 |
 |
|
Sennheiser products from AV Supply
Sennheiser is the acknowledged world
leader in microphone technology, RF-wireless and infrared sound transmission, headphone transducer technology,
and in the development of active noise-cancellation. Sennheiser distributes a
variety of other pro audio lines, including Neumann, HHB, and K+H. Our
commitment to the world of audio is simple: we offer products that provide the
finest combination of performance and value available anywhere, and back them up
with superlative service.
For more details on any of the NET-USA products shown
below, simply click on the product number. For further information and quantity
pricing, please call 1-800-284-2288 or
email us.
|
| MD421
II |
Cardioid
dynamic with five position bass rolloff switch, includes MZA421 lock-on
stand adapter (30.0oz) |
| MD431 II |
Handheld
supercardioid dynamic with on/off switch, includes MZA4031 clip (26.0 oz) |
| MD441-U |
Supercardioid
dynamic with low and high equalization switches, includes MZQ441 clip
(34.0 oz) |
| MD42 |
Handheld
omni dynamic for field ENG/EFP, MZQ800 clip not included (15.0 oz) |
| MD46 |
Handheld
cardioid dynamic for field ENG/EFP, MZQ800 clip not included (15.0 oz) |
| e 602 II |
Cardioid
dynamic for bass drum with stand mount (19.4 oz) |
| e604 |
Cardioid
dynamic with stand mount and MZH604 mount for drum rims and suspension
mounts (2.1 oz) |
| e608 |
Supercardioid
clip-on dynamic with flexible gooseneck for brass, wind instruments and
drums, includes MZQ608 clip (0.71 oz) |
| e609 Silver |
Supercardioid
dynamic for guitar amplifiers, includes MZQ100 clip (6.4 oz) |
| e614 |
Supercardioid
condenser for drum overheads, includes MZQ100 clip (6.5 oz) |
| e815S-C |
Handheld
cardioid dynamic with on/off switch and MZQ800 clip (11.6 oz) |
| e815S-X |
Handheld
cardioid dynamic with on/off switch and 21 ft XLR cable (11.6 oz) |
| e825S |
Handheld
cardioid dynamic with on/off switch and MZQ800 clip (11.6 oz) |
| e835 |
Handheld
cardioid dynamic with MZQ800 clip (11.6 oz) |
| e835S |
Handheld
cardioid dynamic with on/off switch and MZQ800 clip (11.6 oz) |
| e840 |
Handheld
cardioid dynamic, high gain before feedback, includes MZQ800 clip (11.6
oz) |
| e845 |
Handheld
supercardioid dynamic, includes MZQ800 clip (11.6 oz) |
| e845S |
Handheld
supercardioid dynamic with on/off switch, includes MZQ800 clip (11.6 oz) |
| e865 |
Handheld
supercardioid condenser, includes MZQ800 clip (11.6 oz) |
| e865S |
Handheld
supercardioid condenser with on/off switch, includes MZQ800 clip (11.6 oz) |
| e901 |
Professional
pre-polarized half cardioid boundary layer condenser for bass drum, piano
and low frequency instrument applications (1 lb 2.4 oz) |
| e902 |
Professional
cardioid dynamic with stand receiver for bass drum (15.9 oz) |
| e904 |
Professional
cardioid dynamic with stand receiver and MZH604 clip for drum rims and
suspension mounts (4.4 oz) |
| e905 |
Professional
cardioid dynamic with stand receiver for snare drum (7.3 oz) |
| e906 |
Professional
supercardioid dynamic with three-position presence filter, MZQ100 clip for
guitar cabinet (4.8 oz) |
| e908D |
Professional
cardioid condenser with flexible gooseneck for drums with MZH908D dual
mounting clip and MZA900P detachable preamp (4.8 oz) |
| e908B |
Professional
cardioid condenser with flexible gooseneck for wind instruments with
MZH908B quick release clip and MZA900P detachable preamp (4.0 oz) |
| e908B-ew |
Professional
cardioid condenser with flexible gooseneck for wind instruments with
MZH908B quick release clip and evolution wireless connector (2.9 oz) |
| e908T-ew |
Professional
cardioid condenser with flexible gooseneck, reduced sensitivity for brass,
includes MZH908B quick release clip and evolution wireless connector (2.9
oz) |
| e912
BK |
Pre-polarized
condenser boundary microphone with half-cardioid pick-up pattern, black |
| e912
WH |
Pre-polarized
condenser boundary microphone with half-cardioid pick-up pattern, white |
| e
912 S BK |
Pre-polarized
condenser boundary microphone, half-cardioid pick-up pattern, with
