote







Compare up to 3 items


FOR-A FA-350RU Remote Control Unit (for FA-350/360/370/395A)
FOR-A
FOR-A FA-350RU
Remote Control Unit (for FA-350/360/370/395A)

PREVIEW (rollover to view)

DESCRIPTION
    The FA-350RU provides convenient and reliable remote control of all units in FA-350 time base corrector / frame synchronizers series. (Series consists of FA-350/P, FA-360/P, FA-370/P and FA-395A/P)
FEATURES
    Controls any unit in FOR-A
    One RU can control up to 100 FA-350 series units in mixed model configurations.
    Perform same operations as at local panels from RU control panel (proc amp, freeze, etc.).
    RU allows user to make and memory save settings for up to 100 processing events.

Quick Quote







Compare up to 3 items


FOR-A FA-370 Frame Synchronizer  26 TBC
FOR-A
FOR-A FA-370
Frame Synchronizer & TBC

PREVIEW (rollover to view)

DESCRIPTION
    The FA-370/P provides high quality time base correction / frame synchronization performance. It corrects by up to one full frame the timebase error / phase shift problems.
FEATURES
    Multiple I/Os; analog composite/component serial digital.
    Recursive filtering of Y and C to minimize or eliminate signal noise.
    Full frame memory to prevent picture field inversion during processing.
    10-bit digital decoding used to ensure stable signals without bit dropout.
    Selectable control interface; RS-232C for PC control of operations, RS-422 for remote device control.
SPECIFICATIONS
    42:2 digital component internal signal processing.


Quick Quote







Compare up to 3 items


FOR-A FA-395A Frame Synchronizer  26 TBC
FOR-A
FOR-A FA-395A
Frame Synchronizer & TBC

PREVIEW (rollover to view)

DESCRIPTION
    The FA-395A/AP Time Base Corrector & Frame Synchronizer supports multi-format video input/output, as well, analog and digital audio input/output.
FEATURES
    Analog composite, analog component and digital component video input/output available.
    Analog audio and digital audio input/output available.
    Analog and digital audio embedding/de-embedding over video signal capability.
    RS-232C / RS-422 / GPI control capability.
    Built-in recursive noise reducer.
    Built-in color bar generator.

Quick Quote







Compare up to 3 items