Call Now: 1-800-284-2288 |
(discontinued)4/3" Monochrome Progressive Scan CCD 8-Megapixel Industrial Camera |
|
This product has been discontinued. For an alternative solution, please contact sales.
The JAI AM-800CL is an 8-megapixel industrial grade CCD camera offering a combination of high resolution, high fidelity, and high frame rates. The AM 800CL features the KAI-08050 quad-tap sensor from Kodak, capable of providing full 3296 x 2472 monochrome resolution at 17 fps. A standard Camera Link digital interface supports 8-bit, 10-bit, or 12-bit output.
The AM800CL uses the Kodak CCDs quad-tap architecture for rapid image acquisition, then combines the four taps into two for monochrome readout over a simple one-cable Camera Link base configuration. Built-in channel balancing capabilities are provided to ensure uniformity across the image.
The JAI AM-800CL camera features user configurable AOI scanning (partial scanning), horizontal and vertical binning modes , and a variety of acquisition modes, including continuous, single-frame, and multi-frame capture. Advanced image pre-processing features range from auto-gain, auto-shutter, and pixel blemish compensation, to flat-field compensation, and a 256-point look-up table for gamma customization.
Like JAIs other high resolution cameras, the AM 800CL incorporates a list of industrial grade features to maximize performance in machine vision environments. These include precise sensor alignment, advanced thermal management, a built-in temperature sensor, and rugged construction with extensive shock and vibration testing performed.
The JAI AM-800CL camera can be ordered with either C-mount or F-mount lens mounts. Dimensions depend on the configuration.
→ 8-megapixel 4/3-type progressive scan CCD
→ 3296 (h) x 2472 (v) pixel resolution
→ 5.5 micro m x 5.5 micro m square pixels
→ 17 fps at full resolution (8.5 fps for RGB output)
→ Programmable exposure to 1/100,000 sec. (10 micro s)
→ Auto shutter and auto iris control
→ Manual or auto gain control from -3 dB to 24 dB (0 to 24 dB for color)
→ User programmable partial scanning
→ Vertical and horizontal binning (monochrome only)
→ 256-point look-up table (LUT) for gamma control
→ Pixel blemish and flat-field compensation
→ Camera Link interface with 8, 10, or 12-bit monochrome/Bayer output or 8-bit RGB
→ Supports F-mount or C-mount lenses
Sensor | 4/3 progressive scan CCD (KAI-08050) |
Pixel Clock | 40 MHz |
Frame rate, full frame | 17 frames/sec. |
Active area | 18.13 mm (h) x 13. 60 mm (v), 22.66 mm diagonal |
Cell size | 5.5 micro m (h) x 5.5 micro m (v) |
Active pixels | 3296 (h) x 2472 (v) |
Read-out modes, Full | 3296 (h) x 2472 (v) 17 fps |
Read-out modes, In-camera interpolation | 3296 (h) x 2472 (v) 8.5 fps (AB-800CL) |
Read-out modes, Variable partial scan | Any start line, any height, in 1L steps |
Read-out modes, Variable partial scan (RGB) | Any start line, any height, in 2L steps |
Read-out modes, Binning (HxV) | 1 x 2, 2 x 1, 2 x 2 (monochrome only) |
Sensitivity (AM-800CL) | 0.04 Lux (On sensor, max. gain, f1.4, 50% video, 3200K, IR Cut CM500S) |
Sensitivity (AB-800CL) | 0.06 Lux (On sensor, max. gain, f1.4, 50% green, 4600K) |
S/N ratio | >57 dB. (0 dB gain) |
Video signal output (80 MHz data clock) | Camera Link 8-bit/10-bit/12-bit (monochrome, Bayer), Camera Link 8-bit (RGB) |
Auto-iris lens video | 0.7Vp-p, with 0.3V horiz. sync |
Gain Monochrome | Manual/automatic -3 dB to 24 dB |
Gain Color | Manual/automatic 0 dB to 24 dB |
White balance (AB-800CL) | Manual or one-push auto (3200K to 9000K) |
Gamma | 0.45 to 1.0 or 256-point LUT |
Synchronization | Internal |
Inputs | Camera Link, TTL/75 ohm |
Outputs, Camera Link | LVAL, FVAL, DVAL, EEN |
Outputs, TTL (Hirose 12-pin) | XEEN |
Acquisition modes | Continuous, single frame, multi-frame (to 15 frames) |
Trigger modes | Timed (EPS), trigger width (PWC), trigger controlled, edge dump (RCT), PIV |
Electronic shutter, Timed/PWC exposure | 10 micro s to 2 sec in 1 micro s steps |
Electronic shutter, Auto shutter | 1/17 to 1/100,000 sec. |
Electronic shutter, Exposure sequence | Up to 16 different settings |
Pre-processing functions | Flat field compensation, pixel blemish compensation, 3 x 3 color interpolation (AB-800CL only) |
Control interface | Camera Link serial communication |
Operating temperature | -5° C to 50° C |
Humidity (operation) | 20 - 80% non-condensing |
Storage temp./humidity | -25° C to 60° C / 20% - 80 % non-condensing |
Vibration | 10G (20 Hz to 200 Hz XYZ) |
Shock | 70 G |
Regulations | CE (EN 61000-6-2, EN 61000-6-3), FCC part 15 class B, RoHS/WEEE |
Power | 12V to 24V DC ± 10%. 7.8W typical (full frame @ 12V) |
Lens mount | F-mount or C-mount |
Dimensions (H x W x L), F-mount | 55 mm x 55 mm x 98 mm |
Dimensions (H x W x L), C-mount | 55 mm x 55 mm x 69 mm |
Weight, F-mount | 340 g |
Weight, C-mount | 280 g |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|