programmable switch (PTT, PTM, On/Off), black |
| e
912 S WH |
Pre-polarized
condenser boundary microphone, half-cardioid pick-up pattern, with
programmable switch (PTT, PTM, On/Off), white |
| e
912 S NX |
Pre-polarized
condenser boundary microphone, half-cardioid pick-up pattern, with
programmable switch (PTT, PTM, On/Off), non-reflective NextelŽ gray |
| e914 |
Professional
cardioid condenser with pre-attenuation and bass roll-off switches for
acoustic guitar, overheads, orchestras and grand pianos (6.8 oz) |
| e935 |
Professional
handheld cardioid dynamic with MZQ800 clip (11.6 oz) |
| e945 |
Professional
handheld supercardioid dynamic with MZQ800 clip (11.6 oz) |
| ePACK815S |
e815S
microphone, MZQ800 clip, SEMS3000 stand and CJ25 cable (8.9 lbs) |
| ePACK835 |
e835
microphone, MZQ800 clip, SEMS3000 stand and CJ25 cable (8.9 lbs) |
| KICKPACK II |
e602
II microphone, Kickstand and CJ25 cables (11.5 lbs) |
| THREEPACK815S |
(3)
e815S microphones with MZQ800 clips and carrying pouches (3.5 lbs) |
| THREEPACK835 |
(3)
e835 microphones with MZQ800 clips and carrying pouches (3.5 lbs) |
| THREEPACK604P |
(3)
e604 microphones with MZH604 clips and carrying pouches (3.1 lbs) |
| KICKSTAND |
Weighted
floor stand with boom arm (8.0 lbs) |
| SEMS3235 |
Instrument
microphone stand with boom arm, 15.5-24 in, collapsible (5.3 lbs) |
| SEMS3000 |
Floor
stand with boom arm (2.8 lbs) |
| CJ25 |
25
ft XLR microphone cable (9.0 oz) |
| MZW1 |
Foam
windscreen, fits all evolution wired and wireless handhelds, MD46 |
| MZW421 |
Foam
windscreen, fits MD421 II (2.0 oz) |
| MZW441 |
Foam
windscreen, fits MD441-U (2.0 oz) |
| MZW4032 |
Foam
windscreen, fits MD431 II and all evolution wired and wireless handhelds
(2.0 oz) |
| MZA216 |
Thread
adapter, metric male to 5/8 in female (2.0 oz) |
| MZA217 |
Brass
thread adapter, 5/8 in external to 3/8 in internal (1.0 oz) |
| MZA421 |
Lock-on
stand adapter, fits into slot on underside of MD421 (3.0 oz) |
| MZA441 |
Clear
plastic locking stand adapter for MD441 (6.0 oz) |
| MZA4031 |
Pliable
quick release stand adapter for MD431 II (6.0 oz) |
| MZH504 |
Angled
drum clamp for e604 and e904 (2.0 oz) |
| MZH604 |
L-shaped
drum clamp, fits e604 and e904 (2.0 oz) |
| MZJ504 |
Replacement
swivel joint for e604 and e904 (2.0 oz) |
| MZQ100 |
Quick
release microphone clip, fits e609 Silver, e614 and e906 |
| MZQ441 |
Flexible
stand adapter for MD441-U (4.0 oz) |
| MZQ608 |
Clip
for e608 |
| MZQ800 |
Universal
evolution handheld microphone clip |
| MZS421 |
Shock
mount for MD421 II |
| MZH908B |
Quick
release brass instrument clip for e908 and e608 (0.64 oz) |
| MZH908D |
Quick
release dual mic drum clamp for e908D and e608 (1.28 oz) |
| MZA900P |
P48
phantom power adapter for evolution wireless mini plug with dual color
smart LEDs, pre-attenuation switch (0/-12 dB) and switchable roll-off
filter (1.8 oz) |
| CASEMD421 |
Foam-lined
hard shell polymer case for MD421 II |
| CASEMD441 |
Foam-lined
hard shell polymer case for MD441-U |
| POUCHewSK |
Protective
short pouch for evolution wired microphones and evolution wireless
bodypacks |
| POUCHewSKM |
Protective
long pouch for MD46 and evolution wireless handheld transmitters |
| K6 |
Powering
module for K6 Series capsules, powered by either a single 1.5 Volt AA
(battery life 150 hours) or phantom power. On/off switch with LED
indicator and bass roll-off (4.0
oz) |
| K6P |
Phantom
power only version of K6, no on/off switch (4.0 oz) |
| K6RD |
Lower
sensitivity version of K6 for devices that have audio inputs (such as
camcorders) unable to handle high output of the K6 (4.0 oz) |
| K6PRD |
Phantom
power only version of K6RD, no on/off switch (4.0 oz) |
| ME62 |
Omnidirectional
capsule head for K6 Series (2.0 oz) |
| ME64 |
Cardioid
capsule head for K6 Series (2.0 oz) |
| ME65 |
Supercardioid
handheld capsule head for K6 Series (2.8 oz) |
| ME66 |
Short
shotgun capsule head for K6 Series (3.5 oz) |
| ME67 |
Long
shotgun capsule head for K6 Series (3.5 oz) |
| ME62/K6 Combo |
Omnidirectional
microphone system (phantom or battery power) |
| ME62/K6P Combo |
