Compact 1/2" Monochrome Progressive Scan Camera

Contact us for lowest price (800) 284-2288, (858) 565-1101, [email protected]

The JAI CV-A1 megapixel camera has a resolution of 1380 x 1035 and footprint of merely 44 x 66 mm (width x length) and height of 29 mm.  The CV A1 boasts a long list of new functions and features, including RS 232C control of all settings of the camera and a number of new trigger modes and readout modes.

The target market for the CVA1 camera family is volume OEMs (Original Equipment Manufacturers) and high level System Integrators for Automated Imaging applications (e.g. industrial/medical equipment).  A special UV enhanced, CV-A1 UV, as well as a slower scan version, CV-A1-20, is also available.

→ Compact 1/2" monochrome progressive scan camera
→ 1392 (h) x 1040 (v) 4.65 μm square pixels
→ 16 frames/second with full resolution in continuous operation
→ Increased frame rate with vertical binning and partial scan
→ Increased sensitivity with H and V binning
→ Exposure time from 75.9μs μs to 116 ms using Pulse Width Control mode
→ Programmable exposure from 75.9 μs to 59.8 ms
→ Frame-delay readout mode for multiplexed readout of up to 3 cameras
→ Internal, external HD/VD or random trigger synchronization
→ Smear reduction readout mode
→ LVAL-synchronous/-asynchronous operation (auto-detect)
→ Exposure enable (EEN), Write enable (WEN) and Pixel Clock output
→ Setup by Windows NT/2000/XP via serial communication

Sensor 1/2" progressive scan
Pixel Clock 28.64 MHz
Frame rate full frame 16.037 frames/second (1068 lines per frame)
Active area 6.4 (h) x 4.8 (v) mm
Cell size 4.65 x 4.65 pixels
Active pixels 1380 x 1035
Read-out modes, Full 1380 (h) x 1035 (v) 16 fps
Read-out modes, 1/2 partial scan 1380 (h) x 513(v) 30 fps
Read-out modes, 1/3 partial scan 1380 (h) x 341 (v) 43 fps
Read-out modes, 1/6 partial scan 1380 (h) x 171 (v) 75 fps
Read-out modes, Horizontal binning 690 (h) x 1035 (v) 16 fps
Read-out modes, Vertical binning 1380 (h) x 527 (v) 32 fps
Read-out modes, H V binning 690 (h) x 527 (v) 32 fps
Read-out modes, Smear-less Smear reduction
Read-out modes, Frame-delay readout For multi-camera read-out
Sensitivity (CV-A1) 0.3 Lux (On sensor, max. gain, shutter off, 50% video)
S/N ratio >50dB (0dB gain)
Video output Composite VS signal, 1Vp-p, 75 Ω Video signal, 0,7Vp-p (selectable)
Gain Manual, -3 to 12 dB Automatic, 0 to 12dB
Synchronization Int. X-tal, Ext. HD/VD or random trigger
Inputs, Trigger 4V, TTL
Inputs, HD/VD sync 4V, 75 Ω or High Z (switchable)
Outputs, HD / VD sync. 4V, 75 Ω
Outputs, WEN (Write Enable) 4V, 75 Ω
Outputs, EEN (Exposure Enable) 4V, 75 Ω
Outputs, Pixel clock 4V, 75 Ω
Trigger modes Continuous, EPS (Edge Pre-Select), PWC (Pulse Width Control), Long time exposure, Smear reduction and Frame-delay readout
Electronic shutter, Pre-set shutter 1/16 to 1/200,000 in 16 steps
Electronic shutter, Programmable exposure (PE) 1.3H to 1000H (75.9 μs to 59.8 ms)
Electronic shutter, Pulse Width 1.3H to 2000H (75.9μs μs to 116 ms)
Electronic shutter, Long time exposure 2 frames to 8
Accumulation HD synchronous or HD asynchronous
Control interface RS-232C, short ASCII commands
Functions controlled by RS-232C Scanning format, Trigger modes, Readout modes, Programmable exposure, Shutter, Gain, Pixel clock output, Sync on/off, Black level, Manual gain, AGC, Gamma
Functions controlled by internal DIP-switches VD input/output, HD input/output, HD/VD 75 Ω termination on/off
Operating Temperature -5 degree C to 45 degree C
Humidity (operation) 20 - 90% non-condensing
Storage temp./humidity -25 degree C to 60 degree C / 20 to 90%
Vibration 10G (20Hz to 200 Hz XYZ)
Shock 70G
Regulations CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE
Power 12V DC /-10%. 1.8W
Lens mount C-mount
Dimensions (H x W x L) 29 x 44 x 66 mm
Weight 150 g



facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.