|
(discontinued)1/2" Monochrome Progressive Scan Camera With EIA And VGA
|
|
|
By: JAI
CCD & CMOS Cameras
|
This product has been discontinued. For a replacement, please contact sales.
The JAI CV-M10SX E is the successor of the popular CV-M10BX E and CV-M10RS E cameras with a resolution compatible with the SVGA format.
The CV M10SX E camera is a 1/2" progressive scan camera that offers a superb image quality in versatile applications such as machine vision, high speed video capturing, pattern recognition, etc.
All CVM10SX E camera settings are done via an RS 232C interface or by DIP switches on the rear panel.
→ 1/2" progressive scan monochrome EIA (VGA) camera
→ Successor of the popular CV-M10BX/RS series
→ Improved sensitivity and smear performance
→ 782 (h) x 582 (v) square pixels for CCIR (SVGA) version
→ 659 (h) x 494 (v) square pixels for EIA (VGA) version
→ Single channel video output
→ Extremely short shutter speed, down to 1/917 000 sec. for CCIR (SVGA)
→ Internal, external HD/VD or random trigger synchronization
→ Edge pre-select (EPS) and pulse width control (PWC) trigger modes
→ Frame-delay readout
→ H reset and H non-reset trigger
→ Long time integration modes
→ WEN and Pixel clock output for easy interfacing
→ Setup by Windows 98/NT/2000 setup software via RS-232C
| Scanning system |
Progressive scan |
| CCD sensor |
Monochrome 1/2" IT CCD |
| Sensing area |
6.61 (h) x 4.97 (v) mm |
| Frame rate (progressive) (CV-M10 SX EIA) |
29.97 frames/sec. (525 lines/frame) |
| Line frequency (CV-M10 SX EIA) |
15.734 kHz |
| Pixel frequency (CV-M10 SX EIA) |
12.2727 MHz |
| Effective Pixels (CV-M10 SX EIA) |
659 (h) x 494 (v) |
| Pixels in video output (CV-M10 SX EIA) |
648 (h) x 486 (v) |
| Cell size |
(CV-M10 SX EIA) 9.9 (h) x 9.9 (v) μm |
| Sensitivity on sensor |
0.05 Lux, Max gain, 50% video |
| S/N ratio |
>56 dB (AGC off, Gamma 1) |
| Video output |
Composite 1.0 Vpp, 75 Ω |
| Gamma |
0.45 or 1.0 |
| Gain |
Manual - automatic |
| Gain range |
0 to 15 dB |
| Synchronization |
Int. X-tal., Ext HD/VD or random trigger |
| Scanning |
Progressive |
| HD/VD input |
4V, TTL or 75 Ω terminated |
| HD/VD output |
4V from 75 Ω source |
| Trigger input |
4V, TTL or 75 Ω terminated |
| EEN and WEN output |
4V from 75 Ω source |
| Pixel clock output |
4V from 75 Ω source |
| Trigger modes |
Continuous, Edge pre-select (EPS), Pulse width control (PWC) |
| Trigger |
HD synchronous or H reset |
| Shutter (EPS mode) |
EIA: 16 steps 1/30 to 1/800,000 |
| Shutter (PWC mode) |
1 H to 625 H |
| Long time exposure |
8 steps, 2 to 16 fiels |
| Functions controlled by RS-232C |
Shutter, Trigger, Black level, Gain AGC level, White clip |
| Camera rear panel controls |
Shutter, Trigger, Scan, Gamma, Gain |
| Vibration |
10 G (20 to 200 Hz in XYZ) |
| Shock |
70 G |
| Regulations |
CE (EN50081-1, EN50082-1), FCC part 15 |
| Operating temperature |
-5°C to 45°C |
| Humidity |
20 - 80% non-condensing |
| Power |
12V DC ±10%. 5 W |
| Lens mount |
C-mount |
| Dimensions |
40 x 50 x 80 mm (HxWxD) |
| Weight |
245 g |
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.