Omnidirectional
microphone system (phantom power only) |
| ME64/K6 Combo |
Cardioid
microphone system (phantom or battery power) |
| ME64/K6P Combo |
Cardioid
microphone system (phantom power only) |
| ME65/K6 Combo |
Supercardioid
microphone system (phantom or battery power) |
| ME65/K6P Combo |
Supercardioid
microphone system (phantom power only) |
| ME66/K6 Combo |
Shotgun
microphone system (phantom or battery power) |
| ME66/K6P Combo |
Shotgun
microphone system (phantom power only) |
| MZW64 |
Gray
foam windscreen for ME62, ME64 (1.0 oz) |
| MZW64PRO |
Black
velour windscreen for ME62, ME64 (1.0 oz) |
| MZW65PRO |
Black
velour windscreen for ME65 (1.0 oz) |
| MZW66 |
Gray
foam windscreen for ME66 (2.0 oz) |
| MZW66PRO |
Black
velour windscreen for ME66 (2.0 oz) |
| MZW67 |
Gray
foam windscreen for ME67 (2.0 oz) |
| MZW67PRO |
Black
velour windscreen for ME67 (2.0 oz) |
| MZQ200 |
Stand
adapter for K6 Series (3.0 oz) |
| MZQ6 |
Video
camera mount for K6 Series (3.0 oz) |
| MZS6 |
Shockmount
stand adapter for K6 Series (2.5oz) |
| MZS20-1 |
Combination
shockmount pistol grip and stand adapter for K6 Series, required for blimp
windscreen use. (15.5 oz) |
| MZS20-1/216 |
MZS20-1
kit with MZA216 thread adapter, 3/8 - 5/8 in (18.5 oz) |
| MZSCAM |
Elastic
suspension shockmount with shoe mount for camera use (4.0 oz) |
| MZC1 |
Shotgun
ceiling mount accessory for MKH and K6 shotguns |
| MZW20-1 |
Blimp
windscreen for ME62 and ME64 capsules, requires MZS20-1 pistol grip (12.5
oz) |
| MZH20-1 |
Long
hair wind muff for use with MZW20-1 blimp windscreen on ME62 and ME64
capsules (13 oz) |
| MZW60-1 |
Blimp
windscreen for ME66 capsule, requires MZS20-1 pistol grip (14.5 oz) |
| MZH60-1 |
Long
hair wind muff for use with MZW20-1 blimp windscreen on ME66 capsule (14
oz) |
| MZW70-1 |
Blimp
windscreen for ME67 capsule, requires MZS20-1 pistol grip (16.5 oz) |
| MZH70-1 |
Long
hair wind muff for use with MZW20-1 blimp windscreen on ME67 (16 oz) |
| KC6 |
Case
for all K6 Series components |
| K6C-SM |
Case
to hold one K6 Series Combo Kit |
| MKH20-P48 |
Omnidirectional
condenser in Matte Black finish with switchable -10 dB pad and
diffuse/near field high frequency switch (+6 dB @ 10 kHz), supplied with
MZQ40, MZS40, MZW41 (22.0 oz) |
| MKH30-P48 |
Bi-directional
(figure 8) condenser in Matte Black finish with switchable -10 dB pad and
switchable bass attenuation (-4 dB @ 50 Hz) supplied with MZQ31, MZS80,
MZW41 (24.0 oz) |
| MKH40-P48 |
Cardioid
condenser in Matte Black finish with switchable -10 dB pad and switchable
bass attenuation (-4 dB @ 50 Hz) supplied with MZQ40, MZS40, MZW41 (22.0
oz) |
| MKH50-P48 |
Supercardioid
condenser in Matte Black with -10 dB pad and switchable bass attenuation
(-4 dB @ 50 Hz) supplied with MZQ40, MZS40, MZW41 (23.0 oz) |
| MKH60-P48 |
Supercardioid/lobe
(short shotgun) condenser in Matte Black finish with switchable -10 dB
pad, switchable low cut filter (-5 dB @ 100 Hz) and high frequency boost
(+5 dB @ 10 Hz) supplied with MZQ40 (23.0 oz) |
| MKH70-P48 |
Supercardioid/lobe
(shotgun) condenser in Matte Black finish with switchable -10dB pad,
switchable high frequency boost (+5 dB @ 10 kHz) and low cut filter (-5 dB
@ 50 HZ) (23.0 oz) |
| MKH800-P48 |
Multi-pattern
condenser in Champagne finish with omni, wide cardioid, cardioid,
supercardioid, and figure 8 patterns, attenuation (-6 and -12 dB), treble
boost (+3 and +6 dB @ 10 kHz) and bass cut switches (-3 and -6 dB @ 50
Hz), integrated LED (facilitates exact orientation), frequency range
extending to 50 kHz, and accessory package of MZQ80, MZW80, MZS80 and
aluminum carry case (24.0 oz) |
| MKH416-P48U3 |
Supercardioid/lobe
(short shotgun) condenser in Matte Black finish, supplied with MZW415
windscreen, 48 volt phantom powering (6.0 oz) |
| MKH416-TU3 |
Supercardioid/lobe
condenser (short shotgun) condenser in Matte Black finish, supercardioid/lobe,
supplied with MZW415 windscreen, 12 volt AB powering (18.0 oz), |
| MKH418S |
Dual
capsule MS stereo condenser in Matte Black finish, dual 48 volt phantom
powering, requires AC418 Y-cable, not included (7.8
