2.01 Megapixel Raw Data Output Mini Camera Link Industrial Camera

The Hitachi KPFR230SCL is CameraLink output system progressive scan RAW data output color CCD camera with a 1/1.8-inch size CCD which adopted the RGB primary color filter and a full fame shutter. The image of 1628 (H) x 1236 (V) is output in RAW data at 30 frames per second. The square format picture elements provide suitability for image processing applications.

The Hitachi KP FR230SCL 1/1.8-inch 2,000,000 pixels square lattice progressive scan CCD and the RGB primary color mosaic filter achieve a high resolution and high color fidelity of 1628 (H) x 1236 (V) (UXGA) and high speed at 30 frames per second. The camera has small SDR connector for digital outputs. Therefore, the camera has the realization of small-sized shape of 29 (W) x 29 (H) x 38 (D) mm. Power supply is input from DCIN connector.

Imaging device	1/1.8-inch interline CCD
Total pixels	1688 (H)x1248 (V)
Effective pixels	1628 (H)x1236 (V)
Pixel size	4.4 µm (H)x4.4 µm (V)(square lattice)
Color filter	RGB primary color mosaic filter
Sensing area	7.16 mm (H)x5.44 mm (V)
Scanning system	Progressive
Aspect ratio	4 : 3
Frame rate	30 frames per second (full pixel readout)
Horizontal drive frequency	72.0000 MHz
Horizontal scanning frequency	37.5 kHz
Vertical scanning frequency	29.95 Hz
Sync system	Internal
Lens mount	C mount (Flange focal distance = 17.526 mm)
Video output	Digital output (CameraLink) Base configuration: 36.0000 MHz x 2 TAP (Note: maximum cable length is 10m) Output image size: 1628(H)x1236(V) (full pixel readout)
Resolution	Horizontal / Vertical: 1200 TV lines
Sensitivity	2000 lx, F5.6, 3200 K
Minimum illumination	20 lx (F1.4, MAX GAIN)
Signal noise to ratio	45 dB
Electric shutter	OFF, 1/30, 1/60, 1/125, 1/250, 1/1000, 1/2000, 1/10000, 1/50000 second; OFF is normal exposure (frame rate) or changeable by variable shutter (minimum 1/100000 second)
Gamma	γ = 1
Frame on demand	Mode: (A) Fixed shutter mode (8 steps or variable); (B) ONE trigger mode
Trigger input	CameraLink (CC1) *When Reset control mode CC1 and CC2 are used
Partial scan	Selectable start position and height of picture grabbing in 1H step.
Power supply voltage	12 ± 1 VDC
Current consumption	Approx. 270 mA (approx. 3.2 W)
*MAX partial scan 1H	Approx. 360 mA (approx. 4.3W)
Ambient temperature	Performance: 0 to 40 °C ( 32 to 104 °F), less than 90 % RH (without dew condensation)
Operation	10 to 50 °C ( 14 to 122 °F), less than 90 % RH (without dew condensation)
Storage	-20 to 60 °C (-4 to 140 °F), less than 70 % RH (without dew condensation)
Vibration endurance	98 m/s2 (Acceleration: constant) 10 to 200 Hz, sweep: 10 minutes, XYZ 30 minutes
Shock endurance	686 m/s2 (Drop test, once each top, bottom, left and right)
External dimensions	29 (W)x29 (W)x38 (D) mm (Not including protrusions)
Mass	Approx. 50 g