oz) |
| MZS415-3 |
Shock
mount for 19 mm (~3/4 in) diameter microphones (MKH416, MKH418S), requires
MZG415-3 swivel mount for most applications (5.0 oz) does not fit MKH800, |
| MZS20-1 |
Combination
shock mount, pistol grip and stand adapter for MKH20, 30, 40, 50, 60, 70,
MKH416 and K6 series, required for mounting in blimp windscreens (15.5 oz) |
| MZS20-1/216 |
MZS20-1
kit with MZA216 thread adapter, 3/8 - 5/8 in |
| MZS40 |
Elastic
suspension shock mount for MKH20, MKH40 and MKH50 (20.0 oz) |
| MZS80 |
Shock
mount for MKH80 and MKH30 (26.0 oz) |
| MZSCAM |
Elastic
suspension shockmount with shoe mount for camera use (9.4 oz) |
| MZW20-1 |
Blimp
windscreen for MKH20, MKH30, MKH40 and MKH50, requires MZS20-1 (12.5 oz), |
| MZH20-1 |
Long
hair wind muff for use with MZW20-1 (13.0 oz) |
| MZW41 |
Gray
foam windscreen for MKH20, MKH30, MKH40 and MKH50 (5.0 oz) |
| MZW60-1 |
Blimp
windscreen for MKH60, MKH416, K6 and ME66, requires MZS20-1 (14.5 oz) |
| MZH60-1 |
Long
hair wind muff for use with MZW60-1 (13.0 oz) |
| MZW61 |
Black
foam windscreen for MKH60 (2.0 oz) |
| MZW70-1 |
Blimp
windscreen for MKH70, requires MZS20-1 (20.0 oz) |
| MZH70-1 |
Long
hair wind muff for use with MZW70-1 (15.0 oz) |
| MZW71 |
Black
foam windscreen for MKH70 (3.5 oz) |
| MZW80 |
Black
foam windscreen for MKH800 (2.0 oz) |
| MZW415 |
Gray
foam windscreen for MKH416, MKH418S (2.0 oz) |
| MZC1 |
Shotgun
ceiling mount accessory for MKH20, MKH30, MKH40 and MKH50 |
| MZA14 P48U |
Battery
power supply, powers one 48 volt phantom powered microphone. Battery life
approximately 20 hours using a 9 volt alkaline battery. Battery test,
attenuation (0, -10, -20 dB) and low frequency rolloff (20, 80, 140 Hz)
controls (19.0 oz) |
| MZA14-TU |
Battery
power supply, powers one 12 volt AB (T-powered) microphone. Battery life
approximately 30 hours using a 9 volt alkaline battery. Battery test,
attenuation (0, -10, -20 dB) and low frequency rolloff (20, 80, 140 Hz)
controls (19.0 oz) |
| 12T-P48 |
Phantom
48 volt to 12 volt AB (T-power) adapter |
| MZA216 |
Thread
adapter, 3/8 in 16 external thread to 5/8 in 27 internal thread (1.0 oz) |
| MZA217 |
Brass
thread adapter 5/8 in external to 3/8 in internal (1.0 oz) |
| MZD30 |
Piggyback
microphone holder for any combination of two MKH20, MKH30, MKH40 or MKH50
(1.0 oz) |
| MZG415-3 |
Swivel
mount yoke for MZS shock mounts (6.0 oz) |
| MZQ40 |
Flexible
quick release stand adapter for MKH20, MKH40, MKH50 and MKH60 (6.0 oz) |
| MZQ100 |
Flexible
quick release stand adapter for 19-23 mm (approximately 3/4-7/8 in)
diameter microphones such as MKH416 (3.0 oz) |
| ACS5 |
5
pin XLR to dual 3 pin XLR adapter, 6 in. length for MKH418S and MKE44-P |
| AC418 |
5
pin XLR to dual 3 pin XLR cable, 3.25 ft for MKH418S and MKE44-P |
| CASESHORTMKH |
Foam-lined
hardshell polymer case for MKH20/30/40/50 |
| CASELONGMKH |
Foam-lined
hardshell polymer case for MKH416, MKH418S, MKH60, MKH70 |
| CASEMKH70 |
Wood
case for MKH70 |
| MKH8020 |
Omnidirectional
condenser in Nextel Black. Freq
response 10Hz to 60kHz |
| MKH8040 |
Cardioid
condenser in Nextel Black. Freq response 30Hz to 50kHz |
| MKH8050 |
Super-Cardioid
Condenser in nextel Black. Freq response 30Hz to 50kHz |
| MKH8020 STEREO SET |
Stereo
Pair of MKH 8020 |
| MKH8040 STEREO SET |
Stereo
Pair of MKH 8040 |
| MKHC8020 |
Omnidirectional
condenser mic. Capsule Only |
| MKHC8040 |
Cardioid
condenser mic, capsule only |
| MKHC8050 |
Super-Cardioid
condenser mic capsule only |
| MZX8000 |
XLR
module for MKHC capsules |
| MZW8000 |
Windshield,
dual layer design for efficent reduction of wind and pop noise |
| MZE8015 |
Extension
tube that carries audio signal from capsule, to XLR module. (15cm) |
| MZE8030 |
Extension
tube that carries audio signal from capsule, to XLR module. (30cm) |
| MZE8060 |
Extension
tube that carries audio signal from capsule, to XLR module. (60cm) |
| MZE8120 |
Extension
tube that carries audio signal from capsule, to XLR module. (120cm) |
| MZEF8030 |
Vertical
bar for floorstand (30cm) |
| MZEF8060 |
Vertical
bar for floorstand (60cm) |
| MZEF8120 |
Vertical
bar for floorstand (120cm) |
| MZFS8000 |
Heavy
design floor stand, insensitive to structure born noise. |
| MZGE8000 |
Bar
connector. Joins Vertical bar with extension tube |
| MZGE8002 |
Bar
connector that joins vertical bar with two extension tubes |
| MZG8000 |
Swivel
Joint, to be used in conjunction with MZS31, carries audio signal from
capsule to XLR module |
| MZL8003 |
Remote
cable carries audio signal from capsule to XLR module (3m) |
| MZL8010 |
Remote
cable carries audio signal from capsule to XLR module (10m) |
| MZQ8000 |
Standard
mic clip for MKH 8000 (19mm) |
| MZQ8001 |
Mini
clip for use with remote cable. 3/8"
standard threading |
| MZS8000 |
Shockmount
for MKH 8000 series |
| MZT8000 |
Classic
metal tablestand, sturdy and robust |
| MZT8001 |
Elegant
table stand with arylic base |
| MZH8000 |
Ceiling
mount with cable guide and adjustable alignment |
| MKE44P |
Stereo
condenser X-Y microphone with built in bass attenuator, supplied with
AC418 connecting cable and windscreen (27.0 oz) |
| MKE300 |
Compact
lightweight supercardioid condenser with suspension mount and S42177
windscreen (8.0 oz) |
| MZT441 |
V-shaped
table stand, fits any 3/8 in threaded microphone clamp (1.05 lbs) |
| MZT100 |
Heavy
duty round table stand with skid-resistant rubber base, fits any 3/8 in
threaded microphone clamp (3.15 lbs) |
| ACS5 |
5
pin XLR to dual 3 pin XLR adapter, 6 in. length for MKH418S and MKE44-P |
| S42177 |
Windscreen
for MKE300 |
| ME34 |
IS
Series cardioid condenser capsule head, includes windscreen (1.0 oz) |
| ME34 NX |
IS
Series cardioid condenser capsule head, includes windscreen,
non-reflective NextelŽ gray (1.0 oz) |
| ME35 |
IS
Series supercardioid condenser capsule head, includes windscreen (1.0 oz) |
| ME35 NX |
IS
Series supercardioid condenser capsule head, includes windscreen,
non-reflective NextelŽ gray (1.0 oz) |
| ME36 |
IS
Series lobar mini shotgun condenser capsule head, includes windscreen (2.0
oz) |
| ME36 NX |
IS
Series lobar mini shotgun condenser capsule head, includes windscreen,
non-reflective NextelŽ gray (2.0 oz) |
| MZH3015 |
IS
Series 6 in (15 cm) single flex gooseneck with 3 pin XLR connector (3.0
oz) |
| MZH3015 NX |
IS
Series 6 in (15 cm) single flex gooseneck with 3 pin XLR connector,
non-reflective NextelŽ gray (3.0 oz) |
| MZH3040 |
IS
Series 16 in (40 cm) single flex gooseneck with 3 pin XLR connector (5.0
oz) |
| MZH3040 NX |
IS
Series 16 in (40 cm) single flex gooseneck with 3 pin XLR connector,
non-reflective NextelŽ gray (5.0 oz) |
| MZH3042 |
IS
Series 16 in (40 cm) dual flex gooseneck with 3 pin XLR connector (5.0 oz) |
| MZH3042 NX |
IS
Series 16 in (40 cm) dual flex gooseneck with 3 pin XLR connector,
non-reflective NextelŽ gray (5.0 oz) |
| MZH3062 |
IS
Series 23 in (60 cm) dual flex gooseneck with 3 pin XLR connector (5.0 oz) |
| MZH3062 NX |
IS
Series 23 in (60 cm) dual flex gooseneck with 3 pin XLR connector,
non-reflective NextelŽ gray (5.0 oz) |
| MZH3072 |
IS
Series 27 in (70 cm) dual flex gooseneck with 3 pin XLR connector (5.0 oz) |
| MZH3072 NX |
IS
Series 27 in (70 cm) dual flex gooseneck with 3 pin XLR connector,
non-reflective NextelŽ gray (5.0 oz) |
| MZTX31 |
IS
Series table stand with 3 pin XLR connectors |
| MZTX31 NX |
IS
Series table stand with 3 pin XLR connectors, non-reflective NextelŽ gray |
| MZTX31PTT |
IS
Series table stand with push-to-talk button, 3 pin XLR connectors |
| MZTX31PTT NX |
IS
Series table stand with push-to-talk button, 3 pin XLR connectors,
non-reflective NextelŽ gray |
| MZFS30 |
IS Series pass
through wired floor stand, female XLR top, male XLR bottom, require
gooseneck, 11.8 in (30cm) |
| MZFS30
NX |
IS Series pass
through wired floor stand, female XLR top, male XLR bottom, require
gooseneck, non-reflective NextelŽ gray, 11.8 in (30cm) |
| MZFS60 |
IS Series pass
through wired floor stand, female XLR top, male XLR bottom, require
gooseneck, 23.6 in (60cm) |
| MZFS60
NX |
IS Series pass
through wired floor stand, female XLR top, male XLR bottom, require
gooseneck, non-reflective NextelŽ gray, 23.6 in (60cm) |
| MZFS80 |
IS Series pass
through wired floor stand, female XLR top, male XLR bottom, require
gooseneck, 31.5 in (80cm) |
| MZFS80
NX |
IS Series pass
through wired floor stand, female XLR top, male XLR bottom, require
gooseneck, non-reflective NextelŽ gray, 31.5 in (80cm) |
| MZH3015L |
IS
Series 6 in (15 cm) single flex lightring gooseneck with 5 pin XLR
connector (4.0 oz) |
| MZH3040L |
IS
Series 16 in (40 cm) single flex lightring gooseneck with 5 pin XLR
connector (6.0 oz) |
| MZH3042L |
IS
Series 16 in (40 cm) dual flex lightring gooseneck with 5 pin XLR
connector (6.0 oz) |
| MZTX30L |
IS
Series table stand with 5 pin XLR connectors, for use with lightring
goosenecks (24.0 oz) |
| MZW34 |
IS
Series upgrade velour windscreen for ME34 and ME35 |
| MZW36 |
IS
Series upgrade velour windscreen for ME36 |
| MZBD36 |
IS
Series boundary layer adapter for ME36, stainless steel (8.0 oz) |
| MZC30 |
IS
Series 1.1 mm Kevlar-reinforced cable spool (9m/29.5 ft) with integrated
pre-amp for hanging applications (3.0 oz) |
| MZH30 |
IS
Series ceiling hanger (0.5 oz) |
| MZS31 |
IS
Series suspension shock mount, for use with MZT30, requires 50mm diameter
hole (4.0 oz) |
| MZQ100 |
Microphone
clip, fits IS Series goosenecks, 3/8 in and 5/8 in threads (1.5 oz) |
| MZT30 |
IS
Series XLR female flange mount for fixed installation, requires 24.21 mm
diameter hole (1.5 oz) |
| IS MICS BASE KIT |
IS
Series microphone kit designed for portable use. Includes carrying case; ME34 cardiod, ME35 supercardiod and
ME36 lobar mini shotgun capsules; MZH3015, MZH3040 and MZH3042 goosenecks;
MZTX31 table and MZTX31 PTT table stand; MZT30 flange mount; MZS31 shock
mount; MZC30 connection cable; MZH30 ceiling mount; MZBD36 boundary
adapter; and MZQ100 clip. |
| i15-C |
ME34
cardiod capsule, MZH3015 gooseneck, MZT30 flange mount and MZS31 shock
mount |
| i15-S |
ME35
supercardiod capsule, MZH3015 gooseneck, MZT30 flange mount and MZS31
shock mount |
| i15-L |
ME36
lobar mini shotgun capsule, MZH3015 gooseneck, MZT30 flange mount and
MZS31 shock mount |
| i40-C |
ME34
cardiod capsule, MZH3040 gooseneck, MZT30 flange mount and MZS31 shock
mount |
| i40-S |
ME35
supercardiod capsule, MZH3040 gooseneck, MZT30 flange mount and MZS31
shock mount |
| i40-L |
ME36
lobar mini shotgun capsule, MZH3040 gooseneck, MZT30 flange mount and
MZS31 shock mount |
| i42-C |
ME34
cardiod capsule, MZH3042 gooseneck, MZT30 flange mount and MZS31 shock
mount |
| i42-S |
ME35
supercardiod capsule, MZH3042 gooseneck, MZT30 flange mount and MZS31
shock mount |
| i42-L |
ME36
lobar mini shotgun capsule, MZH3042 gooseneck, MZT30 flange mount and
MZS31 shock mount |
| i30H-C |
ME34
cardiod capsule, MZC30 cable and MZH30 ceiling hanger |
| i30H-S |
ME35
supercardiod capsule, MZC30 cable and MZH30 ceiling hanger |
| i30H-L |
ME36
lobar mini shotgun capsule, MZC30 cable and MZH30 ceiling hanger |
| i30B-L |
ME36
lobar mini shotgun capsule, MZBD36 boundary adapter and MZC30 cable |
| ew112G2 - A |
Bodypack
transmitter, ME2 omni lavalier and rack mountable receiver |
| ew112G2 - B |
Bodypack
transmitter, ME2 omni lavalier and rack mountable receiver |
| ew112G2 - C |
Bodypack
transmitter, ME2 omni lavalier and rack mountable receiver |
| ew122G2 - A |
Bodypack
transmitter with ME4 cardioid lavalier and rack mountable receiver |
| ew122G2 - B |
Bodypack
transmitter with ME4 cardioid lavalier and rack mountable receiver |
| ew122G2 - C |
Bodypack
transmitter with ME4 cardioid lavalier and rack mountable receiver |
| ew135G2 - A |
Handheld
transmitter with MD835 cardioid dynamic capsule and rack mountable
receiver |
| ew135G2 - B |
Handheld
transmitter with MD835 cardioid dynamic capsule and rack mountable
receiver |
| ew135G2 - C |
Handheld
transmitter with MD835 cardioid dynamic capsule and rack mountable
receiver |
| ew145G2 - A |
Handheld
transmitter with MD845 dynamic supercardioid capsule and rack mountable
receiver |
| ew145G2 - B |
Handheld
transmitter with MD845 dynamic supercardioid capsule and rack mountable
receiver |
| ew145G2 - C |
Handheld
transmitter with MD845 dynamic supercardioid capsule and rack mountable
receiver |
| ew152G2 - A |
Bodypack
transmitter with ME3 headworn microphone and rack mountable receiver |
| ew152G2 - B |
Bodypack
transmitter with ME3 headworn microphone and rack mountable receiver |
| ew152G2 - C |
Bodypack
transmitter with ME3 headworn microphone and rack mountable receiver |
| ew165G2 - A |
Handheld
transmitter with ME865 condenser supercardioid capsule and rack mountable
receiver |
| ew165G2 - B |
Handheld
transmitter with ME865 condenser supercardioid capsule and rack mountable
receiver |
| ew165G2 - C |
Handheld
transmitter with ME865 condenser supercardioid capsule and rack mountable
receiver |
| ew172G2 - A |
Bodypack
transmitter with Ci1 instrument cable and rack mountable receiver |
| ew172G2
- B |
Bodypack
transmitter with Ci1 instrument cable and rack mountable receiver |
| ew172G2 - C |
Bodypack
transmitter with Ci1 instrument cable and rack mountable receiver |
| ew100ENGG2 - A |
SK100G2,
SKP100G2, EK100G2, ME2 Omni lavalier, CL1 audio output cable, CL100 audio
output cable and CA2 shoe-mount adapter |
| ew100ENGG2 - B |
SK100G2,
SKP100G2, EK100G2, ME2 Omni lavalier, CL1 audio output cable, CL100 audio
output cable and CA2 shoe-mount adapter |
| ew100ENGG2 - C |
SK100G2,
SKP100G2, EK100G2, ME2 Omni lavalier, CL1 audio output cable, CL100 audio
output cable and CA2 shoe-mount adapter |
| ew112PG2 - A |
Bodypack
transmitter with ME2 omni lavalier and portable receiver, CL1 audio output
cable, CL100 audio output cable and CA2 shoe-mount adapter |
| ew112PG2 - B |
Bodypack
transmitter with ME2 omni lavalier and portable receiver, CL1 audio output
cable, CL100 audio output cable and CA2 shoe-mount adapter |
| ew112PG2 - C |
Bodypack
transmitter with ME2 omni lavalier and portable receiver, CL1 audio output
cable, CL100 audio output cable and CA2 shoe-mount adapter |
| ew122PG2 - A |
Bodypack
transmitter with ME4 cardioid lavalier and portable receiver, CL1 audio
output cable, CL100 audio output cable and CA2 shoe-mount adapter |
| ew122PG2 - B |
Bodypack
transmitter with ME4 cardioid lavalier and portable receiver, CL1 audio
output cable, CL100 audio output cable and CA2 shoe-mount adapter |
| ew122PG2 - C |
Bodypack
transmitter with ME4 cardioid lavalier and portable receiver, CL1 audio
output cable, CL100 audio output cable and CA2 shoe-mount adapter |
| ew135PG2 - A |
Handheld
transmitter with MD835 cardioid dynamic capsule and portable receiver, CL1
audio output cable, CL100 audio output cable and CA2 shoe-mount adapter |
| ew135PG2 - B |
Handheld
transmitter with MD835 cardioid dynamic capsule and portable receiver, CL1
audio output cable, CL100 audio output cable and CA2 shoe-mount adapter |
| ew135PG2 - C |
Handheld
transmitter with MD835 cardioid dynamic capsule and portable receiver, CL1
audio output cable, CL100 audio output cable and CA2 shoe-mount adapter |
| EK100G2 - A |
Portable
(camera-mountable) receiver |
| EK100G2 - B |
Portable
(camera-mountable) receiver |
| EK100G2 - C |
Portable
(camera-mountable) receiver |
| EM100G2 - A |
Rack-mountable
receiver, 1/2RU, requires NTEW-120 power supply (not included) |
| EM100G2 - B |
Rack-mountable
receiver, 1/2RU, requires NTEW-120 power supply (not included) |
| EM100G2 - C |
Rack-mountable
receiver, 1/2RU, requires NTEW-120 power supply (not included) |
| EM100G2/NT - A |
Rack-mountable
receiver, 1/2RU with NTEW-120 power supply |
| EM100G2/NT - B |
Rack-mountable
receiver, 1/2RU with NTEW-120 power supply |
| EM100G2/NT - C |
Rack-mountable
receiver, 1/2RU with NTEW-120 power supply |
| SK100G2 - A |
Bodypack
transmitter |
| SK100G2 - B |
Bodypack
transmitter |
| SK100G2 - C |
Bodypack
transmitter |
| SKM135G2 - A |
Handheld
transmitter with MD835 cardioid dynamic capsule |
| SKM135G2 - B |
Handheld
transmitter with MD835 cardioid dynamic capsule |
| SKM135G2 - C |
Handheld
transmitter with MD835 cardioid dynamic capsule |
| SKM145G2 - A |
Handheld
transmitter with MD845 supercardioid dynamic capsule |
| SKM145G2 - B |
Handheld
transmitter with MD845 supercardioid dynamic capsule |
| SKM145G2 - C |
Handheld
transmitter with MD845 supercardioid dynamic capsule |
| SKM165G2 - A |
Handheld
transmitter with ME865 supercardioid condenser capsule |
| SKM165G2 - B |
Handheld
transmitter with ME865 supercardioid condenser capsule |
| SKM165G2 - C |
Handheld
transmitter with ME865 supercardioid condenser capsule |
| SKP100G2 - A |
Plug-on
transmitter; for low impedance dynamic microphones only |
| SKP100G2 - B |
Plug-on
transmitter; for low impedance dynamic microphones only |
| SKP100G2 - C |
Plug-on
transmitter; for low impedance dynamic microphones only |
| ew312G2 - A |
Bodypack
transmitter with ME2 omni lavalier and rack mountable receiver with GA2
rack mount kit |
| ew312G2 - B |
Bodypack
transmitter with ME2 omni lavalier and rack mountable receiver with GA2
rack mount kit |
| ew312G2 - C |
Bodypack
transmitter with ME2 omni lavalier and rack mountable receiver with GA2
rack mount kit |
| ew322G2 - A |
Bodypack
transmitter with ME4 cardioid lavalier and rack mountable receiver with
GA2 rack mount kit |
| ew322G2 - B |
Bodypack
transmitter with ME4 cardioid lavalier and rack mountable receiver with
GA2 rack mount kit |
| ew322G2 - C |
Bodypack
transmitter with ME4 cardioid lavalier and rack mountable receiver with
GA2 rack mount kit |
| ew335G2 - A |
Handheld
transmitter with MD835 cardioid dynamic capsule and rack mountable
receiver with GA2 rack mount kit |
| ew335G2 - B |
Handheld
transmitter with MD835 cardioid dynamic capsule and rack mountable
receiver with GA2 rack mount kit |
| ew335G2 - C |
Handheld
transmitter with MD835 cardioid dynamic capsule and rack mountable
receiver with GA2 rack mount kit |
| ew345G2 - A |
Handheld
transmitter with MD845 supercardioid dynamic capsule and rack mountable
receiver with GA2 rack mount kit |
| ew345G2 - B |
Handheld
transmitter with MD845 supercardioid dynamic capsule and rack mountable
receiver with GA2 rack mount kit |
| ew345G2 - C |
Handheld
transmitter with MD845 supercardioid dynamic capsule and rack mountable
receiver with GA2 rack mount kit |
| ew352G2 - A |
Bodypack
transmitter with ME3 headworn microphone and rack mountable receiver with
GA2 rack mount kit |
| ew352G2 - B |
Bodypack
transmitter with ME3 headworn microphone and rack mountable receiver with
GA2 rack mount kit |
| ew352G2 - C |
Bodypack
transmitter with ME3 headworn microphone and rack mountable receiver with
GA2 rack mount kit |
| ew365G2 - A |
Handheld
transmitter with ME865 supercardioid condenser capsule and rack mountable
receiver with GA2 rack mount kit |
| ew365G2 - B |
Handheld
transmitter with ME865 supercardioid condenser capsule and rack mountable
receiver with GA2 rack mount kit |
| ew365G2 - C |
Handheld
transmitter with ME865 supercardioid condenser capsule and rack mountable
receiver with GA2 rack mount kit |
| ew372G2 - A |
Bodypack
transmitter with Ci1 instrument cable and rack mountable receiver with GA2
rack mount kit |
| ew372G2 - B |
Bodypack
transmitter with Ci1 instrument cable and rack mountable receiver with GA2
rack mount kit |
| ew372G2 - C |
Bodypack
transmitter with Ci1 instrument cable and rack mountable receiver with GA2
rack mount kit |
| EK300IEMG2 - A |
Bodypack
monitor receiver with IE4 ear buds |
| EK300IEMG2 - B |
Bodypack
monitor receiver with IE4 ear buds |
| EK300IEMG2 - C |
Bodypack
monitor receiver with IE4 ear buds |
| ew300IEMG2 - A |
Wireless
Monitor System with rack-mountable transmitter, GA2 rack mount kit,
bodypack receiver and IE4 ear buds |
| ew300IEMG2 - B |
Wireless
Monitor System with rack-mountable transmitter, GA2 rack mount kit,
bodypack receiver and IE4 ear buds |
| ew300IEMG2 - C |
Wireless
Monitor System with rack-mountable transmitter, GA2 rack mount kit,
bodypack receiver and IE4 ear buds |
| SR300G2 - A |
Rack-mountable
Wireless Monitor System transmitter, 1/2RU, requires NTEW-120 power supply
(not included) |
| SR300G2 - B |
Rack-mountable
Wireless Monitor System transmitter, 1/2RU, requires NTEW-120 power supply
(not included) |
|
